Premier Pet In-Ground Fence Add-A-Dog Collar

Introduction

The Premier Pet In-Ground Add-A-Dog collar is designed to expand your existing Premier Pet In-Ground Fence system, allowing you to contain additional dogs within your established boundary. This collar can also serve as a replacement or an extra receiver collar for your current system. It features a tone-only mode for initial training and adjustable static correction levels to suit your dog's temperament.

Product Features

• Expandable System: Allows for the addition of any number of dogs to your existing Premier Pet In-Ground Fence.
• Training Mode: Initially set to tone-only mode for gentle training.
• Adjustable Correction: Features multiple static correction levels to customize training for your dog.
• Waterproof Design: The collar is designed to be waterproof for durability and use in various weather conditions.
• Battery Operated: Requires one Lithium Metal battery (RFA-67 type) for operation.

Package Contents

Please verify that all items are present in your package:

• Premier Pet In-Ground Add-A-Dog Receiver Collar (GIG00-16350)
• One (1) Lithium Metal Battery (RFA-67)
• Contact Points (pre-installed or included separately)

Setup

1. Battery Installation

1. Locate the battery compartment on the receiver collar. This is typically a circular cap on the side of the unit.
2. Using a coin or flat-head screwdriver, turn the battery cap counter-clockwise to open.
3. Insert the RFA-67 Lithium Metal battery with the positive (+) side facing up, as indicated inside the compartment.
4. Replace the battery cap and turn it clockwise until it is securely tightened. Ensure a snug fit to maintain the collar's waterproof integrity.

2. Collar Fitting

Proper fit of the receiver collar is crucial for effective operation and your dog's comfort.

• Place the collar around your dog's neck so that the receiver unit is positioned centrally under their chin or on the side of their neck.
• Adjust the strap so that the contact points touch your dog's skin. You should be able to fit one finger snugly between the contact points and your dog's neck.
• Ensure the collar is not too tight, which could cause discomfort, or too loose, which could prevent consistent contact.

3. Initial Tone-Only Mode

When first taken out of the box and the battery is installed, this collar will be set to tone-only mode. This is the recommended starting point for training your dog to the fence boundary.

4. Adjusting Correction Levels

The collar offers adjustable static correction levels. To cycle through the static correction levels:

• Locate the button on the receiver unit (often indicated by an arrow or a similar symbol).
• Press the button repeatedly to cycle through the available static correction levels. Each press typically increases the level.
• Choose the level that is most effective for your dog's temperament and response during training. Start with the lowest effective level and increase only if necessary.

Operating the Collar

Once set up, the Add-A-Dog collar operates in conjunction with your existing Premier Pet In-Ground Fence transmitter.

• As your dog approaches the boundary wire, the collar will first emit an audible warning tone. This tone serves as a signal for your dog to turn back.
• If your dog continues past the warning zone and enters the correction zone, the collar will deliver a static correction at the level you have selected.
• Consistent training is essential to teach your dog to associate the warning tone with the boundary and to avoid the correction zone.

Maintenance

• Battery Replacement: Replace the RFA-67 Lithium Metal battery when the collar's indicator light shows low battery or when the collar ceases to function. Ensure the battery cap is securely tightened after replacement to maintain waterproofing.
• Cleaning: Periodically clean the collar strap and receiver unit with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Contact Point Inspection: Regularly check the contact points for dirt or debris that might impede proper contact with your dog's skin. Clean as necessary.
• Button Cap Integrity: The protective cap over the adjustment button is essential for the collar's longevity and waterproofing. Inspect this cap regularly for any signs of wear or damage. If the cap is missing or damaged, the collar's functionality and water resistance may be compromised. Consider protecting this area with electrical tape if the cap is lost and a replacement is unavailable.
• Strap Condition: Inspect the collar strap for any signs of fraying or damage. Replace the strap if it becomes worn to ensure the collar remains securely on your dog.

Troubleshooting

• Collar Not Working / No Correction:
  • Check the battery. Ensure it is correctly installed and has sufficient charge. Replace with a new RFA-67 battery if necessary.
  • Verify the collar is properly fitted and the contact points are making consistent contact with your dog's skin.
  • Ensure your in-ground fence transmitter is powered on and functioning correctly.
  • Test the collar within the boundary area to confirm it is receiving the signal from the fence wire.
• Collar Beeping Continuously: This may indicate a low battery or an issue with the fence signal. Check the battery first.
• Dog Not Responding to Correction:
  • Increase the static correction level.
  • Ensure the contact points are making good skin contact. You may need longer contact points for dogs with thick fur.
  • Re-evaluate your training approach and ensure consistency.

Product Images

Specifications

Warranty and Support

Specific warranty information for the Premier Pet In-Ground Add-A-Dog collar (Model GIG00-16350) is not provided in this manual. For detailed warranty terms, product registration, or technical support, please refer to the official Premier Pet website or contact their customer service directly. Keep your proof of purchase for any warranty claims.

Contact Information: Please visit the Premier Pet official website for the most up-to-date contact details for customer support.