Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Baxton Studio Brooklyn King Size Platform Bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
The Baxton Studio Brooklyn King Size Platform Bed features a durable rubber wood frame with walnut finishing and a polyester fabric upholstered headboard with button-tufting and edge piping, designed for a timeless mid-century modern aesthetic.
Safety Information
- Always assemble the bed on a soft, clean surface to prevent damage to the product or flooring.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not use power tools for assembly as this may overtighten and damage components.
- Keep small parts away from children during assembly.
- This product is designed for indoor use only.
Setup and Assembly
Assembly of the Baxton Studio Brooklyn King Size Platform Bed is required. It is recommended that two adults perform the assembly to ensure safety and ease of construction.
Components Checklist
Before beginning, verify that all parts are present and undamaged. Refer to the packaging for a complete list of hardware.
- Headboard (1)
- Siderails (2)
- Footboard (1)
- Support Legs (4)
- Slats (Multiple)
- Hardware Pack (Bolts, Washers, Allen Key, etc.)
Assembly Steps
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
- Attach Legs to Headboard and Footboard: Secure the support legs to the designated points on the headboard and footboard using the provided hardware. Ensure they are firmly attached.
- Connect Siderails: Attach the siderails to the headboard and footboard using the appropriate bolts and washers. Do not fully tighten all bolts until the frame is completely assembled.
- Install Slats: Place the wooden slats across the siderails. Ensure they are evenly spaced and secured according to the instructions provided in your hardware pack. Some slats may require screwing into the siderails for added stability.
- Final Tightening: Once the entire frame is assembled and all components are correctly aligned, fully tighten all bolts and screws.
Operation and Use
Once assembled, your Baxton Studio Brooklyn King Size Platform Bed is ready for use. This platform bed is designed to support a King size mattress directly, eliminating the need for a box spring.
- Mattress Placement: Carefully place your King size mattress onto the assembled slat system. Ensure the mattress is centered and sits securely within the frame.
- Headboard Use: The upholstered headboard provides comfortable back support for sitting up in bed.
Care and Maintenance
Proper care will extend the life and appearance of your bed.
- Wood Frame: Wipe the walnut finished wood frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. Polish occasionally with a furniture polish suitable for wood finishes.
- Fabric Upholstery: For the polyester fabric headboard, vacuum regularly with an upholstery attachment to remove dust. For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner or use a fabric cleaner specifically designed for polyester, testing on an inconspicuous area first.
- Hardware: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading of the fabric and wood finish.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels unstable or wobbly. | Loose hardware connections. | Check and tighten all bolts and screws on the frame and legs. |
| Squeaking noises. | Loose connections or friction between components. | Re-tighten all hardware. Ensure slats are properly seated and not rubbing against the frame. |
| Slats are not staying in place. | Incorrect installation or missing fasteners. | Verify that all slats are correctly positioned and secured according to assembly instructions. Ensure any required screws for slats are installed. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Baxton Studio |
| Model Name | Brooklyn King Size Platform Bed |
| Size | King |
| Product Dimensions | 86.61"L x 81.89"W x 46.06"H |
| Color | Light Beige |
| Finish Type | Wood (Walnut Finishing) |
| Included Components | Headboard, Siderails, Footboard, Slats, Support Legs, Hardware |
| Compatible Mattress Size | King |
| Assembly Required | Yes |
| Item Weight | 141.5 pounds |
| Material | Polyester Fabric (100%), MDF, LVL, Rubber Wood, Foam |
| UPC | 842507105945 |
| ASIN | B07BG9RPN4 |
Warranty Information
Specific warranty details for the Baxton Studio Brooklyn King Size Platform Bed are not provided in this manual. For information regarding product warranty, please refer to the documentation included with your purchase or contact Baxton Studio directly. You may also inquire with the retailer from whom the product was purchased.
Customer Support
If you have any questions about the assembly, operation, or maintenance of your Baxton Studio Brooklyn King Size Platform Bed, please contact Baxton Studio customer service or the retailer where you purchased the product.
- Manufacturer: Baxton Studio
- Online Store: Visit the Baxton Studio Store on Amazon
- Retailer: Bison Commerce (if purchased via Amazon)
