1. Product Overview
The Plantronics RIG 400HS is a wired gaming headset designed for use with PlayStation 4 consoles. It features a lightweight design, comfortable over-ear cushions, and a detachable noise-canceling microphone for clear communication. The headset provides immersive audio for an enhanced gaming experience.

Image: Top view of the Plantronics RIG 400HS Camouflage Gaming Headset, showing the camouflage headband and earcups.
2. What's in the Box
- RIG 400HS Gaming Headset
- Detachable Microphone
- 3.5 mm Audio Cable
3. Setup
3.1 Connecting to PlayStation 4 Controller
- Locate the 3.5 mm audio port on your PlayStation 4 controller. This port is typically found at the bottom edge of the controller.
- Plug the 3.5 mm audio cable from the RIG 400HS headset firmly into the controller's audio port.
- Ensure the connection is secure to prevent audio interruptions.
3.2 Microphone Attachment
The microphone is detachable. To attach it, align the microphone's connector with the port on the left earcup of the headset and push it in until it clicks securely into place. To remove, gently pull the microphone straight out from the port.
4. Operating Instructions
4.1 Volume Control
The RIG 400HS features an in-line volume control on the audio cable. Rotate the wheel up or down to adjust the audio volume to your preferred level. You may also need to adjust the volume settings within your PlayStation 4 system menu.
4.2 Microphone Usage
To activate the microphone, ensure it is securely attached to the headset. The in-line control also includes a microphone mute switch. Slide the switch to the appropriate position to mute or unmute your microphone. For optimal voice clarity, position the microphone approximately one inch from your mouth.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the headset. Do not use liquid cleaners or aerosols.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Avoid sharp bends or excessive pulling on the audio cable to prevent damage.
6. Troubleshooting
- No Audio: Ensure the 3.5 mm cable is fully inserted into both the headset and the controller. Check the in-line volume control and your PlayStation 4's audio settings.
- Microphone Not Working: Verify the microphone is securely attached and not muted via the in-line switch or PlayStation 4 settings.
- Distorted Audio: Try adjusting the volume levels on both the headset and the PlayStation 4. Ensure no other audio devices are interfering.
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | RIG-400HS |
| Connectivity Technology | Wired (3.5 mm Jack) |
| Noise Control | Active Noise Cancellation |
| Ear Placement | Over Ear |
| Form Factor | Over Ear |
| Impedance | 32 Ohms |
| Material | Synthetic Material (Camouflage Design) |
| Item Weight | 14.4 ounces |
| Product Dimensions | 10 x 10 x 4 inches |
| Compatible Devices | Gaming Consoles (PlayStation 4) |
8. Warranty and Support
For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Plantronics website. If you encounter issues not covered in this manual, contact Plantronics customer support for assistance.





