1. Introduction
This document provides detailed instructions for the installation of the Kenmore 60140-0007201-00 Refrigerator Door Handle Set. This is a genuine Original Equipment Manufacturer (OEM) part designed for Kenmore refrigerators, ensuring proper fit and function. The set includes both the freezer and refrigerator door handles.
2. Safety Information
- Always wear work gloves to protect your hands from sharp edges or pinch points during installation.
- For safety, it is recommended to disconnect power to the refrigerator before beginning any installation or repair work.
- Refer to your refrigerator's owner's manual for specific safety precautions and instructions related to your appliance model.
3. Compatibility
This Kenmore refrigerator door handle set (part number 60140-0007201-00) is compatible with various Kenmore refrigerator models. It replaces part number 30105-0038201.
Compatible Models include:
- 11161202711
- 11161205711
- 11161202710
- 11161205710
- 11161215611
- 11171212611
- 11161212611
- 11161219611
- 11171215611
- 11161209710
- 11161209711
- 11171219611
- 11161219610
- 11171219610
Image 3.1: Always verify your refrigerator's model number to ensure compatibility with this handle set. Many parts may appear similar but are not interchangeable.
4. Package Contents
The Kenmore 60140-0007201-00 Refrigerator Door Handle Set typically includes the following components:
- Refrigerator Door Handle (1)
- Freezer Door Handle (1)
- Mounting Screws (typically 4-6 screws)
- Hex Key (for securing screws)
- Installation Instruction Sheet
Image 4.1: Overview of the Kenmore 60140-0007201-00 Refrigerator Door Handle Set and its included components.
5. Installation Instructions
Follow these steps to properly install the Kenmore 60140-0007201-00 Refrigerator Door Handle Set. Refer to the included instruction sheet for visual guidance.
Image 5.1: Detailed view of the handle mounting hardware and a portion of the installation instructions.
- Prepare the Area: Ensure the refrigerator door is clean and free of debris where the handle will be mounted. If replacing an old handle, carefully remove it and any remaining hardware.
- Install Standoff Screws: Locate the pre-drilled holes on the refrigerator door. Install the standoff screws (typically 2 per handle) into these holes. These screws provide the mounting points for the handles. Ensure they are securely tightened but do not overtighten.
- Remove Protective Film: If present, carefully remove any protective film from the new handles before proceeding.
- Position the Handle: Align the new handle over the installed standoff screws. The handle should slide smoothly onto the standoffs.
- Secure the Handle: Using the provided hex key, insert and tighten the set screws located on the underside or side of the handle. These screws will secure the handle firmly to the standoff screws. Tighten until snug, but avoid excessive force to prevent damage.
- Repeat for Second Handle: Follow the same steps for the second door handle (freezer or refrigerator, depending on which you are installing).
- Final Check: Gently pull on both handles to ensure they are securely attached and do not wobble.
Note: The orientation of the handles may vary depending on whether the refrigerator door swings left or right. Refer to the specific diagrams on the included instruction sheet for your model.
6. Specifications
| Feature | Detail |
|---|---|
| Part Number | 60140-0007201-00 |
| Brand | Kenmore |
| Manufacturer | Daewoo |
| Color | Black |
| Material | Metal (Stainless Steel Handle Material) |
| Style | Bar, Pull Handle |
| Number of Pieces | 2 (Set contains both handles) |
| Special Features | Easy to Install |
| Specific Use | Refrigerator Door |
7. Troubleshooting
If you encounter any issues during or after the installation of your Kenmore refrigerator door handle set, consider the following:
- Handle is Loose: Ensure all mounting screws and set screws are tightened securely. Avoid overtightening, which can strip threads.
- Handle Does Not Fit: Double-check your refrigerator's model number against the compatible models listed in this manual. If your model is not listed, the handle set may not be compatible.
- Missing Parts: Verify all components listed in the "Package Contents" section were received. Contact the seller or Kenmore customer support if any parts are missing.
For further assistance, please contact Kenmore customer support or a qualified appliance technician.
8. Support and Warranty
As a genuine Original Equipment Manufacturer (OEM) part, this Kenmore door handle set is designed for durability and precise fit. For specific warranty information regarding this part, please refer to your original refrigerator's warranty documentation or contact Kenmore customer service directly.
Kenmore Customer Support: For technical assistance, parts inquiries, or warranty claims, please visit the official Kenmore website or consult your refrigerator's owner's manual for contact details.
