Introduction
Thank you for choosing the Soundmaster FUR100 Portable Radio. This versatile device combines a radio, alarm clock, and weather station, offering excellent sound quality and integrated speakers. This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure optimal performance.
- Versatile radio equipment for multiple uses.
- Unbeatable sound quality.
- Superior quality product.
Setup
1. Unpacking
Carefully remove all components from the packaging. Ensure you have the Soundmaster FUR100 unit, the power cable, and any external sensors (if included).
2. Power Connection
Connect the provided power cable to the DC input port on the back of the unit and then plug it into a standard electrical outlet. The unit will power on and the display will illuminate.
3. Initial Setup and External Sensor Placement
Upon first power-on, the device may automatically attempt to set the time via radio signal. Allow a few minutes for this process. If an external temperature sensor is included, place it outdoors in a shaded area, away from direct sunlight and moisture, to ensure accurate readings. The main unit will display both indoor and outdoor temperatures.

Image: The Soundmaster FUR100 main unit with its curved LED display showing the time, indoor temperature, and outdoor temperature. A small external sensor is visible in the background.
Operating Instructions
1. Basic Controls
The top panel of the FUR100 features several buttons for controlling various functions. Refer to the diagram in your quick start guide for specific button layouts. Common buttons include Power, Mode, Tune/Set, Volume, and Alarm.
2. Radio Tuning (FM)
- Press the Mode button to select FM radio mode.
- Use the Tune buttons (often labeled with arrows) to manually scan for stations or press and hold to auto-scan for the next available station.
- Adjust the volume using the Volume buttons.
3. Setting the Alarm
To set an alarm, press the Alarm button. Use the Tune/Set buttons to adjust the hour and minute. Press Alarm again to confirm. You can typically choose between a radio alarm or a buzzer alarm. The alarm volume often starts quietly and gradually increases.
4. Display Settings and Weather Information
The LED display shows time, indoor temperature, and outdoor temperature. Some models allow adjustment of display brightness. Press the Dimmer or Display button (if available) to cycle through brightness levels. The unit also provides weather forecast symbols based on atmospheric pressure changes, though these are indicative and may not always perfectly match current conditions.

Image: A close-up of the Soundmaster FUR100 display, clearly showing the time, outdoor and indoor temperatures, and weather forecast icons like sun and clouds. The external sensor is visible on the left.
Maintenance
Cleaning
To clean the unit, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Ensure the unit is unplugged before cleaning.
Care and Handling
Avoid exposing the unit to extreme temperatures, direct sunlight, or high humidity. Do not place it near heat sources or in areas with excessive dust. The unit is not waterproof.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Display off | Power cable not connected; Power outlet faulty. | Ensure power cable is securely connected. Try a different outlet. |
| Poor radio reception | Weak signal; Antenna not extended. | Extend the FM antenna fully. Reposition the unit for better reception. |
| Inaccurate outdoor temperature | External sensor placement; Interference. | Ensure the external sensor is placed in a shaded, dry area. Check battery in sensor if applicable. Reduce distance between sensor and main unit. |
| Display too bright at night | Brightness setting too high. | Press the Dimmer/Display button to adjust brightness to a lower setting. |
Specifications
- Brand: Soundmaster
- Model Number: FUR100
- Color: Multicolor
- Special Feature: Radio
- Tuning Technology: FM
- Style: Portable
- Power Source: Electrical Cable
- Supported Radio Bands: FM
- Water Resistance Level: Not waterproof
- Display Technology: LED
- Recommended Uses: Weather information, Night use
Warranty and Support
Soundmaster products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support or service inquiries, please contact your retailer or visit the official Soundmaster website for contact information.
Note: Information regarding spare parts availability and software updates is not available at this time.





