Introduction
Thank you for choosing the Keter Allibert Salta Lounge Table. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your new lounge table. Please read these instructions carefully before use and retain them for future reference.
Figure 1: Keter Allibert Salta Lounge Table, showcasing its square design and graphitegray finish.
Safety Information
Always observe basic safety precautions when assembling and using this product to reduce the risk of injury or damage.
- Ensure all parts are present and undamaged before assembly. Do not attempt to assemble if any parts are missing or broken.
- Assemble the table on a soft, clean surface to prevent scratches.
- Do not overload the table. Refer to specifications for weight limits (if applicable, otherwise assume standard use).
- Keep small parts away from children during assembly to prevent choking hazards.
- Periodically check all connections and fasteners to ensure they remain tight and secure.
Setup and Assembly
The Keter Allibert Salta Lounge Table is designed for easy assembly. A screwdriver is recommended for assembly.
- Unpack all components and verify against the included parts list.
- Place the main table top (if separate) or base upside down on a soft, flat surface to protect the finish.
- Attach the legs or support structures according to the assembly instructions provided in the packaging. Ensure all connections are firm.
- Carefully turn the assembled table upright.
- Ensure the table is stable and level before placing any items on it.
Figure 2: The Salta Lounge Table integrated into an outdoor lounge area, demonstrating its intended use and scale.
Figure 3: Dimensional diagram of the Salta Lounge Table, indicating its length, width, and height for placement planning.
Operating Instructions
The Keter Allibert Salta Lounge Table is designed for outdoor use as a coffee or side table in a lounge setting. Its modern design complements various outdoor furniture styles.
- Place the table on a flat, stable surface to prevent tipping.
- Use the table to hold beverages, books, or decorative items within reach while relaxing outdoors.
- Avoid placing excessively hot items directly on the surface without protection.
Figure 4: A close-up view of the table's surface, highlighting the durable, weather-resistant plastic material with a woven texture.
Maintenance and Care
To ensure the longevity and appearance of your Keter Allibert Salta Lounge Table, follow these simple care instructions:
- Cleaning: Wipe with a damp cloth. For more stubborn dirt, a mild soap solution can be used. Rinse thoroughly with water and dry with a clean cloth.
- Material: The table is made from UV and weather-resistant, high-quality polypropylene (plastic). This material is designed to withstand outdoor elements, but prolonged exposure to extreme weather conditions may affect its lifespan.
- Storage: During prolonged periods of non-use or harsh winter conditions, it is recommended to store the table indoors or cover it with a protective cover to extend its life.
Troubleshooting
If you encounter any issues with your Salta Lounge Table, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table feels unstable or wobbly. | Uneven assembly or placement surface. | Ensure all screws and fasteners are tightened. Move the table to a flat, level surface. If necessary, use shims under the legs to stabilize. |
| Damage to the table surface or edges. | Impact during shipping or assembly; excessive force. | Inspect for visible cracks or breaks. For minor cosmetic damage, plastic repair kits may be available. For significant structural damage, contact customer support. |
| Discoloration or fading over time. | Prolonged exposure to direct sunlight or harsh chemicals. | While UV-resistant, extreme exposure can cause some fading. Use a protective cover when not in use, especially in strong sunlight. Avoid harsh cleaning agents. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Keter |
| Model Name | Salta |
| Model Number | 236104 |
| Product Dimensions (L x W x H) | 71.5 cm x 71.5 cm x 30 cm (28.15"D x 28.15"W x 11.81"H) |
| Color | Graphitegray |
| Material | High-quality polypropylene (plastic) |
| Item Weight | 5.8 Kilograms |
| Indoor/Outdoor Usage | Outdoor |
| Assembly Required | Yes (Easy to assemble) |
| Recommended Tools | Screw Driver |
Warranty Information
The Keter Allibert Salta Lounge Table comes with a Limited Warranty. For specific terms and conditions, including coverage details and duration, please refer to the warranty documentation included with your purchase or visit the official Keter website. This warranty typically covers manufacturing defects under normal use.
Customer Support
For further assistance, missing parts, or warranty claims, please contact Keter customer support. You can often find contact information on the Keter official website or through the retailer where you purchased the product.
Visit the official Keter store: Keter Store on Amazon
