Introduction
The Notifier AMPS-24 is an Addressable Power Supply designed to provide reliable and regulated 120VAC power for compatible fire alarm control panels, such as the NFS-3030 and NFS2-3030. This unit ensures the stable operation of addressable devices within a fire detection system. This manual provides essential information for the proper installation, operation, and maintenance of the AMPS-24 unit.
Image Description: An overview of the Notifier AMPS-24 Addressable Power Supply, including the main circuit board, power supply module, the accompanying instruction manual, and a sealed bag of wiring harnesses.
Setup and Installation
Proper installation is crucial for the safe and effective operation of the AMPS-24. Always ensure power is disconnected before beginning any installation procedures.
Safety Precautions
- WARNING: Disconnect all sources of power to the control unit before servicing or installation.
- CAUTION: Hazardous voltages are present. Only qualified personnel should perform installation and maintenance.
- Refer to the specific documentation for the main fire alarm control panel (e.g., NFS-3030/NFS2-3030) for detailed wiring diagrams and compatibility information.
Image Description: A detailed view of the AMPS-24 unit, highlighting the warning labels regarding hazardous voltages and the necessity to disconnect power before servicing. UL and ULC listings are also visible.
Component Identification
The AMPS-24 unit consists of a main circuit board and a power supply module. Connections for input power, auxiliary power, and communication are clearly marked on the board.
Image Description: A top-down view of the AMPS-24 unit, clearly showing the green main circuit board and the metallic power supply module mounted above it. Various connectors and components are visible.
Wiring Connections
Use the provided wiring harness to connect the AMPS-24 to the fire alarm control panel and other necessary components. Ensure all connections are secure and follow local electrical codes and system diagrams.
Image Description: A clear image of a sealed plastic bag containing various colored wires and connectors, representing the wiring harness included with the AMPS-24 unit for system integration.
Initial Power-Up
After all connections are made and verified, apply 120VAC power to the unit. Observe any status indicators on the AMPS-24 and the main control panel to confirm proper operation. Consult the 'Intelligent Power Supply AMPS-24/E Manual' and the 'PK-PPS Power Supply Programming Utility' CD for detailed configuration steps.
Image Description: The physical instruction manual titled 'Intelligent Power Supply AMPS-24/E Manual' and a CD labeled 'PK-PPS Power Supply Programming Utility' for the Notifier AMPS-24.
Operating Instructions
The Notifier AMPS-24 operates as an integral part of a fire alarm system, providing regulated power to addressable devices and modules. Once properly installed and configured, its operation is largely automatic, managed by the connected fire alarm control panel.
System Integration
The AMPS-24 communicates with the main fire alarm control panel (e.g., NFS-3030/NFS2-3030) to report its status, including power availability and any fault conditions. The control panel monitors the power supply and initiates appropriate actions or alerts if issues arise.
Status Indicators
Refer to the specific documentation for the AMPS-24 and your fire alarm control panel for details on LED indicators or display messages that signify normal operation, fault conditions, or other statuses.
Maintenance
Regular maintenance ensures the longevity and reliable performance of the AMPS-24. All maintenance should be performed by qualified personnel.
- Visual Inspection: Periodically inspect the unit for any signs of physical damage, loose connections, or excessive dust accumulation.
- Cleaning: If necessary, gently clean the exterior of the unit with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation openings are clear of obstructions.
- System Testing: Follow the recommended testing procedures for your overall fire alarm system, which should include verifying the proper operation of all power supplies.
- Environmental Conditions: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature component failure.
Troubleshooting
If the AMPS-24 or the connected fire alarm system indicates a fault related to the power supply, consider the following troubleshooting steps. Always refer to the detailed system manuals for comprehensive diagnostics.
- No Power/Fault Indicator:
- Verify that the 120VAC input power is present and stable.
- Check all wiring connections for looseness or damage.
- Ensure the unit is properly seated and connected to the main control panel.
- System Communication Error:
- Confirm that the communication wiring between the AMPS-24 and the control panel is intact and correctly terminated.
- Consult the control panel's manual for specific communication troubleshooting procedures.
- Overload Condition:
- If the power supply indicates an overload, disconnect non-essential loads to identify the source of the excessive current draw.
- Ensure the total current draw from all connected devices does not exceed the AMPS-24's rated output.
If issues persist after basic troubleshooting, contact Notifier technical support or a certified fire alarm technician.
Specifications
| Feature | Specification |
|---|---|
| Manufacturer | NOTIFIER |
| Part Number | NAMPS24 |
| Model Name | AMPS-24 |
| Item Weight | 2 pounds |
| Input Voltage | 120 Volts (AC) |
| Output Wattage | 120 Watts |
| Wattage | 1.2E+2 |
| Cooling Method | Air |
| Power Supply Design | Non-Modular |
| Compatible Devices | Personal Computer (Note: This typically refers to the control panel's processing unit) |
| ASIN | B07B6CBDLK |
| UPC | 0020103112486 |
Warranty and Support
Notifier provides a dedicated customer service team to assist with any questions regarding their products and orders. For specific warranty terms and conditions, please refer to the documentation included with your product or contact Notifier directly.
Contacting Support
For technical assistance, troubleshooting guidance beyond this manual, or warranty inquiries, please reach out to Notifier's customer service. Contact information can typically be found on the manufacturer's official website or in the product packaging.
