NACON PCST-200MIC Streaming Microphone User Manual

1. Introduction

This user manual provides detailed instructions for the NACON PCST-200MIC Streaming Microphone. Please read this manual carefully before using the product to ensure proper operation and to maximize its performance. Keep this manual for future reference.

2. Package Contents

Verify that all items listed below are present in your product package:

• NACON PCST-200MIC Streaming Microphone
• Desktop Tripod Stand
• USB Cable (Type-A to Type-B)

3. Setup

Follow these steps to set up your NACON PCST-200MIC Streaming Microphone:

1. Attach the Microphone to the Stand: Securely screw the microphone onto the included desktop tripod stand. Ensure it is stable on a flat surface.
2. Connect to Computer: Insert the USB Type-B end of the provided cable into the microphone's USB port. Connect the USB Type-A end to an available USB port on your computer.
3. Operating System Recognition: Your computer (Windows Vista, 7, 8, or 10) should automatically detect and install the necessary drivers for the microphone. No additional software installation is typically required.
4. Initial Audio Settings: After connection, navigate to your computer's sound settings. Select the NACON PCST-200MIC as your default recording device. Adjust the input level as needed.

4. Operating Instructions

The NACON PCST-200MIC is designed for clear audio capture, particularly for streaming applications. Understand its controls for optimal performance:

1. Gain Control: Locate the 'GAIN' knob on the microphone body. Rotate this knob to adjust the microphone's input sensitivity. Increase gain for quieter sources or decrease it to prevent distortion from louder sources.
2. Headphone Volume Control: The 'HEADPHONES' knob controls the volume for the 3.5mm headphone output.
3. Zero-Latency Monitoring: Connect your headphones to the 3.5mm jack on the microphone. This allows for direct, real-time monitoring of your audio input without any delay, which is crucial for accurate recording and streaming.
4. Polar Pattern: The microphone utilizes a Hyper Cardioid polar pattern. This design primarily picks up sound from the front, reducing unwanted noise from the sides and rear. Position the microphone directly towards the sound source for best results.

5. Maintenance

Proper care ensures the longevity and performance of your microphone:

• Cleaning: Use a soft, dry cloth to wipe the microphone body. For the mesh grille, a soft brush can be used to gently remove dust. Avoid using liquid cleaners or abrasive materials.
• Storage: When not in use, store the microphone in a clean, dry environment, away from extreme temperatures and humidity.
• Handling: Avoid dropping the microphone or subjecting it to strong impacts, as this can damage internal components.

6. Troubleshooting

If you encounter issues with your microphone, refer to the following common problems and solutions:

• No Sound Output:
  • Ensure the USB cable is securely connected to both the microphone and the computer.
  • Verify that the NACON PCST-200MIC is selected as the default recording device in your computer's sound settings.
  • Check the microphone's gain knob; increase it if it is set too low.
  • Test with a different USB port on your computer.
• Sound is Distorted or Too Loud:
  • Decrease the microphone's gain knob.
  • Adjust the input level in your computer's sound settings.
  • Ensure you are not speaking too close to the microphone.
• Headphone Monitoring Not Working:
  • Ensure headphones are fully plugged into the 3.5mm jack on the microphone.
  • Increase the 'HEADPHONES' volume knob on the microphone.
• Microphone Not Recognized by Computer:
  • Restart your computer.
  • Try connecting to a different USB port.
  • Ensure your operating system (Windows Vista, 7, 8, or 10) is up to date.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official NACON website. Contact their customer service for assistance with product issues or inquiries.