1. Introduction
Thank you for purchasing the Bush Alarm Clock Radio. This device combines a digital clock with an FM/AM radio, offering dual alarm functions and a snooze feature. Please read this manual carefully to ensure proper use and to maximize the product's features.
2. Important Safety Information
- Do not expose the unit to rain or moisture to prevent fire or electric shock.
- Ensure the power adapter is easily accessible.
- Only use attachments/accessories specified by the manufacturer.
- Do not block any ventilation openings.
- Keep the unit away from direct sunlight, heat sources, and strong magnetic fields.
- Dispose of used batteries responsibly according to local regulations.
3. Product Overview
Familiarize yourself with the controls and display of your Bush Alarm Clock Radio.
Figure 1: Front and top view of the Bush Alarm Clock Radio, displaying the time and control buttons.
Control Buttons:
- POWER: Turns the unit on/off.
- MEM (Memory): Saves and recalls radio presets.
- SLEEP: Activates the sleep timer.
- SET: Enters setting mode for time and alarms.
- BAND: Switches between FM and AM radio bands.
- VOLUME +/-: Adjusts the sound volume.
- AL1 / AL2: Activates/deactivates Alarm 1 and Alarm 2.
- SNOOZE: Temporarily silences the alarm.
- TUNING +/-: Adjusts radio frequency.
- MIN (Minute): Adjusts minutes during time/alarm setting.
- HR (Hour): Adjusts hours during time/alarm setting.
4. Setup
4.1 Power Connection
- Plug the AC power adapter into the DC input jack on the back of the alarm clock.
- Plug the other end of the adapter into a standard wall outlet. The display will light up.
4.2 Battery Installation (Backup)
The alarm clock requires 2 x AAA batteries (not included) for backup power. These batteries maintain time and alarm settings during a power outage.
- Open the battery compartment cover on the bottom of the unit.
- Insert 2 AAA batteries, observing the correct polarity (+ and -) as marked inside the compartment.
- Close the battery compartment cover securely.
5. Operating Instructions
5.1 Setting the Time
- Press and hold the SET button until the hour digits begin to flash.
- Press the HR button repeatedly to adjust the hour. Observe the PM indicator if setting a 12-hour format.
- Press the SET button again. The minute digits will flash.
- Press the MIN button repeatedly to adjust the minutes.
- Press the SET button one more time to confirm and exit time setting mode.
5.2 Setting the Alarm (AL1 / AL2)
The unit features two independent alarms, AL1 and AL2.
- Press and hold the AL1 or AL2 button until the alarm hour digits begin to flash.
- Press the HR button to set the desired alarm hour.
- Press the AL1 or AL2 button again. The alarm minute digits will flash.
- Press the MIN button to set the desired alarm minutes.
- Press the AL1 or AL2 button once more to confirm the alarm time.
- To activate the alarm, press the AL1 or AL2 button briefly until the alarm indicator (bell icon) appears on the display. Press again to cycle through alarm sound options (radio/buzzer) or to deactivate.
5.3 Using the Radio
Figure 2: Display showing radio frequency.
- Press the POWER button to turn on the radio.
- Press the BAND button to switch between FM and AM bands.
- Use the TUNING +/- buttons to manually tune to a desired station. Press and hold for automatic scanning.
- Adjust the volume using the VOLUME +/- buttons.
Saving and Recalling Presets:
The unit supports 20 preset radio stations.
- Tune to the desired station.
- Press and hold the MEM button until a preset number flashes on the display.
- Use the TUNING +/- buttons to select the desired preset number (1-20).
- Press MEM again to save the station.
- To recall a preset, briefly press the MEM button, then use TUNING +/- to cycle through saved stations.
5.4 Snooze Function
When an alarm sounds, press the large SNOOZE button to temporarily silence the alarm. The alarm will sound again after approximately 9 minutes.
5.5 Sleep Function
The sleep timer allows you to fall asleep to the radio, which will automatically turn off after a set period.
- While the radio is on, press the SLEEP button repeatedly to cycle through available sleep times (e.g., 90, 60, 30, 15 minutes, OFF).
- The radio will play for the selected duration and then automatically turn off.
6. Maintenance
Cleaning
To clean the unit, wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as these may damage the finish. Ensure the unit is unplugged before cleaning.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power / Display off | Power adapter not connected; Power outage. | Check power adapter connection; Ensure power outlet is functional; Check backup batteries. |
| Alarm does not sound | Alarm not activated; Alarm volume too low; Incorrect alarm time. | Ensure alarm indicator is visible; Increase volume; Verify alarm time setting. |
| Poor radio reception | Weak signal; Antenna not extended. | Adjust the position of the unit; Extend the FM wire antenna fully; Try a different location. |
| Buttons unresponsive | Temporary system glitch. | Unplug the unit from power for a few minutes, then plug it back in. |
8. Specifications
- Model: Alarm clock
- Power Source: Mains operated
- Backup Battery: 2 x AAA (not included)
- Radio Tuner: FM/AM
- Preset Stations: 20
- Audio Output: 0.5 watts RMS
- Alarm Functions: Dual alarm, Wake to alarm/radio
- Features: Snooze function, Sleep timer
- Dimensions (H x W x D): 4.8 cm x 12.8 cm x 9.8 cm
- Weight: 0.28 Kilograms
9. Warranty & Support
This Bush Alarm Clock Radio is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your purchase or contact Bush Furniture customer support. For technical assistance or service inquiries, please visit the official Bush Furniture website or contact their customer service department.