BABY born City RC Scooter Instruction Manual

1. Product Overview

The BABY born City RC Scooter is an exciting accessory designed for BABY born dolls up to 43 cm. It features remote control functionality, allowing the scooter to move forward and backward, and includes realistic light effects such as flashing turn signals. This product is intended to enhance imaginative play and provide interactive fun.

Figure 1: The BABY born City RC Scooter, remote control, and included sticker sheets.

2. Safety Information

WARNING!

• Not suitable for children under 36 months.
• Contains small parts. Choking hazard.

3. What's in the Box

Please check the contents of the package to ensure all items are present:

• 1 x BABY born City RC Scooter
• 1 x Remote Control
• 2 x Sticker Sheets for decoration

4. Setup

4.1 Battery Installation

The BABY born City RC Scooter and its remote control require batteries for operation. Batteries are not included.

1. Locate the battery compartments on both the scooter and the remote control.
2. Using a screwdriver (not included), open the battery compartment covers.
3. Insert the required batteries, ensuring correct polarity (+/-) as indicated inside the compartment. We recommend using brand-name alkaline manganese batteries (alkaline) for optimal performance, as they offer higher capacity, lower self-discharge, and better leak resistance compared to zinc-carbon batteries.
4. Close the battery compartment covers securely.

Note: Do not use rechargeable batteries if their voltage is lower than 1.5 volts, as this can affect performance. Always check the batteries in both the remote control and the scooter if you experience issues.

Figure 2: The scooter and remote control as packaged, indicating the need for initial setup and battery installation.

5. Operating Instructions

Once batteries are installed, you can begin operating your BABY born City RC Scooter.

1. Place your BABY born doll (up to 43 cm) securely on the scooter's seat.
2. Turn on the main power switch located on the scooter.
3. Use the 4-way remote control to steer the scooter:
• Press the forward button to move the scooter straight ahead.
• Press the backward button to move the scooter in reverse.
• Use the left and right buttons to turn the scooter. The corresponding turn signals will flash during turns.
4. The scooter is designed to operate best on smooth, flat surfaces.

Tip: If the scooter becomes unresponsive after a period of inactivity, turn the main power switch off and then on again to reactivate it.

Figure 3: A BABY born doll positioned on the City RC Scooter, ready for play.

Figure 4: A detailed view of the scooter's front, highlighting the functional headlights and turn signals.

6. Maintenance

To ensure the longevity and proper functioning of your BABY born City RC Scooter, follow these maintenance guidelines:

• Cleaning: Wipe the scooter and remote control with a soft, damp cloth. Do not immerse in water.
• Battery Care: Always remove batteries from both the scooter and the remote control if the product will not be used for an extended period. This prevents potential battery leakage and damage.
• Storage: Store the product in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically check for any loose screws, damaged parts, or frayed wires. Do not use the product if any damage is found.

Figure 5: Rear view of the scooter, illustrating its design for easy cleaning and inspection.

7. Troubleshooting

If you encounter issues with your BABY born City RC Scooter, refer to the following common problems and solutions:

Figure 6: A child interacting with the scooter and remote, demonstrating typical usage scenarios where troubleshooting might be needed.

8. Specifications

9. Warranty and Support

For information regarding warranty, returns, or technical support, please refer to the product packaging or contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty claims.