Stauer Magnificat II Automatic Watch User Manual

Introduction

The Stauer Magnificat II Automatic Watch is a sophisticated timepiece designed for men, featuring a 27-jewel automatic movement. This watch combines classic aesthetics with practical functionality, including three interior dials displaying the day of the week, date, and a 24-hour sun/moon indicator. Crafted with a stainless steel case, gold-fused accents, and a genuine black leather band, it offers both elegance and reliability. This manual provides essential instructions for setting up, operating, maintaining, and troubleshooting your watch.

Front view of the Stauer Magnificat II Automatic Watch, showcasing its intricate dial and classic design.

Setup and Time Setting

Follow these steps to prepare your Stauer Magnificat II watch for use and set the correct time, day, and date.

1. Step 1: Remove Crown Tab. If a small plastic tab is present under the crown (the knob on the side of the watch), gently pull it out and discard it. This tab prevents the watch from running during shipping.
2. Step 2: Initial Winding. As an automatic watch, the Magnificat II is powered by your natural movement. However, for initial startup or if the watch has stopped, manually wind it by rotating the crown clockwise approximately 25-50 times while it is in position 0 (fully pushed in). This builds up a power reserve.
3. Step 3: Setting the Time. Pull the crown out to position 2 (the farthest out position). Rotate the crown to move the hour and minute hands. Observe the 24-hour sub-dial to ensure you set the correct AM or PM.
4. Step 4: Setting Day and Date. Push the crown in halfway to position 1. Rotate the crown in one direction to adjust the date and in the opposite direction to adjust the day of the week. Avoid setting the date or day between 9 PM and 3 AM, as this can interfere with the automatic date change mechanism.
5. Step 5: Start the Watch. Once the time, day, and date are set, push the crown fully back into position 0. The watch will begin to run.

Angled view of the watch, highlighting the crown for time and date adjustments.

Operating Instructions

Automatic Movement

The Stauer Magnificat II features a 27-jewel automatic movement, meaning it is powered by the natural motion of your wrist. Wearing the watch daily ensures it remains wound and accurate. If the watch is not worn for an extended period, it may stop. In such cases, manually wind it as described in the 'Initial Winding' step of the Setup section.

Explanation of the automatic winding feature, powered by kinetic energy.

Water Resistance

Your Stauer Magnificat II watch is water-resistant to 3 ATM (30 meters). This rating indicates that the watch is suitable for everyday use and can withstand splashes, rain, or brief immersion in water. However, it is not designed for swimming, showering, bathing, or diving. Avoid operating the crown or pushers when the watch is wet to prevent water intrusion.

Maintenance

Cleaning Your Watch

Regular cleaning helps maintain the appearance and longevity of your watch. Use a soft, lint-free cloth to wipe the watch case and crystal. For the genuine leather band, gently wipe it with a slightly damp cloth. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the watch's finish or the leather.

Storage

When not wearing your watch, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. For automatic watches, if you do not wear it daily, consider using a watch winder to keep the movement active and maintain accurate time without manual winding.

Troubleshooting

Watch Not Running or Stopping Frequently

• Insufficient Winding: Automatic watches require movement to stay wound. If the watch has stopped, manually wind it by rotating the crown clockwise 25-50 times while it is fully pushed in (position 0). Ensure you wear the watch regularly for sufficient kinetic energy.
• Crown Position: Verify that the crown is fully pushed into position 0. If it is pulled out, the watch will not operate.

Incorrect Day/Date Display

• AM/PM Setting: When setting the time, ensure the 24-hour sub-dial correctly indicates AM or PM. If the time is set incorrectly (e.g., PM instead of AM), the day/date may change at noon instead of midnight. Adjust the time by advancing the hands past 12 o'clock to correct the AM/PM cycle.
• Manual Adjustment: Follow the 'Setting Day and Date' instructions in the Setup section to manually correct the day and date displays.

Specifications

Rear view of the watch, revealing the 27-jewel automatic movement through the transparent case back.

Warranty and Support

For further assistance, product inquiries, or information regarding your warranty, please contact Stauer Customer Service using the details below:

• Toll Free: 888-333-2012
• Email: customerservice@stauer.com
• Website: www.stauer.com