NOCO NUSB211NA

NOCO NUSB211NA 10W USB Power Adapter User Manual

Model: NUSB211NA | Brand: NOCO

Introduction

This manual provides essential information for the safe and efficient use of your NOCO NUSB211NA 10-Watt USB Power Adapter. The NUSB211NA is designed to rapidly recharge various USB devices, including smartphones, tablets, and NOCO Genius Boost UltraSafe Lithium Jump Starters. It features a single 2.1-Amp port with built-in device detection.

Safety Information

Always read and understand all safety information before using this product. Failure to follow these instructions may result in electrical shock, fire, or serious injury.

  • Do not expose the adapter to rain or wet conditions.
  • Do not operate the adapter if it has received a sharp blow, been dropped, or otherwise damaged.
  • Do not disassemble the adapter. Refer to qualified service personnel for servicing.
  • To reduce the risk of electric shock, unplug the adapter from the outlet before attempting any maintenance or cleaning.
  • Use only with compatible USB cables. The adapter does not include a USB charging cable.
  • This product is intended for indoor use only.

Product Features

  • 10-watt USB wall charger for recharging smartphones, tablets, and more.
  • Single port, 2.1-Amp output for rapid charging.
  • Built-in device detection for optimal charging.
  • Energy efficient and safe design, including integrated automatic shutoff protection.
  • High-density energy device that is lightweight, compact, and portable.
  • Includes the 10-watt USB wall charger; USB charging cables are not included.
NOCO NUSB211NA charger highlighting features like device detection, automatic shutoff, and energy efficiency.

The NOCO NUSB211NA charger incorporates advanced features such as device detection, automatic shutoff, and energy efficiency for safe and optimized charging.

Setup

Setting up your NOCO NUSB211NA is straightforward. Follow these steps to begin charging your devices.

  1. Unpack the Charger: Carefully remove the NUSB211NA wall charger from its packaging. Note that USB charging cables are sold separately.
  2. Connect USB Cable: Obtain a compatible USB charging cable for your device. Insert the USB-A end of your charging cable into the USB port on the NOCO NUSB211NA wall adapter.
  3. Plug into Power Outlet: Plug the NOCO NUSB211NA wall adapter into a standard 120-240 VAC 50-60Hz wall outlet.
  4. Connect to Device: Connect the other end of your USB charging cable to your device (e.g., smartphone, tablet, NOCO jump starter). The charger will automatically detect the device and begin charging.
NOCO NUSB211NA charger with a USB cable plugged in, indicating it's made for Boost and other devices.

The NOCO NUSB211NA is designed to be compatible with NOCO Boost jump starters and a wide range of other USB-A devices.

NOCO NUSB211NA charger shown with various electronic devices, emphasizing its universal compatibility.

This charger offers universal compatibility, allowing you to charge any USB-A device, including smartphones, tablets, and other portable electronics.

Operating Instructions

The NOCO NUSB211NA operates automatically once connected. It provides a stable 5V, 2.1A output for efficient charging.

  • Automatic Device Detection: The charger automatically detects the connected device and delivers the optimal charging current up to 2.1 Amps.
  • Rapid Charging: Experience faster charging times compared to lower wattage chargers. For example, charging a GBX55 with the 10W NUSB211NA takes approximately 7.2 hours, significantly faster than 5W (14 hours) or 2.5W (28 hours) chargers.
  • Safety Protections: The adapter includes built-in short circuit, overcurrent, and overvoltage protection to ensure the safety of your devices and the charger itself.
  • Automatic Shutoff: The charger features an integrated automatic shutoff protection to prevent overcharging and conserve energy.
NOCO NUSB211NA charger plugged into a wall outlet, showing a comparison of charge times for a GBX55 with different wattage chargers.

The NUSB211NA provides better performance, significantly reducing charge times for compatible devices like the GBX55 jump starter.

NOCO NUSB211NA charger plugged into a wall outlet, highlighting superior technology with short circuit, overcurrent, and overvoltage protection.

Equipped with superior technology, the charger offers multiple layers of protection, including short circuit, overcurrent, and overvoltage safeguards.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your NOCO NUSB211NA charger.

  • Cleaning: Disconnect the charger from the power outlet and any devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or harsh chemicals.
  • Storage: Store the charger in a cool, dry place when not in use. Avoid extreme temperatures and direct sunlight.
  • Inspection: Periodically inspect the charger for any signs of damage, such as cracks in the casing or bent prongs. If damage is found, discontinue use and contact NOCO support.

Troubleshooting

If you encounter issues with your NOCO NUSB211NA, refer to the following common problems and solutions.

ProblemPossible CauseSolution
Device not charging.Loose connection, faulty USB cable, power outlet issue, incompatible device.Ensure the charger is securely plugged into the wall and the USB cable is firmly connected to both the charger and the device. Try a different USB cable. Test the wall outlet with another device. Confirm your device is compatible with USB-A charging.
Slow charging.High power consumption by device, background apps, or a non-optimal cable.Close unnecessary applications on your device. Ensure you are using a high-quality USB cable. The charger provides 2.1A, which is rapid for many devices, but some devices may have higher charging requirements.
Charger feels warm.Normal operation during charging.It is normal for the charger to become warm during use. If it becomes excessively hot or emits smoke/odor, immediately unplug it and discontinue use.

Specifications

Detailed technical specifications for the NOCO NUSB211NA 10W USB Power Adapter.

SpecificationValue
ModelNUSB211NA
Input100-240 VAC, 50-60Hz, 400mA
Output5V DC, 2.1 Amps (10 Watts)
Item Weight1.2 ounces
Product Dimensions1 x 1 x 1 inches (approx. 3.55 x 2.15 x 4.32 cm)
Country of OriginChina
Special Features5V 2A USB Wall Charger, 120-240 VAC 50-60Hz, Compact Design
Diagram showing the compact dimensions of the NOCO NUSB211NA charger: 1.4 inches (3.55 cm) wide, 0.8 inches (2.15 cm) deep, and 1.7 inches (4.32 cm) tall.

The compact design of the NOCO NUSB211NA makes it highly portable and convenient for travel or everyday use.

Warranty and Support

For warranty information or technical support regarding your NOCO NUSB211NA 10W USB Power Adapter, please refer to the official NOCO website or contact their customer service directly. Keep your purchase receipt for warranty claims.

Visit the official NOCO Store for more products and support: NOCO Store

© 2025 NOCO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.