BoJia Feeke Electric Lint Remover BJ-930 User Manual

Introduction

This manual provides essential instructions for the safe and effective use of your BoJia Feeke Electric Lint Remover BJ-930. Please read this manual thoroughly before operating the device and retain it for future reference.

Safety Instructions

• Keep the device out of reach of children.
• Do not use the device on wet fabrics.
• Ensure the protective cap is in place when not in use.
• Exercise caution when handling the blades during cleaning to prevent injury.
• Do not press excessively hard on fabrics to avoid damage.
• Only use the device for its intended purpose of removing lint and pills from fabric.

Package Contents

Upon opening the package, please verify that all the following items are included:

• 1 x BoJia Feeke Electric Lint Remover BJ-930
• 1 x Cleaning Brush
• 1 x Protective Cap
• 1 x Instruction Manual (this document)

Product Overview

An image of the BoJia Feeke Electric Lint Remover BJ-930, showcasing its ergonomic design and lint collection head. The device is sky blue with a grey power button.

The BoJia Feeke Electric Lint Remover BJ-930 is designed to refresh various fabrics by removing lint, fuzz, and pills. It features a stainless steel rotary blade and a large shaving head for efficient operation. The device is battery-operated for portability and convenience.

Setup

Battery Installation

1. Locate the battery compartment cover on the handle of the lint remover.
2. Slide or unclip the cover to open the compartment.
3. Insert two (2) AA batteries (not included), ensuring correct polarity (+/-) as indicated inside the compartment.
4. Replace the battery compartment cover securely.

Note: If the battery cover frequently detaches, use two hands to hold it in place while turning the device on.

Operating Instructions

Using the Lint Remover

1. Ensure the fabric item is clean and dry.
2. Lay the fabric item flat on a hard, smooth surface. Stretch the fabric taut if necessary to prevent snagging.
3. Remove the protective cap from the shaving head.
4. Press the power button to turn on the device.
5. Gently glide the shaving head over the pilled or lint-covered area. Avoid applying excessive pressure.
6. For stubborn pills, move the device back and forth, then in a circular motion over the affected area.
7. Continue until the desired smoothness is achieved.
8. After use, press the power button to turn off the device and replace the protective cap.

The device is suitable for various materials including sweaters, couches, blankets, curtains, socks, leggings, wool, and cashmere.

Maintenance

Cleaning the Device

Regular cleaning ensures optimal performance and extends the lifespan of your lint remover.

1. Turn off the device and remove the batteries before cleaning.
2. Empty the Fuzz Container: The clear fuzz container should be emptied when it is approximately 70% full. Gently twist or slide off the clear container from the main body and discard the collected lint.
3. Clean Around the Blade: Carefully unscrew the metal shaving head cover. Gently lift the blade wheel straight up to expose the axle and the area beneath the blades. Use the provided cleaning brush or tweezers to remove any lint, string, or hair that may have wrapped around the axle or wedged into the blades.
4. Clean the Shaving Head: Use the cleaning brush to remove any remaining lint from the inside of the shaving head and the mesh screen.
5. Reassemble the blade wheel, shaving head cover, and fuzz container, ensuring all parts are securely in place.

Troubleshooting

Specifications

Warranty and Support

BoJia offers hassle-free lifetime customer service with quick response within a 24-hour timeframe. A 360-day full payback policy ensures a worry-free shopping experience. For any inquiries or support needs, please contact BoJia customer service through your purchase platform.