1. Introduction
This manual provides essential information for the safe and effective use of your Barnett Whitetail Pro STR Crossbow. The Barnett Whitetail Pro STR is an ultra-compact compound crossbow designed for hunting, featuring a manageable profile and capable of shooting up to 400 feet per second. It comes equipped with a 4x32mm Multi-Reticle Scope, two 22" Headhunter Arrows, a Lightweight Quiver, a Rope Cocking Device, and Lubrication Wax.
Please read all instructions carefully before assembly and operation to ensure safety and optimal performance.
2. Safety Information
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- The crossbow is equipped with a Nock Sensor and Anti-Dry Fire Trigger System to prevent dry fires.
- Always use Finger Guards and observe Finger Safety Reminders.
- Ensure the string is waxed every 10 shots to maintain performance and safety.
- Always point the crossbow in a safe direction.
- Never shoot without an arrow properly seated.
- Keep fingers and thumb below the string track at all times.
3. What's in the Box
Your Barnett Whitetail Pro STR Crossbow package includes the following components:
- Barnett Whitetail Pro STR Crossbow (mostly assembled)
- 4x32mm Multi-Reticle Scope
- Two 22" Headhunter Arrows
- Lightweight Quiver
- Rope Cocking Device
- Lubrication Wax
Figure 1: Front view of the Barnett Whitetail Pro STR Crossbow.
4. Setup
The Barnett Whitetail Pro STR Crossbow ships mostly assembled, requiring minimal setup. The scope is pre-attached, and the riser needs to be secured to the stock using a single bolt assembly. This quick assembly process allows you to prepare your crossbow for use in less than a minute.
The crossbow is designed to allow for the integration of a Barnett Crank Cocking Device (sold separately) for easier cocking.
Figure 2: Side view of the Barnett Whitetail Pro STR Crossbow, illustrating its compact design.
Setup Overview Video
Video 1: An overview of the Barnett Whitetail Pro STR, demonstrating its features and initial setup steps.
5. Operating Instructions
5.1 Cocking the Crossbow
Use the provided rope cocking device to safely and evenly draw the string back until it locks into the trigger mechanism. Ensure the Nock Sensor and Anti-Dry Fire system engage correctly.
5.2 Loading an Arrow
Place a 22" Headhunter arrow onto the rail, ensuring the nock is properly seated against the string and the arrow is fully engaged with the retention spring. The Nock Sensor will confirm correct arrow placement.
Figure 3: Detail of the lightweight quiver holding Headhunter arrows, ready for loading.
5.3 Aiming and Firing
Utilize the 4x32mm Multi-Reticle Scope for precise aiming. The Triggertech trigger assembly provides a consistent and crisp 3.5-pound pull for enhanced accuracy. Always ensure your finger guards are in place and your fingers are clear of the string path.
Figure 4: Ergonomic stock and grip design for comfortable handling and stable shooting.
5.4 Decocking the Crossbow
If you need to decock the crossbow without firing, refer to the specific instructions provided in your crossbow's owner's manual for the safe decocking procedure. Improper decocking can be dangerous and may damage the crossbow.
Crossbow Decocking Demonstration (Generic)
Video 2: A demonstration of a crossbow decocking process. While this video features a different model (Killer Instinct Logix Crossbow), the general principles of safe decocking may apply. Always consult your specific Barnett Whitetail Pro STR manual for precise instructions.
6. Maintenance
- String Waxing: Apply lubrication wax to the crossbow string every 10 shots to prolong its life and maintain optimal performance.
- Inspection: Regularly inspect the crossbow for any signs of wear or damage, especially the string, cables, and limbs.
- Storage: Store the crossbow in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your crossbow, consider the following common troubleshooting steps:
- Inaccurate Shots:
- Check if the scope is securely mounted and properly sighted in.
- Ensure arrows are not damaged and are correctly nocked.
- Verify that the string is adequately waxed and in good condition.
- Dry Fire Prevention: The Nock Sensor and Anti-Dry Fire system are designed to prevent accidental dry fires. If the crossbow does not fire, ensure an arrow is properly seated and the safety is disengaged. Never attempt to force a shot.
- Cocking Difficulty: Ensure the rope cocking device is used correctly. If using an optional crank device, ensure it is properly installed and maintained.
For persistent issues, contact Barnett customer support or a certified archery technician.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | Whitetail Pro STR Crossbow, with 4x32mm Illuminated Scope, 2 Arrows, Lightweight Quiver |
| Brand | BARNETT |
| Color | Camouflage |
| Material | Aluminum |
| Item Weight | 6.9 Pounds |
| Hand Orientation | Right Hand |
| Archery Draw Weight | 187 Pounds |
| Archery Draw Length | 31 Inches |
| UPC | 042609000043 |
| Size | One Size |
| Item Dimensions (LxWxH) | 36.5 x 1 x 1 inches |
| Manufacturer | Barnett Archery |
| Part Number | BAR78004 |
| Style | Without Crank Device |
9. Warranty and Support
Your Barnett Whitetail Pro STR Crossbow comes with a Manufacturer's Warranty. For detailed information regarding warranty coverage, claims, or technical support, please refer to the warranty description included in your product packaging or visit the official Barnett Archery website.
You can also visit the BARNETT Store on Amazon for additional product information and support resources.
