Introduction
Thank you for purchasing the Smart Torch, Model ST-1000. This manual provides essential information for the safe and efficient use of your new device. Please read this manual thoroughly before operating the Smart Torch and retain it for future reference.
The Smart Torch is designed to provide powerful illumination with smart features, including adjustable brightness, multiple light modes, and app connectivity for enhanced control.
Safety Information
Please observe the following safety precautions to prevent injury or damage to your Smart Torch:
- Do not look directly into the light beam. The intense light can cause temporary vision impairment or eye damage.
- Keep the device away from water and moisture. This product is not waterproof unless explicitly stated on the packaging.
- Do not disassemble, modify, or attempt to repair the Smart Torch. This will void the warranty and may cause damage or injury.
- Use only the specified charging cable and adapter. Incorrect charging equipment may damage the battery or cause fire.
- Keep out of reach of children. Small parts may pose a choking hazard.
- Avoid extreme temperatures. Do not expose the device to direct sunlight for prolonged periods or store it in very hot or cold environments.
- Dispose of the device and its battery responsibly according to local regulations.
Package Contents
Verify that all items are present in your package:
- Smart Torch (Model ST-1000)
- USB-C Charging Cable
- Wrist Lanyard
- User Manual (this document)
Product Overview
Familiarize yourself with the components of your Smart Torch:
- Lens: The primary light source.
- Power/Mode Button: Used to turn the torch on/off and cycle through light modes.
- Charging Port (USB-C): Located under a protective cover, used for charging the internal battery.
- Battery Indicator Lights: Small LEDs indicating battery charge level.
- Lanyard Attachment Point: For securing the wrist lanyard.
Note: No product images are available for display in this manual.
Setup
1. Initial Charging
Before first use, fully charge your Smart Torch:
- Open the protective cover of the USB-C charging port.
- Connect the provided USB-C cable to the torch and the other end to a USB power adapter (not included) or a computer USB port.
- The battery indicator lights will show charging progress. All lights will be solid when fully charged.
- Charging typically takes 3-4 hours.
2. App Installation (Optional)
For advanced features and control, download the "Smart Torch Connect" app:
- Scan the QR code on the product packaging or search for "Smart Torch Connect" in your device's app store (iOS/Android).
- Install the app and follow the on-screen instructions to create an account or log in.
3. Pairing with App (Optional)
To connect your Smart Torch to the app:
- Ensure Bluetooth is enabled on your smartphone.
- Turn on the Smart Torch.
- Open the "Smart Torch Connect" app. The app will automatically search for nearby devices.
- Select "ST-1000" from the list of found devices to pair.
- Once paired, you can control the torch via the app.
Operating Instructions
1. Basic Operation
- Turn On/Off: Press and hold the Power/Mode Button for 2 seconds.
- Change Brightness/Mode: While the torch is on, short press the Power/Mode Button to cycle through brightness levels (Low, Medium, High) and special modes (Strobe, SOS).
- Direct High Mode: Double-press the Power/Mode Button quickly from any state (on or off) to activate the highest brightness mode instantly. Double-press again to return to the previous state or turn off.
2. App Control (if paired)
When connected to the "Smart Torch Connect" app, you can:
- Adjust brightness with a slider for fine control.
- Select specific light modes (e.g., Reading, Camping, Emergency).
- Schedule turn on/off times.
- Monitor battery status.
- Customize button functions (advanced users).
Note: No official product videos are available for display in this manual.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the exterior of the torch. Do not use abrasive cleaners or solvents. For the lens, use a lens cleaning cloth.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the torch when the battery indicator shows low power. If storing for a long period, charge the battery to about 50% every 3-6 months.
- Storage: Store the Smart Torch in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Torch does not turn on. | Battery is depleted. | Charge the torch fully. |
| Torch does not turn on. | Device malfunction. | Contact customer support. |
| Cannot connect to app. | Bluetooth is off; torch is off; app issue. | Ensure Bluetooth is on, torch is on. Restart app/phone. Re-pair device. |
| Light output is dim. | Low battery; wrong mode selected. | Recharge the torch. Cycle through modes or adjust brightness via app. |
Specifications
- Model: ST-1000
- Light Source: High-efficiency LED
- Brightness: Up to 1200 Lumens (Max)
- Battery: Rechargeable Lithium-ion (e.g., 2600mAh)
- Charging Port: USB-C
- Connectivity: Bluetooth 5.0
- Dimensions: Approx. 120mm x 25mm (Length x Diameter)
- Weight: Approx. 150g
- Material: Aircraft-grade Aluminum Alloy
Warranty and Support
Warranty Information
The Smart Torch (Model ST-1000) comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Please retain your proof of purchase for warranty claims.
Customer Support
If you encounter any issues or have questions regarding your Smart Torch, please contact our customer support team:
- Email: support@smarttorch.com
- Phone: 1-800-555-SMART (Mon-Fri, 9 AM - 5 PM EST)
- Website: www.smarttorch.com/support
When contacting support, please have your product model (ST-1000) and purchase date ready.
