JJC Wireless Infrared Shutter Release Remote Control (Model IS-P1) Instruction Manual

Introduction

This manual provides detailed instructions for the operation and maintenance of your JJC Wireless Infrared Shutter Release Remote Control, Model IS-P1. This device is designed to provide remote shutter control for compatible Pentax cameras, enhancing your photography experience by minimizing camera shake and enabling self-portraits or group shots from a distance.

Key Features:

• Operating range extends up to approximately 65 feet (20 meters) in front of the camera.
• Supports single-shot and bulb modes for various shooting needs.
• Select camera models may support remote zoom (Tele/Wide) and Fn (Function) controls.
• Compact and portable design, easily stored for convenience.
• Infrared trigger requires a clear line of sight between the remote and the camera's IR receiver.

Setup

1. Battery Installation

The remote control requires one CR2 battery (included).

1. Locate the battery compartment on the back of the remote.
2. Open the battery compartment cover.
3. Insert the CR2 battery, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

The contents of the product package, including the remote control, user manual, warranty card, and the required CR2 battery.

2. Connecting to Your Camera

The JJC IS-P1 remote control operates via infrared (IR) signal. Ensure your camera is set to receive IR signals.

1. On your Pentax camera, navigate to the drive mode settings.
2. Select the "Remote Control" or "Self-Timer/Remote Control" option. Refer to your camera's specific manual for exact menu navigation.
3. Ensure there are no obstructions between the remote control and the camera's infrared receiver.

The remote control shown alongside a compatible Pentax camera, highlighting its compact form factor.

Operating Instructions

1. Single Shot Mode

To capture a single image, ensure your camera is in a single-shot drive mode. Point the remote control's infrared emitter towards the camera's IR receiver and press the main button on the remote.

2. Bulb Mode (Long Exposure)

For long exposure photography, set your camera to Bulb mode. Press and hold the main button on the remote to open the shutter. Release the button to close the shutter. This prevents camera shake from manually pressing the shutter button.

3. Continuous Shooting

If your camera supports continuous shooting via remote, set the camera's drive mode to continuous shooting. Press and hold the main button on the remote to capture a series of images.

4. Delay Shot

Activate the delay shot feature (e.g., 2-second delay) in your camera's drive mode settings. Press the main button on the remote, and the camera will trigger after the set delay.

5. Zoom and Fn Functions (Select Cameras Only)

For compatible Pentax cameras, the remote may offer remote zoom (Tele/Wide) and Fn (Function) control. Consult your camera's manual to confirm support for these features via infrared remote. Use the designated buttons on the remote for these functions.

This image visually explains the different operational modes of the remote, including single-shot, long exposure (bulb), and camera-specific zoom and function controls.

A detailed view of the remote's buttons, indicating their roles in controlling the camera's shutter, zoom, and other functions.

A demonstration of the remote control's wireless capability, enabling users to be part of group photos without needing to touch the camera.

Camera Compatibility

Compatible Pentax Camera Models:

This remote control is compatible with a wide range of Pentax cameras that support infrared remote control, including but not limited to:

• Pentax DSLR: K-70, K-30, K-5 II, K-5 IIs, K-3 II, K-1 II, K-S2, K-S1, 645D, 645Z, K500, K-7, K-5, K-1, K-3, K-01, K-X, K-R, K-50, K200, K10D, K100D, K100D Super, K110D, K200D
• Pentax Q Series: Q-S1, Q10, Q7, Q
• Pentax Optio Series: WG-20, WG-10, WG-5GPS, WG-4GPS, WG-3GPS, WG-2GPS, WG-1GPS, W90
• Pentax X Series: X90, X5

A comprehensive list detailing the Pentax DSLR, Q Series, Optio Series, and X Series cameras that are compatible with this remote control.

Maintenance

General Care:

• Keep the remote control dry. Do not expose it to moisture or extreme temperatures.
• Clean the remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• When not in use for extended periods, remove the battery to prevent leakage.
• Store in a cool, dry place away from direct sunlight.

Troubleshooting

Remote Not Responding:

• Check Battery: Ensure the CR2 battery is correctly installed and has sufficient power. Replace if necessary.
• Line of Sight: Verify there are no obstructions between the remote's emitter and the camera's IR receiver. The remote requires a clear line of sight.
• Camera Settings: Confirm your camera's drive mode is set to "Remote Control" or "Self-Timer/Remote Control."
• Distance: Ensure you are within the operational range of approximately 65 feet (20 meters).
• Ambient Light: Strong sunlight or other bright light sources can interfere with infrared signals. Try using the remote in a shaded area or indoors.

Intermittent Operation:

• This can often be caused by weak batteries or partial obstructions. Follow the steps above to check battery and line of sight.

Specifications

Product Specifications:

Warranty and Support

Warranty Information:

JJC products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official JJC website for specific warranty terms and conditions.

Customer Support:

For further assistance, technical support, or warranty claims, please contact JJC customer service through their official website or the retailer where the product was purchased.