1. Introduction
Thank you for choosing the KHOMO GEAR Portable Projector Screen. This 100-inch screen with stand is designed for versatile use, offering both front and rear projection capabilities for indoor and outdoor environments. Its portable design ensures easy setup and transport, providing a wide 160-degree viewing angle for an optimal viewing experience.
2. What's Included
Verify that all components listed below are present in your package before proceeding with assembly.
This image shows all components included in the package: a carrying bag, the projection screen fabric, various frame poles, stand legs, ground stakes, and ropes.
- Projection Screen Fabric (100-inch, Reflective Oxford Nylon)
- Frame Poles (various lengths for top, bottom, and side sections)
- Stand Legs (2 units)
- Ground Stakes (4 units)
- Ropes (4 units)
- Carrying Bag
3. Setup Instructions
Follow these steps for quick and easy assembly. Assembly can typically be completed by one person in under 10 minutes.
- Unpack Components: Lay out all frame poles, stand legs, screen fabric, and accessories on a clean, flat surface.
- Assemble the Frame: Connect the frame poles by inserting the spring-loaded buttons into the corresponding holes. Start with the horizontal top and bottom poles, then attach the vertical side poles. Ensure all connections are secure.
- Attach Stand Legs: Connect the two stand legs to the bottom horizontal frame pole. Ensure they are firmly attached and provide a stable base.
- Install the Screen Fabric: Carefully stretch the screen fabric over the assembled frame. The fabric has elastic loops or attachments that hook onto the frame poles. Start by securing the four corners, then work your way around the perimeter, ensuring the screen is taut and wrinkle-free.
- Position the Screen: Place the assembled screen in your desired viewing location. For outdoor use, consider using the provided ground stakes and ropes to anchor the screen, especially in windy conditions, to enhance stability.
This video demonstrates the assembly process and key features of the KHOMO GEAR Portable Projector Screen.
A close-up view of the frame assembly, showing how the poles connect to form the screen's support structure.
The fully assembled 100-inch projector screen with stand, ready for use in an outdoor environment.
4. Operating Instructions
The KHOMO GEAR projector screen is designed for ease of use with various projection setups.
- Front Projection: Position your projector in front of the screen, facing the audience. This is the most common setup.
- Rear Projection: Position your projector behind the screen, projecting through the screen material towards the audience. This setup is ideal when you want to keep the projector out of sight or avoid shadows from people walking in front of the screen.
- Viewing Angle: The screen offers a wide 160-degree viewing angle, ensuring clear images and vivid colors from various positions.
A diagram demonstrating how to set up for both front and rear projection with the screen.
5. Maintenance
Proper care will extend the life and performance of your projector screen.
- Cleaning the Screen: Use a soft, damp cloth with mild soap and water to gently wipe the screen surface. Avoid abrasive cleaners or harsh chemicals, as these can damage the reflective oxford nylon material. Allow the screen to air dry completely before folding or storing.
- Frame Care: Wipe down the frame poles and stand legs with a damp cloth as needed. Ensure all parts are dry before storage to prevent rust or corrosion.
- Storage: When not in use, disassemble the screen and store all components in the provided carrying bag. Store in a cool, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
Here are solutions to common issues you might encounter:
| Problem | Possible Cause | Solution |
|---|---|---|
| Screen is not taut or has wrinkles. | Fabric not stretched evenly; frame not fully assembled. | Ensure all frame poles are securely connected. Re-attach the screen fabric, starting from the corners and stretching evenly around the frame. |
| Screen is unstable or tips over easily (outdoor use). | Insufficient anchoring; strong winds. | Always use the provided ground stakes and ropes to anchor the screen, especially in breezy conditions. Ensure stakes are fully inserted into the ground. |
| Image appears dim or washed out. | Ambient light interference; projector settings. | Reduce ambient light in the viewing area. Adjust your projector's brightness, contrast, and picture mode settings. Ensure the projector is aligned correctly. |
7. Specifications
Detailed specifications for your KHOMO GEAR Portable Projector Screen.
A diagram showing the physical dimensions of the 100-inch screen.
- Model Number: GER-1153
- Display Dimensions: 100 inches (diagonal)
- Product Dimensions (W x H): 90.55" x 51.18"
- Material: Reflective Oxford Nylon
- Mounting Type: Floor Mount
- Viewing Angle: 160 Degrees
- Item Weight: Approximately 11.57 Pounds
- Aspect Ratio: 16:9
8. Warranty Information
This KHOMO GEAR product comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation. Please retain your proof of purchase for warranty claims.
9. Support
For technical assistance, warranty claims, or any questions regarding your KHOMO GEAR Portable Projector Screen, please contact our customer support team. Refer to the contact information provided with your product packaging or visit the official KHOMO GEAR website for support details.