1. Safety Information
Please read and understand these safety instructions before operating your MOOER Micro Preamp M009. Keep this manual for future reference.
- Power Supply: Use only a regulated 9V DC power adapter with a center-negative plug. Incorrect power supplies can damage the unit and void the warranty. The recommended current draw is 100mA.
- Environment: Do not expose the unit to water, moisture, rain, or extreme temperatures. Avoid operating in dusty or dirty environments.
- Handling: Avoid strong impacts or excessive pressure on the controls. Do not attempt to disassemble or modify the unit; this will void the warranty.
- Cleaning: Clean only with a dry, soft cloth. Do not use liquid cleaners.
2. Product Overview
The MOOER Micro Preamp M009 Blacknight is a compact digital preamp pedal designed to deliver high-gain amplifier tones. It features dual channels, a built-in cabinet simulator, and a versatile 3-band EQ, making it suitable for various musical styles and setups.
2.1 Features
- Digital recreation of a classic high-gain amplifier.
- Dual channels (Clean/Dirty) with independent gain and volume controls.
- Integrated cabinet simulator for direct recording or PA connection.
- 3-band EQ (Bass, Mid, Treble) for comprehensive tone shaping.
- Compact and durable metal casing.
2.2 Controls and Connections

Image 1: Top view of the MOOER Micro Preamp M009 Blacknight, showing the control knobs and footswitch.
- DC 9V: Power input jack for a 9V DC (center negative) power adapter.
- VOL (Volume): Adjusts the overall output volume of the preamp.
- TRE (Treble): Controls the high-frequency response of the tone.
- GAIN: Adjusts the amount of overdrive/distortion.
- MID (Middle): Controls the mid-range frequency response of the tone.
- BASS: Controls the low-frequency response of the tone.
- CH/CAB Button: Short press to switch between Clean and Dirty channels. Long press to toggle the cabinet simulator on/off.
- Input Jack: 1/4" mono jack for connecting your guitar.
- Output Jack: 1/4" mono jack for connecting to an amplifier, mixer, or audio interface.
- Footswitch: Engages/bypasses the preamp effect.

Image 2: Angled view of the MOOER Micro Preamp M009 Blacknight, showcasing its compact design and 'Blacknight' branding.
3. Setup
3.1 Power Supply
- Connect a regulated 9V DC, center-negative power adapter (not included) to the DC 9V input jack on the pedal.
- Ensure the power supply provides at least 100mA.
3.2 Connecting to Your Rig
- Connect your guitar to the Input Jack of the M009 using a standard 1/4" instrument cable.
- Connect the Output Jack of the M009 to the input of your amplifier, power amplifier, mixer, or audio interface using a standard 1/4" instrument cable.
- For optimal performance, place the M009 before any time-based effects (e.g., delay, reverb) in your signal chain.
4. Operating Instructions
4.1 Basic Operation
- Power On/Off: Once connected to power, press the footswitch to engage (LED on) or bypass (LED off) the preamp effect.
- Channel Switching: Short press the CH/CAB button to toggle between the Clean and Dirty channels. The LED color may change to indicate the active channel.
- Cabinet Simulator: Long press and hold the CH/CAB button for approximately 2 seconds to toggle the cabinet simulator on or off. This is particularly useful when connecting directly to a mixer or audio interface.
4.2 Tone Adjustment
Use the control knobs to shape your desired tone:
- GAIN: Adjust for the desired amount of distortion or overdrive. Lower settings provide cleaner tones, while higher settings yield more aggressive, saturated sounds.
- VOL: Set the overall output level of the pedal. Adjust to match the volume of your bypassed signal or to drive your amplifier.
- BASS, MID, TRE: These three knobs control the low, mid, and high frequencies, respectively. Experiment with these controls to fine-tune your sound for different guitars, amplifiers, and musical contexts.
5. Maintenance
- Keep the pedal clean by wiping it with a dry, soft cloth.
- Avoid exposing the unit to direct sunlight, high humidity, or extreme temperatures.
- Do not use abrasive cleaners or solvents.
- Ensure all cables are securely connected during use and disconnected when not in use to prevent accidental damage.
6. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| No sound when pedal is engaged. |
|
| Poor sound quality or unexpected noise. |
|
| Pedal does not switch channels or cabinet simulator. |
|
7. Specifications
| Feature | Detail |
|---|---|
| Model | M009 Blacknight |
| Brand | MOOER |
| Item Weight | 3.2 ounces (approx. 90.7 grams) |
| Package Dimensions | 4.2 x 2.4 x 1.9 inches (approx. 10.7 x 6.1 x 4.8 cm) |
| Compatible Devices | Guitar |
| Connector Type | 6.35mm Jack (1/4" mono) |
| Output Wattage | 100 Watts (referring to compatible amplifier power) |
| Power Source | Corded Electric (9V DC, center-negative, 100mA minimum) |
| Number of Bands | 3 (Bass, Mid, Treble EQ) |
8. Warranty and Support
MOOER products are designed for reliability and performance. This product comes with a limited warranty against defects in materials and workmanship under normal use. The specific terms and duration of the warranty may vary by region and retailer.
For detailed warranty information, product support, or service inquiries, please refer to the official MOOER website or contact your authorized MOOER dealer where the product was purchased.
Online Resources: Visit the official MOOER website for the latest product information, FAQs, and support contact details.