InnoGear AD308

InnoGear AD308 Real Bamboo Essential Oil Diffuser

Model: AD308 | Brand: InnoGear

Important Safeguards

To reduce the risk of electric shock, fire, or injury, please read all instructions carefully before using this appliance.

  • Always place the diffuser on a flat, stable surface.
  • Do not exceed the MAX water line when filling the water tank.
  • Ensure the lid is properly secured before operating.
  • Do not allow water to flow into the air outlet when pouring.
  • Unplug the diffuser from the power outlet when not in use or before cleaning.
  • Keep out of reach of children and pets.
  • This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Use only the provided power adapter.
  • Do not immerse the diffuser in water or any other liquid.
  • Clean the diffuser regularly after every 3 uses to prevent mineral buildup and ensure optimal performance.

Product Diagram

Diagram showing the upgraded air outlet design and drain side of the InnoGear AD308 diffuser.

Upgraded Air Outlet Design: This diagram highlights the specially designed air outlet and the drain side. When pouring water, avoid the air outlet to prevent damage.

Diagram showing the dimensions of the InnoGear AD308 diffuser: 3.9 inches diameter, 7.9 inches height, and 160ml capacity.

Product Dimensions: The diffuser measures approximately 3.9 inches in diameter and 7.9 inches in height, with a 160ml water capacity.

Specifications

Model NumberAD308
MaterialBPA-free Bamboo
Water Capacity160 ml
Timer Settings1 Hr / 2 Hrs
Misting ModesIntermittent (mist and pause per 10s) / Continuous
Power10 W
Voltage110-240 V
Automatic ShutoffYes (when water level is low)
LED Light7-Color (adjustable)
Dimensions3.94 x 7.87 x 3.94 inches
Weight1.15 Pounds

Package Contents

  • 1 x InnoGear AD308 Essential Oil Diffuser
  • 1 x Measuring Cup
  • 1 x Power Adapter
  • 1 x User Manual

Setup

  1. Place the Diffuser: Position the diffuser on a flat, stable, and water-resistant surface.
  2. Remove the Lid: Gently remove the bamboo outer cover and the inner lid.
  3. Add Water: Using the provided measuring cup, fill the water tank with clean tap water up to the MAX line (160ml). Do not overfill.
  4. Add Essential Oil: Add 3-5 drops of your preferred essential oil directly into the water tank. Adjust the amount based on personal preference.
  5. Replace Lids: Securely place the inner lid back, followed by the bamboo outer cover. Ensure both are properly aligned.
  6. Connect Power: Plug the power adapter into the diffuser's power input port, then plug the adapter into a standard electrical outlet.

Video: InnoGear Upgraded Real Bamboo Diffuser Setup. This video demonstrates the process of setting up and operating the InnoGear AD308 diffuser, including adding water and essential oils, and activating mist and light functions.

Operating Instructions

Mist Control

  • Press the Mist Button (left button) once to turn on continuous mist mode.
  • Press the Mist Button a second time for intermittent mist mode (mists for 10 seconds, pauses for 10 seconds).
  • Press the Mist Button a third time to set the timer for 1 hour.
  • Press the Mist Button a fourth time to set the timer for 2 hours.
  • Press the Mist Button a fifth time to turn off the mist function.
  • The diffuser will automatically shut off when the water level is low, regardless of the timer setting.

Light Control

  • Press the Light Button (right button) once to turn on the 7-color changing LED light.
  • Press the Light Button again to fix the light to a specific color. Each press will cycle through the available colors.
  • Press and hold the Light Button for 2 seconds to turn off the light.

Maintenance

Regular cleaning is essential to ensure the longevity and optimal performance of your diffuser. Clean the diffuser after every 3 uses or when changing essential oils.

Cleaning Procedure

  1. Unplug: Disconnect the diffuser from the power outlet.
  2. Empty Water: Remove the lids and carefully pour out any remaining water from the drain side of the tank. Avoid pouring water into the air outlet.
  3. Wipe Tank: Use a soft cloth or cotton swab with a small amount of mild dish soap to gently wipe the inside of the water tank and the ultrasonic plate.
  4. Rinse: Rinse the tank with clean water, again being careful to avoid the air outlet.
  5. Dry: Wipe all parts dry with a clean, soft cloth. Ensure all components are completely dry before reassembling or storing.
  6. Lid Cleaning: Wipe the bamboo lid with a damp cloth and dry thoroughly.

Note: Do not use harsh detergents, solvents, or abrasive cleaners, as these may damage the diffuser.

Troubleshooting

ProblemPossible CauseSolution
No mist or low mist output
  • Insufficient water in the tank.
  • Water level exceeds the MAX line.
  • Water or essential oil residue on the ultrasonic plate.
  • Air outlet blocked.
  • Add water to the appropriate level.
  • Empty some water if overfilled.
  • Clean the ultrasonic plate as per maintenance instructions.
  • Ensure the air outlet is clear and not obstructed.
Diffuser does not turn on
  • No power connection.
  • Water level too low (auto-off activated).
  • Power adapter not properly connected.
  • Check if the power adapter is securely plugged into both the diffuser and the wall outlet.
  • Refill the water tank to the appropriate level.
  • Ensure the correct power adapter is used.
No scent or weak scent
  • Insufficient essential oil.
  • Poor quality essential oil.
  • Diffuser needs cleaning.
  • Add more drops of essential oil.
  • Use high-quality, pure essential oils.
  • Clean the diffuser thoroughly.

Warranty and Support

For warranty information or technical support, please contact InnoGear customer service. Refer to the contact details provided with your purchase or visit the official InnoGear website.

Website: InnoGear Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.