AXIS P1448-LE Network Camera User Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your AXIS P1448-LE Network Camera. Please read this manual thoroughly before installing and operating the product. Keep this manual for future reference.

The AXIS P1448-LE is an advanced 8-megapixel outdoor-ready network camera designed for surveillance applications, offering high-resolution video and robust performance in various environmental conditions.

2. Product Overview

The AXIS P1448-LE is a bullet-style network camera featuring an 8 MP sensor, optimized for outdoor use. Key features include:

• 8 Megapixel Resolution: Provides clear and detailed video footage.
• Outdoor-Ready Design: IP67 rated for protection against dust and water.
• OptimizedIR: Built-in IR illumination for surveillance in complete darkness.
• Power over Ethernet (PoE): Simplifies installation by providing power and data over a single cable.
• Edge Storage: Supports microSD/microSDHC/microSDXC cards for local video storage.

Figure 2.1: The AXIS P1448-LE Network Camera, shown in its retail packaging. This image displays the camera's compact form factor and the branding on the box.

Figure 2.2: A side view of the AXIS P1448-LE Network Camera, highlighting its bullet design and mounting bracket. This perspective illustrates the camera's robust construction suitable for outdoor environments.

3. Safety Information

Always adhere to the following safety guidelines to prevent injury or damage to the product:

• Installation: Installation must be performed by qualified personnel in accordance with all local codes and regulations.
• Power Source: Use only the specified power source (PoE). Do not use power adapters not approved by Axis Communications.
• Environment: Do not expose the camera to extreme temperatures outside its operating range (-40°C to 60°C) or corrosive environments.
• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Modifications: Do not attempt to open or modify the camera. This will void the warranty and may cause damage.

4. Setup and Installation

4.1 Package Contents

Verify that all components are present in the package:

• AXIS P1448-LE Network Camera
• Installation Guide
• Drill Template
• Connector Kit
• Resistorx T20 Tool

4.2 Mounting the Camera

The AXIS P1448-LE is designed for ceiling or wall mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 1 kg / 2.2 lbs).

1. Select Location: Choose a suitable outdoor location, considering viewing angle and network cable access.
2. Drill Holes: Use the provided drill template to mark and drill mounting holes.
3. Secure Mount: Attach the camera's mounting bracket to the surface using appropriate screws.
4. Connect Cables: Connect the Ethernet cable to the camera's PoE port. Ensure a secure, weather-sealed connection.
5. Adjust Angle: Loosen the adjustment screws to position the camera for the desired viewing angle, then tighten securely.

4.3 Network Connection

The camera connects to your network via an Ethernet cable, powered by Power over Ethernet (PoE).

• Connect the Ethernet cable from a PoE-enabled switch or injector to the camera's network port.
• The camera will automatically power on and attempt to obtain an IP address via DHCP.
• Use Axis IP Utility or Axis Device Manager to discover the camera on your network and assign a static IP address if required.

5. Operating the Camera

5.1 Accessing the Web Interface

To configure and manage the camera, access its web interface:

1. Open a web browser (e.g., Chrome, Firefox).
2. Enter the camera's IP address in the address bar and press Enter.
3. Log in using the default credentials (username: root, password: pass). It is highly recommended to change the default password immediately after the first login for security reasons.

5.2 Basic Configuration

From the web interface, you can configure various settings:

• Video Stream: Adjust resolution, frame rate, and compression settings.
• Image Settings: Configure brightness, contrast, sharpness, and WDR (Wide Dynamic Range).
• Network Settings: Modify IP address, DNS, and port settings.
• Event Management: Set up motion detection, tamper alarms, and define actions (e.g., send email, record to SD card).
• Users: Create and manage user accounts with different access levels.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your camera.

• Lens Cleaning: Periodically clean the camera lens with a soft, lint-free cloth moistened with a mild cleaning solution. Avoid abrasive materials.
• Housing Inspection: Inspect the camera housing and mounting bracket for any signs of damage, corrosion, or loose connections.
• Firmware Updates: Regularly check the Axis Communications website for firmware updates. Updating firmware can improve performance, add features, and address security vulnerabilities.
• Cable Integrity: Ensure all cables are securely connected and free from damage, especially in outdoor installations where exposure to elements is constant.

7. Troubleshooting

This section provides solutions to common issues you might encounter.

If the problem persists, refer to the Axis Communications support website or contact technical support.

8. Specifications

Key technical specifications for the AXIS P1448-LE Network Camera:

• Model: P1448-LE (01055-001)
• Image Sensor: 8 MP CMOS
• Effective Video Resolution: 8 MP
• Lens: Optical Zoom 3.5x
• Viewing Angle: 109 Degrees
• Minimum Illumination: Night Color technology, Infrared (IR)
• Power: Power over Ethernet (PoE)
• Power Consumption: 7.1 watts
• Operating Temperature: -40°C to 60°C (-40°F to 140°F)
• IP Rating: IP67 (Dust and water resistant)
• Material: Aluminium, Polycarbonate (PC)
• Dimensions (L x W x H): 12.6 x 5.51 x 5.91 inches (approx. 32 x 14 x 15 cm)
• Weight: 2.2 pounds (approx. 1 kg)
• Storage: MicroSD/MicroSDHC/MicroSDXC slot
• Connectivity: Wired Ethernet

9. Warranty and Support

Axis Communications products typically come with a limited hardware warranty. For specific warranty terms and conditions, please refer to the official Axis Communications website or the warranty card included with your product.

For technical support, firmware downloads, and additional documentation, visit the official Axis Communications support portal:

www.axis.com/support

When contacting support, please have your product model (P1448-LE) and serial number ready.