OMNIHIL AC/DC Power Adapter

Omnihil AC/DC Power Adapter for Weighmax W-2809 Digital Postal Scale User Manual

Model: AC/DC Power Adapter

1. Introduction

This manual provides essential information for the safe and effective use of your Omnihil AC/DC Power Adapter. This adapter is specifically designed to provide power to the Weighmax W-2809 Digital Postal Scale. Please read these instructions carefully before use and retain them for future reference.

2. Safety Information

To ensure safe operation and prevent damage, observe the following safety guidelines:

  • UL LISTED: This adapter is UL listed, indicating it meets recognized safety standards.
  • Protection Features: The adapter incorporates OVP (Over Voltage output Protection), OCP (Over Current output Protection), and SCP (Short Circuit output Protection) to safeguard your device.
  • Do not expose the adapter to water, moisture, or extreme temperatures.
  • Do not attempt to disassemble or modify the adapter.
  • Ensure the power outlet matches the adapter's input voltage range (100V ~ 240V).
  • Keep out of reach of children.

3. Setup

Follow these steps to set up your Omnihil AC/DC Power Adapter:

  1. Inspect the Adapter: Before use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
  2. Connect to Device: Locate the power input port on your Weighmax W-2809 Digital Postal Scale. Insert the barrel connector of the Omnihil power adapter firmly into this port.
  3. Connect to Power Outlet: Plug the AC prongs of the adapter into a standard wall power outlet (100V ~ 240V).
Omnihil AC/DC Power Adapter with barrel connector detail

Image: The Omnihil AC/DC Power Adapter showing the barrel connector, ready for connection to a device.

4. Operating Instructions

Once the adapter is connected as described in the Setup section:

  • Ensure the Weighmax W-2809 Digital Postal Scale is switched off before connecting the adapter.
  • After connecting the adapter to both the scale and the power outlet, you may now power on your Weighmax W-2809 Digital Postal Scale.
  • The adapter will provide continuous power to the scale.
  • To disconnect, first power off the scale, then unplug the adapter from the wall outlet, and finally disconnect the barrel connector from the scale.
Omnihil AC/DC Power Adapter main view

Image: Main view of the Omnihil AC/DC Power Adapter, showing the power brick and coiled cable.

5. Maintenance

Proper care will extend the life of your power adapter:

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
  • Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
  • Cable Care: Do not bend, twist, or pull the cable excessively. Avoid placing heavy objects on the cable.

6. Troubleshooting

If you encounter issues with your power adapter, consider the following:

  • No Power to Device:
    • Ensure the adapter is securely plugged into both the wall outlet and the Weighmax W-2809 Digital Postal Scale.
    • Verify the wall outlet is functional by testing it with another device.
    • Check for any visible damage to the adapter or cable. If damaged, discontinue use.
  • Device Not Charging/Powering On: Confirm that the Weighmax W-2809 Digital Postal Scale is compatible with this specific adapter.
  • If the issue persists after checking these points, contact customer support.

7. Specifications

FeatureSpecification
Adapter RatingWorld Wide 100V ~ 240V 50/60Hz
Cord Length8 Feet (approximately 2.4 meters)
Safety CertificationUL LISTED
Protection FeaturesOVP, OCP, SCP
Product Dimensions3 x 3 x 2 inches (approximate adapter block size)
Item Weight4 ounces
Compatible DevicesWeighmax W-2809 Digital Postal Scale

8. Warranty and Support

Your Omnihil AC/DC Power Adapter comes with a 5-Year Free Warranty. This warranty covers manufacturing defects under normal use. For warranty claims or technical support, please contact Omnihil customer service through the retailer where the product was purchased or visit the official Omnihil store online.

5 Year Warranty badge

Image: A circular badge indicating a '5 Year Warranty'.

For more information about OMNIHIL products, please visit the OMNIHIL Store.

Related Documents - AC/DC Power Adapter

Preview SOLAR AC DC Hybrid AC/DC Split System Air Conditioner Installation Manual
Comprehensive installation manual for the SOLAR AC DC Hybrid AC/DC Split System Air Conditioner, Quick Connect Model, featuring R32 refrigerant. Covers installation procedures, safety precautions, technical specifications, and troubleshooting for models DGWA2-ACDC-12KR2, DGWA1-ACDC-18KR2, DGWA1-ACDC-24KR2, and others.
Preview KTEC KSD-45W-250180HU Class 2 Power Supply Technical Specification
Detailed technical specifications for the KTEC KSD-45W-250180HU Class 2 Power Supply, covering input/output requirements, mechanical properties, regulatory compliance, environmental conditions, physical dimensions, and UL certification details.
Preview My Weigh iBalance 2500 Digital Scale User Manual
Comprehensive user manual for the My Weigh iBalance 2500 digital scale, covering operation, features, calibration, and specifications. Learn how to use your precision scale effectively for accurate measurements.
Preview FSP FSP0XX-DHAN3 Series 30W-40W 12V Adapters: Technical Datasheet
Technical datasheet for FSP FSP0XX-DHAN3 series 30W-40W 12V AC to DC adapters, detailing features, specifications, safety approvals, and performance characteristics for ITE applications.
Preview VEVOR P5H Shipping Scale User Manual
Detailed user manual for the VEVOR P5H Shipping Scale, covering specifications, operation, battery installation, calibration, and care instructions.
Preview EG4 AC/DC Plug-N-Cool Solar Air Conditioner Installation & Owner's Manual
Comprehensive guide for installing and operating the EG4 AC/DC Plug-N-Cool Solar Air Conditioner. Covers safety precautions, mounting instructions for indoor and outdoor units, refrigerant handling, electrical connections, solar module installation, testing, maintenance, and troubleshooting.