1. Introduction and Overview
This manual provides essential information for the safe and effective use of your CRST LTS-10TS 10-Outlet Heavy Duty Metal Surge Protector. This robust power strip is designed for demanding environments, offering multiple outlets and advanced surge protection for your electronic devices.
Image 1: The CRST 10-Outlet Heavy Duty Metal Surge Protector, featuring a yellow metal housing and a coiled 15-foot power cord.
2. Important Safety Instructions
To reduce the risk of electric shock, fire, or injury, always follow these basic safety precautions:
- Use Only Indoors: This device is intended for indoor use only. Do not use outdoors or in wet/damp locations.
- Avoid Water: Do not use near water, aquariums, or any other source of moisture.
- Proper Connection: Do not plug this power strip into another relocatable power tap or extension cord. Plug directly into a grounded wall outlet.
- Grounding: Ensure the power strip is connected to a properly grounded outlet.
- Overload Protection: Do not exceed the electrical rating of 15A/1875W.
- Ventilation: Do not cover the power strip or restrict airflow around it.
- Damage Inspection: Inspect the power strip and cord regularly for any damage. Discontinue use if damaged.
3. Product Features
- Sturdy Construction: Features an extruded aluminum housing for durability, suitable for harsh environments.
- 10 Grounded Outlets: Provides ample power connections for multiple devices.
- 15-Foot Heavy Duty Cord: A long, 14 AWG power cord offers extended reach and flexibility.
- 2800 Joules Surge Protection: Protects connected equipment from power surges and spikes.
- 15A Circuit Breaker: Integrated reset On/Off switch with a 15-amp circuit breaker for overload protection.
- Cord Management: Designed with a cord holder to easily wrap and store the 15-foot cord.
- Mountable Design: Includes hanging holes for convenient wall mounting.
Image 2: Detailed view of the power strip highlighting its dimensions (10 x 6.3 x 1.8 inches), super-durable metal housing, surge protector indicator, high reliability switch, hanging hole, and cord management slot.
4. Setup and Installation
4.1 Unpacking
Carefully remove the power strip from its packaging. Retain packaging for future storage or transport.
4.2 Placement
Place the power strip in a dry, indoor location away from any sources of moisture or excessive heat. Ensure the 15-foot cord can reach your desired wall outlet without tension.
4.3 Mounting (Optional)
The power strip features integrated hanging holes on the back for wall mounting. Use appropriate screws (not included) and anchors for your wall type, ensuring they are securely fastened and spaced correctly to align with the mounting holes.
Image 3: Illustration of the power strip's convenient cord management system and how it can be mounted to a surface, contrasting with a messy setup.
5. Operating Instructions
5.1 Connecting to Power
Plug the power strip's 15-foot cord directly into a standard 125V grounded wall outlet. Do not use with extension cords or other power strips.
5.2 On/Off Switch and Circuit Breaker
The power strip features a red rocker switch that acts as both an On/Off control and a 15-amp circuit breaker. Press the switch to the 'ON' position to supply power to the outlets. If an overload occurs, the switch will trip to the 'OFF' position, cutting power to protect connected devices. To reset, unplug some devices, then press the switch back to 'ON'.
5.3 Surge Protection Indicator
A red 'PROTECTED' indicator light is located near the On/Off switch. When this light is illuminated, it indicates that the surge protection feature is active and functioning correctly. If this light is off, the surge protection may have been compromised and the unit should be replaced to ensure continued protection.
6. Maintenance
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Inspection: Periodically inspect the power strip, cord, and plugs for any signs of wear, damage, or overheating.
- Storage: When not in use, utilize the integrated cord management system to neatly wrap the power cord around the unit. Store in a cool, dry, indoor location.
7. Troubleshooting
- No Power to Devices:
- Check if the On/Off switch is in the 'ON' position.
- If the switch has tripped, reduce the load by unplugging some devices and then reset the circuit breaker by pressing the switch back to 'ON'.
- Ensure the power strip is securely plugged into a functioning wall outlet.
- 'PROTECTED' Indicator Light is Off:
- This indicates that the surge protection components may have absorbed a significant surge and are no longer providing protection.
- The power strip will still function as a multi-outlet device, but without surge protection. It is recommended to replace the unit to maintain surge protection for your devices.
8. Specifications
| Specification | Value |
|---|---|
| Electrical Rating | 125V/15A/60Hz |
| Maximum Power Output | 1875W |
| Voltage Protection Rating | 2800 Joules |
| Cord Rating | 14AWG (3x2.08mm²) |
| Cord Length | 15 Feet |
| Overload Protection | 15A Circuit Breaker |
| Product Dimensions (W x H x D) | 10 x 6.3 x 1.8 inches |
| Item Weight | 3.34 pounds |
9. Warranty and Support
CRST is committed to customer satisfaction. Your power strip comes with:
- 18-Month Limited Warranty
- Lifetime Technical Support
For any problems or inquiries, please feel free to contact CRST support:
- Website: www.crsttech.com
- Email: support@crsttech.com
- Phone: +1 (626) 838 8980 (Mon-Fri 9:00 AM-5:00 PM PST)
10. Official Product Videos
10-Outlet Heavy Duty Surge Protector with 15ft Long Cord
Video 1: A brief overview of the CRST 10-Outlet Heavy Duty Surge Protector, showcasing its features and 15-foot cord. Provided by Rocket Socket Technology (Seller).
