1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Teka DSJ 650 60 cm Decorative Hood. Please read these instructions carefully before using the appliance and retain them for future reference.
2. Safety Information
Always adhere to the following safety guidelines to prevent injury or damage to the appliance.
- Electrical Safety: Ensure the appliance is properly grounded. Do not operate with a damaged power cord or plug. Disconnect power before any maintenance or cleaning.
- Ventilation: Ensure adequate ventilation in the room when the hood is used simultaneously with gas or other fuel-burning appliances.
- Flammable Materials: Do not flambé under the range hood. Avoid leaving frying pans unattended during use, as overheated oil can ignite.
- Cleaning: Regularly clean the hood and grease filters to prevent grease accumulation, which can be a fire hazard.
- Children: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Product Overview
The Teka DSJ 650 is a 60 cm wall-mounted decorative hood designed for efficient kitchen ventilation. It features a stainless steel finish and user-friendly controls.
3.1 Key Components
- Control Panel: Push-button controls for fan speeds and lighting.
- LED Lamps: Two integrated LED lamps provide illumination for your cooking area.
- Grease Filters: Mesh filters designed to capture grease particles.
- Motor: Double turbine motor for effective extraction.
4. Setup and Installation
The Teka DSJ 650 is a wall-mounted canopy hood. Professional installation is recommended to ensure proper functioning and safety.
4.1 Installation Dimensions
Refer to the diagram below for detailed installation dimensions. The hood is designed for a 60 cm width installation.
- Overall Dimensions (Height x Width x Depth): Approximately 67-100 cm x 60 cm x 48 cm (adjustable height).
- Minimum Height from Cooking Surface: Consult local building codes and appliance manufacturer recommendations for minimum clearance.
4.2 Mounting
The hood must be securely mounted to a sturdy wall structure. Ensure all mounting hardware is appropriate for your wall type and the weight of the appliance.
5. Operating Instructions
Your Teka DSJ 650 hood is equipped with push-button controls for easy operation.
5.1 Fan Operation
The hood features three fan speeds to suit various cooking needs.
- Power On/Off: Press the power button to turn the fan on or off.
- Speed Selection: Press the corresponding speed button (1, 2, or 3) to select the desired extraction level. Speed 1 is for light cooking, Speed 2 for moderate, and Speed 3 for heavy cooking or strong odors.
5.2 Lighting
The two LED lamps provide illumination for your cooking area.
- Light On/Off: Press the light button (often indicated by a bulb icon) to turn the LED lamps on or off.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your hood.
6.1 Cleaning the Grease Filters
The mesh grease filters should be cleaned regularly, typically every 2-4 weeks depending on usage, to maintain effective grease capture and prevent fire hazards.
- Removal: Carefully unlatch and remove the grease filters from the underside of the hood.
- Cleaning: Wash the filters by hand in hot soapy water or in a dishwasher. Ensure they are completely dry before reinstallation.
- Reinstallation: Insert the dry filters back into their positions, ensuring they are securely latched.
6.2 Cleaning the Hood Exterior
Clean the stainless steel exterior with a soft cloth and a non-abrasive cleaner specifically designed for stainless steel. Avoid harsh chemicals or abrasive pads.
6.3 LED Lamp Replacement
The hood uses LED lamps. If a lamp needs replacement, ensure the power is disconnected. Consult a qualified technician or refer to specific instructions for LED lamp replacement to avoid damage.
7. Troubleshooting
If you encounter issues with your hood, refer to the following common problems and solutions before contacting service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power supply Control panel malfunction | Check power connection and circuit breaker Contact customer support |
| Lights do not work | Faulty LED lamp No power supply | Replace LED lamp (if applicable) Check power connection |
| Poor extraction performance | Clogged grease filters Improper installation/ventilation | Clean or replace grease filters Ensure proper ducting and room ventilation |
| Excessive noise | Loose components Obstruction in fan/ducting | Check for loose parts and secure them Inspect fan and ducting for obstructions |
8. Specifications
| Feature | Specification |
|---|---|
| Model | DSJ 650 |
| Brand | Teka |
| Type | Decorative Wall-Mounted Hood |
| Material | Stainless Steel |
| Width | 60 cm |
| Controls | Push-button |
| Fan Speeds | 3 |
| Lighting | 2 LED Lamps |
| Motor Type | Double Turbine |
| Filter Type | Mesh |
| Noise Level | 58 dB |
| Voltage | 240 Volts |
| Product Weight | 1 Kilogram (Note: This weight may refer to packaging or a specific component, not the entire unit.) |
| Model Number | 8421152157282 |
9. Warranty and Support
For warranty information, technical support, or service requests, please refer to the warranty card included with your product or visit the official Teka website. Keep your purchase receipt as proof of purchase.
- Replacement Parts Availability: 2 Years (as per EU regulations).
Contact Information: Please refer to your regional Teka customer service details.
