NIXON Lodown II

NIXON Lodown II Watch User Manual

Model: Lodown II

1. Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your NIXON Lodown II Watch. Designed for water enthusiasts, this digital watch offers precise timekeeping, pre-programmed tide information for over 270 beaches worldwide, and additional functions such as dual time, alarms, countdown timer, and a chronograph.

Please read this manual thoroughly to ensure proper use and to maximize the functionality of your watch.

2. Watch Features Overview

The NIXON Lodown II Watch is equipped with several key features:

  • Digital Display: Clear and easy-to-read time and data.
  • Pre-programmed Tide Information: Access tide data for over 270 beaches globally.
  • Dual Time: Track time in two different time zones simultaneously.
  • Alarms: Set daily alarms.
  • Countdown Timer: For various timing needs.
  • Chronograph: Stopwatch function for measuring elapsed time.
  • Backlight: For visibility in low-light conditions.
  • Water Resistance: Up to 100 meters (10 ATM).
  • Durable Construction: Molded polycarbonate housing and polyurethane strap.

3. Setup

Upon first use or after a battery change, you may need to set the time, date, and your preferred tide location.

3.1 Initial Time and Date Setting

  1. Press and hold the MODE button (usually bottom-left) until the time display begins to flash. This indicates you are in setting mode.
  2. Use the ADJUST button (usually top-right) to cycle through the settings (hours, minutes, year, month, day).
  3. Use the SET button (usually bottom-right) to increase the flashing value.
  4. Once all settings are correct, press the MODE button again to exit setting mode.

3.2 Selecting Tide Location

The Lodown II comes pre-programmed with tide data. To select your desired beach:

  1. From the Time mode, press the MODE button repeatedly until you reach the TIDE display mode.
  2. Press and hold the SET button until the beach name begins to flash.
  3. Use the ADJUST button to scroll through the pre-programmed beach locations.
  4. Once your desired beach is displayed, press the SET button to confirm and exit.

4. Operating Instructions

4.1 Mode Navigation

Press the MODE button (typically bottom-left) to cycle through the various functions:

  • Time (main display)
  • Tide
  • Chronograph (Stopwatch)
  • Countdown Timer
  • Alarm
  • Dual Time

4.2 Time Mode

Displays current time, day of the week, and date. Press the LIGHT button (typically top-left) to activate the backlight.

4.3 Tide Mode

Shows current tide status for the selected beach. Information typically includes high/low tide times and heights. Refer to section 3.2 for changing the tide location.

4.4 Chronograph (Stopwatch)

  1. Navigate to Chronograph mode using the MODE button.
  2. Press the START/STOP button (typically top-right) to begin timing.
  3. Press START/STOP again to pause/resume.
  4. Press the RESET button (typically bottom-right) to clear the time to zero.

4.5 Countdown Timer

  1. Navigate to Countdown Timer mode.
  2. Press and hold the SET button to enter setting mode.
  3. Use ADJUST and SET buttons to set the desired countdown time (hours, minutes, seconds).
  4. Press MODE to exit setting mode.
  5. Press START/STOP to begin the countdown. An alarm will sound when the timer reaches zero.

4.6 Alarm

  1. Navigate to Alarm mode.
  2. Press and hold the SET button to enter setting mode.
  3. Use ADJUST and SET buttons to set the desired alarm time.
  4. Press MODE to exit setting mode.
  5. Press the ADJUST button to toggle the alarm ON/OFF. An alarm icon will appear when active.

4.7 Dual Time

  1. Navigate to Dual Time mode.
  2. Press and hold the SET button to enter setting mode.
  3. Use ADJUST and SET buttons to set the second time zone.
  4. Press MODE to exit setting mode.

5. Maintenance

5.1 Cleaning Your Watch

To maintain the appearance and longevity of your NIXON Lodown II Watch:

  • Wipe the watch case and strap with a soft, damp cloth.
  • For stubborn dirt, use a mild soap solution and rinse thoroughly with fresh water.
  • Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch materials.
  • Ensure the watch is completely dry before storing or wearing.

5.2 Battery Replacement

When the display becomes dim or functions become erratic, it may be time to replace the battery. NIXON recommends having the battery replaced by an authorized service center to ensure the watch's water resistance is maintained. Attempting to replace the battery yourself may void the warranty and compromise the watch's seals.

5.3 Water Resistance

Your NIXON Lodown II Watch is water resistant up to 100 meters (10 ATM). This makes it suitable for swimming, snorkeling, and surfing. However, it is not recommended for scuba diving.

  • Do not operate buttons while the watch is submerged in water.
  • Avoid exposing the watch to extreme temperature changes (e.g., hot showers followed by cold water).
  • After exposure to saltwater, rinse the watch thoroughly with fresh water and dry it with a soft cloth.

6. Troubleshooting

If you encounter issues with your NIXON Lodown II Watch, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
Display is blank or dim.Low or dead battery.Replace the battery (recommended by authorized service).
Buttons are unresponsive.Watch may be in a locked mode or internal malfunction.Try pressing all buttons firmly. If issue persists, contact support.
Incorrect time or date.Time/date not set correctly or battery low.Refer to Section 3.1 to reset time/date. Consider battery replacement.
Tide data is inaccurate.Incorrect beach selected or watch needs synchronization.Verify the correct beach is selected (Section 3.2). Ensure time and date are accurate.

If the problem persists after attempting these solutions, please contact NIXON customer support for further assistance.

7. Specifications

  • Model: Lodown II
  • Face Material: Acrylic Crystal
  • Housing Material: Molded Polycarbonate
  • Strap Material: Molded Polyurethane
  • Chronograph: Yes
  • Backlight: Yes
  • Water Resistance Depth: 100 Meters (10 ATM)
  • Item Weight: Approximately 0.5 Pounds
  • Item Dimensions (LxWxH): Approximately 5 x 4 x 4 inches

8. Warranty and Support

NIXON products are manufactured to high-quality standards and are covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official NIXON website.

For customer support, service inquiries, or to find an authorized service center, please visit the NIXON website or contact their customer service department directly. Contact information can typically be found on the NIXON official website.

Note: No product images or videos were available for embedding based on the provided data.