Introduction
The Amazon Basics Stapler is a reliable and efficient tool designed for everyday stapling needs in offices, schools, and homes. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your stapler.
Image: The Amazon Basics Stapler shown alongside a stack of 1000 standard staples, highlighting its sleek black design and included accessories.
Setup
Loading Staples
- Open the Stapler: Gently press the release button or pull the top cover upwards until the stapler opens fully, revealing the staple channel.
- Insert Staples: Place a strip of standard 1/4 inch leg length staples into the channel with the pointed ends facing down. Ensure the strip is fully seated.
- Close the Stapler: Push the top cover back down until it clicks securely into place. The stapler is now ready for use.
Image: A hand demonstrating the process of loading a strip of staples into the open channel of the Amazon Basics stapler.
Operating Instructions
Basic Stapling
- Position Paper: Align the papers you wish to staple and insert them into the stapler's opening, ensuring they are flush against the back guide.
- Press Down: Firmly press down on the top of the stapler until the staple penetrates all sheets and clinches on the underside.
- Release: Lift the stapler to release the stapled documents.
Image: The Amazon Basics stapler positioned on a desk, ready to staple documents, demonstrating its ergonomic design.
Tacking Function
The stapler can be opened 180 degrees to function as a tacker for bulletin boards or other surfaces.
- Open Fully: Open the stapler completely until it lies flat, forming a straight line.
- Position: Hold the stapler with the open end against the material you wish to tack.
- Press: Press down to drive the staple through the material and into the surface.
Image: A hand holding the Amazon Basics stapler in its 180-degree open position, demonstrating its use for tacking a 'To Do' list onto a board.
Rotatable Anvil (Temporary/Permanent Stapling)
The stapler features a rotatable anvil at the base, allowing for two stapling models: Temporary Stapling and Permanent Stapling.
- Permanent Stapling: The default position, where staple legs are folded inward for a secure, permanent bind.
- Temporary Stapling: Rotate the anvil 180 degrees to fold staple legs outward, creating a temporary bind that is easier to remove.
Maintenance
To ensure the longevity and smooth operation of your Amazon Basics Stapler, follow these simple maintenance tips:
- Keep Clean: Regularly wipe the stapler with a dry, soft cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Clear Jams Promptly: If a staple jam occurs, open the stapler and carefully remove any bent or stuck staples. Do not force the mechanism.
- Store Properly: Store the stapler in a dry environment, away from extreme temperatures and humidity.
- Use Correct Staples: Always use standard 1/4 inch leg length staples to prevent jamming and ensure proper function.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stapler Jams Frequently | Overfilling staples, incorrect staple size, bent staples, too many sheets. | Ensure staples are correctly loaded and not overfilled. Use appropriate staple size (standard 1/4 inch). Clear any jammed staples by opening the stapler. Do not exceed 25-sheet capacity. |
| Staples Don't Penetrate Paper | Too many sheets, incorrect staple size, dull staples. | Check paper thickness against 25-sheet capacity. Ensure staples are standard 1/4 inch leg length. Replace old or damaged staples. |
| Stapler Skids on Desk | Non-slip base is dirty or damaged. | Verify the non-slip rubber base is clean and intact. Clean with a damp cloth if necessary. |
| Staples Bend or Malform | Incorrect staple size, low quality staples, stapling too many sheets. | Use only standard 1/4 inch staples. Ensure you are not exceeding the 25-sheet capacity. Try a different brand of staples if issues persist. |
Specifications
Image: Detailed dimensions of the Amazon Basics stapler and the included staples, providing precise measurements for reference.
| Feature | Detail |
|---|---|
| Brand | Amazon Basics |
| Model Number | DLSP-01C |
| Color | Black |
| Material | Rubber |
| Item Weight | 5.2 ounces |
| Product Dimensions | 6.18 x 2.28 x 1.46 inches |
| Staple Capacity | Holds up to 210 staples |
| Sheet Capacity | 25 sheets |
| Included Staples | 1000 staples (standard 1/4 inch leg length) |
| Special Features | 180° opening for tacking, Rotatable anvil for temporary/permanent stapling, Non-slip rubber base |
Warranty and Support
Your Amazon Basics Stapler is backed by a manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official warranty document.
Warranty Document: Download Warranty (PDF)
For any product support, technical assistance, or inquiries not covered in this manual, please visit the Amazon Basics support page or contact Amazon customer service directly.
Amazon Basics Store: Visit the Amazon Basics Store
