Introduction
The XPOWER FC-300 is a professional-grade air circulator utility fan designed for heavy-duty applications requiring significant air movement for drying, cooling, or ventilation. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your FC-300 unit.
Image: The XPOWER FC-300 Air Circulator Utility Fan, showcasing its blue and black housing with a sturdy stand.
Safety Information
Please read and understand all safety instructions before operating the XPOWER FC-300. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always connect the unit to a properly grounded electrical outlet.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Keep children and pets away from the unit during operation.
- Do not insert fingers or foreign objects into the grille or any openings.
- Disconnect power before servicing or cleaning the unit.
- This unit is ETL / CETL safety certified, indicating compliance with recognized safety standards.
Product Overview
The XPOWER FC-300 is designed for optimal air circulation and durability. Key components include:
- Durable Housing: Injection-molded for resilience.
- Control Panel: Features a 4-speed operating switch and a 3-hour timer.
- Rugged Rack/Stand: Allows for 360-degree rotational angle adjustment.
- Grab-N-Go Handle: For easy portability.
- Heavy-Duty Wrap-Around Cord Design: For convenient storage and transport.
Image: Front view of the XPOWER FC-300, highlighting the fan blades and protective grille.
Setup
- Unpacking: Carefully remove the FC-300 from its packaging. Inspect the unit for any signs of damage.
- Placement: Place the unit on a stable, level surface. Ensure there are no obstructions to the airflow intake or exhaust.
- Power Connection: Plug the 10-foot heavy-duty power cord into a standard, grounded electrical outlet.
- Adjusting Angle: The FC-300 features a rugged rack/stand that allows for a 360-degree rotational angle. Loosen the knobs on the side of the stand, adjust the fan to the desired angle, and then tighten the knobs securely.
Image: Side view of the FC-300 demonstrating its ability to rotate 360 degrees on its stand, indicated by arrows.
Operating Instructions
Control Panel
The control panel is located on the top of the unit and includes a speed selector and a timer knob.
Image: Close-up of the FC-300's control panel, showing the rotary switch for OFF and speeds 1-4, and the timer knob.
Power and Speed Control
- To turn the unit ON, rotate the speed selector knob from 'OFF' to your desired speed setting (1-4).
- Speed 1 provides the lowest airflow, while Speed 4 provides the maximum 2100 CFM airflow.
- To turn the unit OFF, rotate the speed selector knob back to 'OFF'.
Timer Function
The FC-300 is equipped with a 3-hour 'Set-N-Forget' timer. Rotate the timer knob to set the desired operating duration up to 3 hours. The unit will automatically shut off once the set time has elapsed.
Airflow Applications
The FC-300's advanced air fin guide technology and 360-degree directional airflow make it versatile for various applications:
- Focused Airflow: The unique grille design creates a focused airflow that can travel up to 170 feet, ideal for directing air to specific areas.
Image: Diagram showing the FC-300 generating a focused air stream that extends up to 170 feet.
- Whole Room Circulation: Position the fan to bounce air off walls to ensure air reaches every corner of a room, preventing stale or stagnant air.
Image: Diagram depicting how the FC-300 can be used to circulate air throughout a room by directing airflow to rebound off walls.
- Drying and Ventilation: For faster drying, position the fan to constantly recirculate air, creating a consistent stream of airflow. For ventilation, direct the airflow towards an open window or door.
Image: Diagram showing the FC-300 recirculating air to create a gentle and consistent airflow, which helps shorten drying times.
- Floor Drying: Point the fan downward to dry areas around the fan up to 85 feet in diameter.
Image: Diagram showing the FC-300 directed downwards to dry a circular area on the floor up to 85 feet in diameter.
Image: The FC-300 positioned on a tiled floor, demonstrating its compact size and utility in a typical setting.
Maintenance
Regular maintenance ensures optimal performance and longevity of your FC-300.
- Cleaning: Disconnect the unit from power before cleaning. Use a soft, damp cloth to wipe down the exterior housing. For the fan blades and grille, use a brush or vacuum cleaner to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.
- Storage: The FC-300 features a lightweight and compact injection molded housing that allows units to be stacked up to 5 high for easy storage. Utilize the wrap-around cord design to secure the power cord neatly before storing.
- Inspection: Periodically inspect the power cord and plug for any damage. If damage is found, discontinue use and contact customer support.
Troubleshooting
If you encounter issues with your FC-300, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power supply; Power cord not fully plugged in; Circuit breaker tripped | Check power outlet; Ensure cord is securely plugged in; Reset circuit breaker |
| Reduced airflow | Intake or exhaust blocked; Fan blades dirty | Clear obstructions; Clean fan blades and grille |
| Unusual noise during operation | Loose components; Debris inside unit | Turn off and unplug the unit. Carefully inspect for loose parts or debris and remove if safe to do so. If noise persists, contact customer support. |
If these steps do not resolve the issue, please contact XPOWER customer service for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Name | FC-300 |
| Air Flow Capacity | 2100 Cubic Feet Per Minute (CFM) |
| Power Source | Corded Electric |
| Wattage | 100W (1.5 Amps) |
| Voltage | 220 Volts |
| Number of Power Levels | 4 |
| Timer | 3-hour Set-N-Forget |
| Product Dimensions (D x W x H) | 18.6" x 19.2" x 9.4" |
| Item Weight | 13 Pounds |
| Cable Length | 10 Feet |
| Color | Black, Blue |
| Certifications | ETL / CETL Safety Certified |
Warranty and Support
Warranty
The XPOWER FC-300 comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, technical assistance, or warranty inquiries, please contact XPOWER's California-based customer service team. They are available to provide comprehensive support and ensure a satisfactory customer experience.
Contact information can typically be found on the official XPOWER website or on the product packaging.
