Introduction
The SuperFish TopClear 18000 Kit is a comprehensive pressure pond filter system designed to maintain clear and healthy pond water. This 3-in-1 kit integrates mechanical filtration, biological purification, and an ultraviolet clarifier (UVC) to effectively combat algae and prevent fish diseases. It is suitable for ponds up to 18,000 liters and features an energy-efficient electronic pump.
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your TopClear 18000 Kit to ensure optimal performance and longevity.
Product Features
Integrated Filtration System
- Mechanical Filtration: Utilizes filter foams to remove physical debris and suspended particles from the water.
- Biological Purification: Incorporates bio-balls to provide a large surface area for beneficial bacteria, converting harmful ammonia and nitrites into less toxic nitrates.
- UVC Clarifier (18 Watt): An integrated UV sterilizer effectively controls green pond water by clumping algae cells, making them easier for the filter to remove. It also helps prevent fish diseases.
Advanced Functionality
- Energy-Saving Pump (29 Watt PondECO 6900): A highly efficient electronic pump with a capacity of 5300 liters per hour, ensuring maximum performance with very low power consumption.
- UV Indicator: An LED indicator provides visual confirmation that the UVC lamp is operational.
- Auto Clean Wash System: A convenient backwash system allows for simple filter cleaning by draining dirty water, reducing maintenance effort.
- Flow Indicator: Shows the current water flow rate, indicating when the filter requires cleaning.
- Flexible Placement: All connections are located on top of the lid, allowing the filter to be placed discreetly beside, under, or even below the water level.
Figure 1: SuperFish TopClear 18000 Kit packaging illustrating the main components and features. The image displays the pressure filter unit, the 18W UVC lamp, the 29W energy-saving pump, and diagrams explaining the flow indicator, auto clean wash system, and filter media.
Components Included in the Kit
The SuperFish TopClear 18000 Kit typically includes the following:
- SuperFish TopClear 18000 Pressure Filter Unit
- Integrated 18 Watt UVC Lamp
- SuperFish PondECO 6900 Electronic Pond Pump (29 Watt, 5300 L/H)
- Filter Foams (for mechanical filtration)
- Bio-Balls (for biological filtration)
- Necessary connectors and fittings
- Instruction Manual
Note: Hoses are not included in this kit. A 32mm hose is recommended for optimal performance.
Setup and Installation
Follow these steps for proper installation of your SuperFish TopClear 18000 Kit:
- Choose Location: Select a suitable location for the filter. Due to its top connections, the filter can be placed discreetly beside, under, or even below the water level. Ensure it is on a stable, level surface.
- Connect Pump: Connect the PondECO 6900 pump to the inlet of the filter unit using appropriate hose (32mm recommended, not included). Ensure all connections are secure to prevent leaks.
- Connect Outlet: Connect a hose from the filter's outlet back to your pond, ensuring the water returns efficiently.
- Connect Backwash Drain: If using the Auto Clean Wash system, connect a drain hose to the designated backwash outlet. This hose will direct dirty water away from the pond during cleaning.
- Submerge Pump: Place the PondECO 6900 pump in the deepest part of your pond, ensuring it is fully submerged and stable.
- Power Connection: Connect the power cables for both the filter (UVC) and the pump to a grounded, weather-protected outdoor power outlet. Ensure all electrical connections are safe and comply with local regulations.
- Initial Start-up: Once all connections are secure, switch on the power. Water should begin flowing through the filter and back into the pond. Check for any leaks.
It is recommended to consult a qualified electrician for electrical installations if you are unsure.
Operation
Once installed, the SuperFish TopClear 18000 operates continuously to maintain water quality. Here are key operational aspects:
- Continuous Operation: For optimal pond health, the filter system should run 24 hours a day, 7 days a week during the pond season.
- UV Indicator: Monitor the LED UV indicator on the filter lid. If the light is off, it indicates that the UVC lamp is not working and may need replacement or troubleshooting.
- Flow Indicator: The flow indicator provides a visual cue of the water flow rate. A reduced flow rate suggests that the filter media may be clogged and requires cleaning.
- Pond Clarity: Expect to see significant improvement in pond clarity within approximately two weeks of continuous operation.
Maintenance
Regular maintenance is crucial for the efficient operation and longevity of your TopClear 18000 Kit.
Filter Cleaning (Auto Clean Wash System)
The integrated Auto Clean Wash system simplifies filter cleaning:
- Power Off: Always switch off the pump and UVC unit before performing any maintenance.
- Engage Backwash: Follow the instructions on the filter unit to engage the backwash function. This typically involves turning a handle or lever to redirect water flow.
- Drain Dirty Water: Allow the dirty water to drain out through the backwash outlet until the water runs clearer. This process flushes out accumulated debris from the filter foams.
- Return to Filter Mode: Once cleaned, return the backwash system to its normal filtration mode.
- Power On: Restore power to the pump and UVC unit.
Frequency of cleaning depends on pond conditions and fish load. Monitor the flow indicator for signs of reduced flow.
UVC Lamp Replacement
The UVC lamp's effectiveness diminishes over time, even if it still lights up. It is recommended to replace the UVC lamp annually, ideally at the start of the pond season, to ensure optimal algae control and disease prevention.
- Power Off and Disconnect: Completely switch off and unplug the filter unit from the power supply.
- Access UVC Chamber: Carefully open the filter unit to access the UVC lamp chamber. Refer to the specific diagrams in your physical manual for precise access.
- Remove Old Lamp: Gently remove the old UVC lamp. Handle with care as it may be fragile.
- Install New Lamp: Insert a new 18 Watt UVC lamp (SuperFish original replacement recommended) into the chamber, ensuring it is seated correctly.
- Reassemble: Securely close the UVC chamber and reassemble the filter unit.
- Power On: Reconnect power and check the UV indicator to confirm the new lamp is working.
Always use genuine SuperFish replacement parts for best performance and safety. Avoid touching the glass of the new UVC lamp with bare hands, as oils can reduce its effectiveness.
Troubleshooting
This section addresses common issues you might encounter with your SuperFish TopClear 18000 Kit.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pond water remains green/cloudy |
|
|
| No water flow or reduced flow |
|
|
| UV indicator light is off |
|
|
| Water leaking from filter |
|
|
Specifications
| Attribute | Value |
|---|---|
| Product Model | SuperFish TopClear 18000 Kit |
| Manufacturer Model Number | part_B07BFHZ83W |
| Pond Capacity (Max) | 18,000 Liters |
| UVC Power | 18 Watt |
| Pump Model | SuperFish PondECO 6900 |
| Pump Power Consumption | 29 Watt |
| Pump Flow Rate | 5300 Liters/Hour |
| Product Weight | 15 Kilograms |
| Color | Black |
Warranty and Support
The SuperFish TopClear 18000 Kit comes with a 2-year warranty, and is TUV-GS approved, ensuring product quality and safety.
For technical support, replacement parts, or warranty claims, please contact your SuperFish retailer or visit the official SuperFish website. Ensure you have your proof of purchase and product model number (part_B07BFHZ83W) ready when contacting support.
Always refer to the official SuperFish documentation for the most up-to-date warranty terms and conditions.
