1. Introduction and Overview
This manual provides instructions for the SANYO FXGF TV Remote Control. This remote is designed to operate various Sanyo and Fisher television and VCR units, offering control over essential functions such as power, channel selection, volume adjustment, and playback controls.
Image 1.1: Front view of the SANYO FXGF TV Remote Control, displaying the full button layout including power, channel, volume, number pad, and playback controls.
2. Setup
2.1 Battery Installation
The SANYO FXGF remote control requires two (2) AA batteries for operation. Batteries are not included with the remote control.
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch (if present) to open the compartment.
- Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Note: Always replace both batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.
3. Operating Instructions
3.1 Mode Selection
The remote control features dedicated buttons for selecting the device you wish to control:
- TV: Press this button to control your television.
- VCR: Press this button to control your VCR.
- CABLE: Press this button to control a connected cable box.
Ensure the correct mode button is pressed before attempting to control a specific device.
3.2 Basic Functions
- POWER: Turns the selected device on or off.
- VOL (+/-): Increases or decreases the volume.
- CH (+/-): Changes the channel up or down.
- MUTE: Silences the audio. Press again to restore sound.
- NUMBER PAD (0-9): Directly enter channel numbers.
- DISPLAY: Shows on-screen information (e.g., current channel, time).
- MENU: Accesses the on-screen menu of the selected device.
- CH-RECALL: Switches between the current and previously viewed channel.
- CAPTION: Activates or deactivates closed captions.
3.3 VCR Playback Controls
When in VCR mode, the following buttons control VCR functions:
- PLAY: Starts tape playback.
- STOP: Stops tape playback.
- PAUSE: Pauses tape playback. Press again to resume.
- REC: Initiates recording (requires a blank tape).
- REW/FF (Rewind/Fast Forward): Rewinds or fast forwards the tape.
- RESET: Resets the VCR's tape counter.
4. Compatibility
The SANYO FXGF remote control (PN: 6450235757) is an OEM (Original Equipment Manufacturer) remote designed for specific Sanyo and Fisher models. It supports all features for the following models and part numbers:
- SANYO: AVM2587, DS27780, DS27880, AVM-2588, AVM-2588G, DS25580, DS27580, DS31580, DS35580, AVM3257, DS25760, DS35750, AVM3258, AVM3258G, AVM3658, AVM3658G, AVM3256, DS31650
- FISHER: PC-6532, PC-6532U, PC-6627, PC-32S80, PC-6527, PC-7627, PC-7627AV
- AIWA: TV-S2400, TV-S2700
Associated Part Numbers include: 6450268267, 6450268243, 6450145339, 6450268236, 6450235771, 6450246265, 6450268212, 6450145346, 6450268229, 6450145353, 6450235788, 514750001, 6450305740.
5. Maintenance
To ensure optimal performance and longevity of your remote control, follow these maintenance guidelines:
- Cleaning: Wipe the remote control regularly with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials.
- Battery Replacement: Replace batteries promptly when the remote's performance degrades or it stops responding. Remove batteries if the remote will not be used for an extended period to prevent leakage.
- Storage: Store the remote in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Avoid Drops: Protect the remote from physical impact, as drops can damage internal components.
6. Troubleshooting
If you experience issues with your SANYO FXGF remote control, consider the following troubleshooting steps:
- Remote Not Responding:
- Check battery orientation: Ensure batteries are inserted with correct polarity (+/-).
- Replace batteries: Install fresh AA batteries.
- Clear line of sight: Ensure there are no obstructions between the remote and the device's infrared sensor.
- Check device mode: Verify that the correct mode button (TV, VCR, CABLE) is selected for the device you are trying to control.
- Specific Buttons Not Working:
- Clean buttons: Dirt or debris might be interfering with button contacts. Gently clean around the affected buttons.
- Test in different modes: Some buttons are specific to certain modes (e.g., VCR playback controls).
- Interference: Bright lights, especially fluorescent or LED lighting, can sometimes interfere with infrared signals. Try operating the remote in different lighting conditions.
If the issue persists after trying these steps, the remote control may require replacement.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | SANYO |
| Model Number | FXGF |
| Connectivity Technology | Infrared |
| Controller Type | Button Control |
| Compatible Devices | Television, VCR, Cable Box (depending on model) |
| Batteries Required | 2 AA batteries (not included) |
| Special Feature | Ergonomic design |
Image 7.1: Close-up view of the SANYO brand logo and model designation 'FXGE' located on the lower part of the remote control.
8. Warranty and Support
Specific warranty information for the SANYO FXGF TV Remote Control is not provided in the product details. For warranty claims or technical support, please refer to the documentation that came with your original Sanyo or Fisher device, or contact Sanyo customer service directly.
You may also visit the official Sanyo website for support resources or to locate authorized service centers.
