Product Overview
The Kingston Brass KS213MB Two Handle Wall Mount Kitchen Faucet features a durable brass and zinc alloy construction with a matte black finish. Its wall-mount design helps maximize counter space. The faucet includes a swivel spout and two cross handles for controlling hot and cold water flow, utilizing a drip-free ceramic disc cartridge.
Key Features
- Solid brass and zinc alloy construction for durability.
- Drip-free ceramic disc cartridge ensures reliable performance.
- Wall mount 2-hole installation for a clean counter space.
- Adjustable center from 3-1/2" to 8-1/2" for versatile installation.
- 1.8 GPM/6.8 LPM spout flow rate at 60 PSI.
- Corrosion-resistant finish for lasting appearance.
Figure 1: Front view of the Kingston Brass KS213MB Two Handle Wall Mount Kitchen Faucet in Matte Black.
Setup and Installation
Before beginning installation, ensure all necessary components are present and that water supply lines are turned off. This faucet is designed for a 2-hole wall-mount installation with an adjustable center from 3-1/2 inches to 8-1/2 inches. Professional installation is recommended.
- Prepare Wall Openings: Ensure two holes are drilled in the wall at the desired height, spaced between 3-1/2 inches and 8-1/2 inches apart to accommodate the faucet's adjustable center.
- Connect Water Lines: Attach the hot and cold water supply lines to the corresponding inlets on the faucet body. Use plumber's tape on threaded connections to prevent leaks.
- Mount Faucet Body: Secure the faucet body to the wall using the provided mounting hardware. Ensure the faucet is level and tightly secured to prevent movement.
- Install Spout: Attach the swivel spout to the central opening of the faucet body. Hand-tighten first, then use a wrench if necessary, being careful not to overtighten.
- Install Handles: Place the cross handles onto their respective valve stems. Secure them with the provided screws or fasteners.
- Test for Leaks: Slowly turn on the main water supply and check all connections for leaks. Operate both hot and cold handles to ensure proper water flow and temperature control.
Figure 2: Technical diagram showing dimensions and adjustable center for the KS213MB faucet.
Figure 3: Diagram illustrating key features and installation type of the Kingston Brass wall mount faucet.
Video 1: Official product video demonstrating the Kingston Brass Victorian Two Handle Wall Mount Faucet, highlighting its design and functionality.
Operating Instructions
The Kingston Brass KS213MB faucet is designed for simple and intuitive operation.
- Turning On/Off: Rotate the cross handles clockwise to turn off the water flow and counter-clockwise to turn on the water flow.
- Temperature Control: The left handle controls hot water, and the right handle controls cold water. Adjust the desired water temperature by mixing the flow from both handles.
- Spout Swivel: The faucet features a swivel spout, allowing you to direct the water flow across your sink area as needed. Gently pivot the spout to the desired position.
Figure 4: Close-up view of the 'Cold' cross handle, indicating water temperature control.
Figure 5: Close-up view of the faucet spout, showing the aerator for smooth water flow.
Maintenance
Proper care and maintenance will ensure the longevity and appearance of your Kingston Brass faucet.
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the matte black finish.
- Water Spots: To prevent water spots, wipe the faucet dry after each use.
- Aerator Maintenance: If water flow becomes restricted, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Handle Tightness: Periodically check the handles for tightness. If they become loose, gently tighten the retaining screws.
Troubleshooting
Refer to the following common issues and solutions before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed shut-off valve; debris in water lines. | Clean aerator (see Maintenance); ensure shut-off valves are fully open; flush water lines. |
| Leaking from Spout | Worn ceramic disc cartridge; loose aerator. | Replace ceramic disc cartridge; tighten aerator. |
| Leaking from Handles | Worn O-rings or seals; loose handle assembly. | Replace O-rings/seals; tighten handle retaining screws. |
| Water Temperature Issues | Incorrect hot/cold water supply connections; water heater issues. | Verify correct hot/cold connections; check water heater settings. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Kingston Brass |
| Model Number | KS213MB |
| Mounting Type | Wall Mount |
| Number of Handles | 2 (Cross Handles) |
| Finish Type | Matte Black |
| Material | Brass |
| Flow Rate | 1.8 Gallons Per Minute (GPM) / 6.8 Liters Per Minute (LPM) at 60 PSI |
| Spout Design | Low-arc swivel |
| Spout Height | 4.56 Inches |
| Spout Reach | 10.5 Inches |
| Adjustable Center | 3-1/2" to 8-1/2" |
| Valve Type | Ceramic Disc Cartridge |
| Special Feature | Corrosion Resistant |
Warranty and Support
This Kingston Brass faucet comes with a limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your purchase or visit the official Kingston Brass website.
If you require technical assistance, replacement parts, or have any questions not covered in this manual, please contact Kingston Brass customer support. Contact information can typically be found on the product packaging or the manufacturer's website.