OPT7 Sidekick 48" Sequential LED Running Board Lights Instruction Manual

1. Introduction

The OPT7 Sidekick 48" Sequential LED Running Board Lights are designed to enhance vehicle visibility and aesthetics. This kit provides sequential amber turn signals, white courtesy lights, and daytime running lights (DRL) for trucks, pickups, SUVs, and trailers. The lights are built with durable, waterproof materials to withstand various weather conditions.

Image: OPT7 Sidekick 48" Sequential LED Running Board Lights installed on a truck.

2. What's Included

The OPT7 Sidekick Running Board Light kit includes the following components:

• 2 x LED Strips (48 inches each)
• 1 x Adhesive Booster
• 4 x Scotchlok Connectors
• 6 x Mounting Brackets
• 10 x Zip-Ties
• Wiring with waterproof connectors

Image: All components of the OPT7 Sidekick Running Board Light kit, including LED strips, connectors, mounting brackets, and zip ties.

3. Installation Guide

Follow these steps for proper installation of your OPT7 Sidekick Running Board Lights. Professional installation is recommended for optimal results.

3.1. Preparation

1. Clean the Surface: Thoroughly clean the mounting surface on your vehicle's running boards. Ensure it is free of dirt, dust, and grease. Use the provided adhesive booster for enhanced adhesion.
2. Test the Lights: Before permanent installation, connect the lights to a 12V power source (e.g., cigarette lighter port) to verify all functions are working correctly.

3.2. Mounting the LED Strips

3. Apply Adhesive: Peel off the backing from the 3M adhesive tape on the LED strips. Carefully position and press the strips onto the cleaned running board surface.
4. Secure with Brackets: For a more secure fit, use the provided mounting brackets and screws. It is highly recommended to lock the light strip with wiring snap locks to strengthen the fixation.

Image: Visual guide showing the four installation steps: Clean the surface, Stick the LED strip, Lock with brackets, and Connect the wiring.

3.3. Wiring Connections

The Sidekick Running Board Lights feature a 3-in-1 wiring system for various functions:

• White Wire: Connect to a 12V+ Door Assist circuit. This activates the white courtesy lights when the doors are opened.
• Red Wire: Connect to a 12V+ Parking Lights circuit. This enables the amber daytime running lights (DRL).
• Yellow Wire: Connect to a 12V+ Turn Signal circuit. This activates the sequential amber turn signals.
• Black Wire: Connect to a reliable Ground (-) source.

Use the provided Scotchlok connectors for secure and insulated wiring connections. Ensure all connections are waterproofed to prevent damage.

3.4. Compatibility and Placement

The 48" sequential lights are designed for universal fit on various trucks, pickups, and SUVs. Refer to the following guide for typical cab types compatible with 48" lights:

Image: Truck cab compatibility guide for 48-inch running board lights, including Ford F150, Chevy Silverado/GMC Sierra 1500, RAM 1500, and Toyota Tacoma regular cab models.

3.5. Installation Video

4. Operating Instructions

The OPT7 Sidekick Running Board Lights offer multiple lighting functions for enhanced visibility and safety.

4.1. Lighting Functions

• Sequential Amber Turn Signals: When the turn signal is activated, the amber LEDs will illuminate in a sequential pattern, clearly indicating your turning direction.
• White Courtesy Light (Door Assist): When a door is opened, the white LEDs will automatically illuminate, providing light for passengers entering or exiting the vehicle.
• Amber Daytime Running Lights (DRL): When connected to the parking light circuit, the amber LEDs will function as DRLs, increasing vehicle visibility during the day.

Image: Illustration of the full functional running board light, demonstrating running light, right turn, left turn, and door assist features.

4.2. Operation Video

5. Maintenance

To ensure the longevity and optimal performance of your OPT7 Sidekick Running Board Lights, follow these maintenance guidelines:

• Regular Cleaning: Periodically clean the LED strips with a soft cloth and mild soap to remove dirt and road grime. Avoid abrasive cleaners that could damage the housing.
• Inspect Connections: Regularly check all wiring connections for any signs of wear, corrosion, or looseness. Ensure waterproof seals are intact.
• Adhesive Check: Periodically inspect the adhesive and mounting brackets to ensure the strips remain securely attached to the running boards.

6. Troubleshooting

If you encounter issues with your OPT7 Sidekick Running Board Lights, refer to the following common troubleshooting tips:

• Lights Not Illuminating:
  • Check all power and ground connections to ensure they are secure and properly wired.
  • Verify the 12V power source is active.
  • Inspect the inline fuse (if applicable) for the power connection.
• Incorrect Functionality (e.g., Turn Signal not sequential):
  • Double-check that the correct wires (white, red, yellow) are connected to their respective vehicle circuits (door assist, parking lights, turn signal).
  • Ensure no wires are short-circuited or damaged.
• Vehicle Error Codes:
  • Some modern vehicles may detect additional current draw and trigger error codes. This often requires the use of relays for proper wiring, especially for turn signals and running lights. Consult a professional automotive electrician if this occurs.
• Lights Flickering or Dim:
  • Ensure a stable 12V power supply.
  • Check for loose connections or inadequate grounding.

7. Specifications

8. Warranty and Support

OPT7 stands behind its products. The Sidekick Running Board Lights come with a One Year Limited Warranty. Free Lifetime Technical Support is also provided to assist with any questions or issues you may encounter.

For further assistance, please visit the OPT7 Store or contact their customer support.