UNGER 977001
Contents
Unger Professional Universal Lightbulb Changing Kit Instruction Manual
Brand: UNGER | Model: 977001
Product Overview
The Unger Professional Universal Lightbulb Changing Kit is designed to simplify the task of changing lightbulbs in hard-to-reach areas without the need for ladders or chairs. This comprehensive kit includes an 11-foot telescopic pole and five versatile attachments, allowing for safe and efficient replacement of various bulb types, both indoors and outdoors.
Kit Components
The kit includes the following essential components:
- 11-foot Telescopic Pole: Provides extended reach for high ceilings and outdoor fixtures.
- Small Bulb Changer: For standard small incandescent or LED bulbs.
- Medium Bulb Changer: For standard medium incandescent or LED bulbs.
- Large Bulb Changer: For standard large incandescent or LED bulbs.
- Suction Cup Attachment: Designed for flat or recessed bulbs, ensuring a secure grip.
- Broken Bulb Changer: Safely removes broken bulbs from sockets by gripping the inside.
Included Attachments Overview

Figure 1: Overview of the five versatile attachments included in the kit.
Setup and Assembly
Follow these steps to assemble your Unger Professional Universal Lightbulb Changing Kit:
- Extend the Telescopic Pole: Twist the locking collars on the pole counter-clockwise to loosen, extend the pole to the desired length, then twist clockwise to secure.
- Select the Appropriate Attachment: Identify the correct bulb changer attachment based on the size and type of the bulb you intend to change.
- Attach the Changer Head: Align the chosen attachment with the threaded end of the telescopic pole. Thread the attachment clockwise onto the pole until it is securely fastened. Ensure a snug fit to prevent wobbling during use.

Figure 2: The main bulb changing tool with an attachment connected to the telescopic pole.
Operating Instructions
General Usage Tips:
- Always ensure the pole and attachment are securely connected before use.
- Maintain a stable stance and clear the area below the bulb to prevent accidents.
- Apply gentle, consistent pressure when engaging with the bulb.
- For outdoor use, ensure the area is dry and safe.
Changing Standard Bulbs (Small, Medium, Large Attachments):
- Select the appropriate size changer (small, medium, or large) that fits snugly around the bulb.
- Carefully extend the pole and position the changer over the bulb.
- Gently push the changer onto the bulb until it grips securely. The flexible fingers will conform to the bulb's shape.
- Rotate the pole counter-clockwise to unscrew the old bulb.
- Once unscrewed, carefully lower the pole with the bulb still gripped.
- Remove the old bulb from the changer.
- Insert the new bulb into the changer, ensuring it is held firmly.
- Raise the pole and align the new bulb with the socket.
- Rotate the pole clockwise to screw in the new bulb until it is snug. Do not overtighten.
- Gently pull the changer away from the bulb to release it.

Figure 3: Using the telescopic pole to change an outdoor lightbulb.
Using the Suction Cup Attachment (for Flat/Recessed Bulbs):
- Ensure the suction cup is clean and free of debris.
- Carefully extend the pole and position the suction cup directly onto the center of the flat or recessed bulb.
- Apply firm, even pressure to create a vacuum seal between the suction cup and the bulb.
- Rotate the pole counter-clockwise to unscrew the old bulb.
- Lower the pole with the bulb. To release the bulb, gently peel the edge of the suction cup away from the bulb.
- Attach the new bulb to the suction cup, ensuring a good seal.
- Raise the pole and align the new bulb with the socket.
- Rotate the pole clockwise to screw in the new bulb.
- Once the bulb is secure, gently break the suction seal to release the bulb.

Figure 4: The suction cup attachment for flat or recessed bulbs.
Using the Broken Bulb Changer:
Caution: Always wear protective eyewear and gloves when handling broken glass.
- Ensure the power to the light fixture is turned off at the circuit breaker.
- Carefully extend the pole and insert the broken bulb changer into the broken bulb's socket. The changer's teeth are designed to grip the inside of the broken base.
- Gently rotate the pole counter-clockwise to unscrew the broken bulb base.
- Once the base is removed, carefully lower the pole.
- Dispose of the broken glass safely.

Figure 5: The broken bulb changer attachment for safe removal of broken bulb bases.
Maintenance
To ensure the longevity and optimal performance of your Unger Professional Universal Lightbulb Changing Kit, follow these maintenance guidelines:
- Cleaning: After each use, wipe down the pole and attachments with a damp cloth to remove any dust or debris. For stubborn grime, a mild soap solution can be used. Ensure all parts are completely dry before storage.
- Storage: Store the kit in a clean, dry place away from direct sunlight and extreme temperatures. The attachments are designed to snap together for compact storage, reducing clutter.
- Inspection: Periodically inspect the pole for any signs of damage, such as cracks or bends. Check the attachments for wear on the gripping fingers or suction cup. Replace any damaged components immediately to ensure safe operation.
Troubleshooting
If you encounter issues while using your lightbulb changing kit, refer to the following common problems and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb changer not gripping the bulb securely. | Incorrect attachment size; insufficient pressure; dirty bulb/attachment. | Ensure you are using the correct size attachment for the bulb. Apply firm, even pressure. Clean the bulb and attachment surfaces. |
| Suction cup not adhering to flat bulb. | Suction cup or bulb surface is dirty/wet; insufficient pressure; bulb surface is not flat enough. | Clean and dry both the suction cup and the bulb surface. Apply strong, consistent pressure to create a seal. This attachment is best for truly flat surfaces. |
| Telescopic pole sections are slipping or not locking. | Locking collars are not tightened sufficiently. | Twist the locking collars firmly clockwise until the pole sections are secure. |
| Broken bulb base cannot be removed. | Base is too tightly seized; teeth not gripping properly. | Ensure power is off. Re-position the broken bulb changer to get a better grip on the inside of the base. Apply steady, firm counter-clockwise rotation. If extremely stuck, professional assistance may be required. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Name | 977001 |
| Brand | UNGER |
| Item Weight | 1.5 Pounds |
| Product Dimensions | 8"D x 49"W x 5"H |
| Base Material | Plastic |
| Included Components | 11’ Telescopic Pole, 5 Versatile Attachments |
| Recommended Uses | Indoor and Outdoor Lightbulb Changing |
Warranty Information
The Unger Professional Universal Lightbulb Changing Kit comes with a manufacturer's warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your product or visit the official Unger website.
Customer Support
For further assistance, technical support, or inquiries regarding your Unger Professional Universal Lightbulb Changing Kit, please contact Unger customer service. You can find contact information on the official Unger website or through your product's packaging.
Website: www.ungerglobal.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.