1. Introduction
Thank you for choosing the Demeyere TRESOR Collection Matte White Wooden Toy Chest. This manual provides essential information for the safe assembly, operation, and maintenance of your new toy chest. Please read these instructions carefully before use and retain them for future reference.
This toy chest is designed to provide ample storage for children's toys and books, helping to keep their room tidy and organized. It features a safe design with a soft-closing lid and anti-finger pinch mechanism.
2. Safety Information
WARNING: Failure to follow these safety instructions could result in serious injury.
- Not suitable for children under 4 years old.
- Adult assembly required. Keep small parts and assembly hardware away from children before and during assembly.
- Ensure all fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not allow children to climb on or stand in the toy chest.
- The lid features an anti-finger pinch mechanism and soft-closing hinges to prevent sudden closure. However, always supervise children during use.
- Place the toy chest on a flat, stable surface.
- Keep away from open flames and direct heat sources.
- This product is intended for indoor use only.
3. Package Contents
Before beginning assembly, please check that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact Demeyere customer support for assistance.
The package includes:
- Demeyere TRESOR Collection Matte White Wooden Toy Chest components
- Assembly hardware (screws, dowels, hinges, gas struts)
- Assembly instructions manual
Image 3.1: Illustration of toy chest components and hardware. Please refer to the included assembly manual for a detailed list of parts.
4. Assembly Instructions
This toy chest requires self-assembly. Please follow the detailed step-by-step instructions provided in the separate assembly manual included in your package. Ensure you have the necessary tools (e.g., screwdriver) before starting.
- Unpack all components and verify against the parts list in the assembly manual.
- Assemble the main frame of the toy chest according to the diagrams.
- Attach the side panels and back panel.
- Install the lid hinges and soft-closing gas struts. Ensure these are correctly aligned and securely fastened for proper and safe operation.
- Attach the lid.
- Once assembled, check all screws and connections to ensure they are tight and secure.
For detailed visual instructions, please refer to the manufacturer's website or the assembly guide provided in the box.
Image 4.1: Detail of the soft-closing gas strut mechanism, crucial for safe lid operation.
5. Operating Instructions
5.1 Opening and Closing the Lid
The toy chest features a hinged lid with a soft-closing mechanism and an anti-finger pinch design for child safety.
- To open: Gently lift the lid. The gas struts will assist in holding the lid open.
- To close: Gently push the lid downwards. The soft-closing mechanism will ensure a slow and controlled descent, preventing sudden slams and protecting little fingers.
Image 5.1: The toy chest with its lid open, ready for storing or retrieving toys.
5.2 Storage Capacity
The spacious interior is ideal for storing various items such as plush toys, books, and other children's playthings. Do not overload the chest beyond its recommended weight capacity of 11 kg.
Image 5.2: The toy chest with its lid closed, providing a neat and tidy appearance.
6. Maintenance
6.1 Cleaning
To clean the toy chest, wipe surfaces with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish. Dry immediately with a clean cloth.
6.2 Inspection
Periodically inspect the toy chest for any signs of wear or damage. Check all screws, bolts, and connections to ensure they remain tight. Re-tighten if necessary. Pay particular attention to the lid hinges and gas struts to ensure they are functioning correctly and safely.
6.3 Moving the Toy Chest
When moving the toy chest, always lift it rather than dragging it to prevent damage to the legs or frame.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lid does not close softly or slams shut. | Gas struts or hinges are loose or damaged. | Check and tighten all screws on the hinges and gas struts. If damaged, contact customer support for replacement parts. |
| Toy chest feels wobbly or unstable. | Loose assembly screws. Uneven floor. | Ensure all assembly screws are securely tightened. Move the toy chest to a flat, even surface. |
| Scratches or marks on the surface. | Normal wear and tear. Impact from objects. | Minor scratches can sometimes be touched up with appropriate furniture repair kits. For significant damage, consider contacting a professional. |
8. Specifications
| Model Number: | 334549 |
| Brand: | Demeyere |
| Color: | Matte White |
| Materials: | Wood (MDF), Metal (hinges, gas struts) |
| Product Dimensions (L x W x H): | 69.5 cm x 29.5 cm x 54.3 cm |
| Product Weight: | 9.27 kg |
| Package Weight: | 10.1 kg |
| Assembly Required: | Yes, self-assembly |
| Recommended Age: | 4 years and above |
| Special Features: | Soft-closing lid, Anti-finger pinch mechanism, Water-based paint finish |
| Max. Weight Capacity: | 11 kg |
Image 8.1: Product dimensions for the Demeyere TRESOR Toy Chest.
9. Warranty and Support
The Demeyere TRESOR Collection Toy Chest comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
Demeyere is a PEFC (Programme for the Endorsement of Forest Certification) certified company since 2005, demonstrating our commitment to sustainable forest management.
For customer support, missing parts, or warranty inquiries, please visit the official Demeyere website or contact your retailer.
You can find more information and assembly instructions on the manufacturer's website: Demeyere Official Store
