Important Safety Information
Please read all instructions carefully before assembly and use of this conversion kit. Failure to follow these instructions could result in serious injury or death.
- Keep all small parts away from children during assembly.
- Ensure all hardware is securely tightened before use. Periodically check and re-tighten hardware as needed.
- Do not substitute parts. Use only the hardware provided by the manufacturer.
- This conversion kit is designed to convert a compatible crib into a full-size bed. It is not intended for use as a standalone bed frame without a compatible headboard and footboard.
- The converted bed supports up to 600 pounds when used with additional slats (sold separately). Ensure adequate mattress support is in place.
- Always place the bed on a level surface.
Product Overview
The CC KITS Full-Size Conversion Kit allows you to transform your compatible Namesake (formerly Million Dollar Baby) convertible crib into a full-size bed. This kit utilizes your existing crib's headboard and footboard, providing a seamless transition and extending the lifespan of your nursery furniture. The rails are constructed from 100% solid wood for durability.
Image: Crib converted to a full-size bed, illustrating the use of conversion rails, additional slats, and a mattress.
Compatibility
This conversion kit is designed for specific Namesake (formerly Million Dollar Baby) convertible crib models. Please verify your crib model number for correct compatibility.
Model #M4799/M5789 Compatibility:
- Ashbury (M8201)
- Brimsley Tambour (M26701)
- Etienne (M15701)
- Foothill (M3901)
- Liberty (M7141)
- Louis (M3401)
- Wembley (M10901)
If your crib model or finish is not listed, contact CC KITS for assistance in finding the correct conversion kit.
Image: Ashbury Crib conversion example.
Image: Etienne Crib conversion example.
Image: Foothill Crib conversion example.
Image: Louis Crib conversion example.
Model #M7689 Compatibility (for reference):
- Arcadia (M8901)
- Darlington (M15801)
- Durham Cribs purchased 2021 & later (M18301)
- Eloise (M24801)
- Emma Regency (M10701)
- Palermo (M17301)
- Rhodes (M20401)
- Strathmore (M5401)
- Sullivan (M9201)
- Tillsdale (M9601)
- Wakefield (M7701)
Package Contents
Verify that all components are present before beginning assembly.
For Kit #M5789:
- Two (2) Wooden Bed Rails
- Four (4) Slats
- Hardware Pack
- Instruction Manual
For Kit #M4799/M5789:
- Two (2) Wooden Bed Rails
- Hardware Pack
- Instruction Manual
Note: Additional slats or a box spring are recommended for optimal mattress support and are sold separately.
Setup and Installation
The conversion process typically takes 20-30 minutes. Ensure you have adequate space and the necessary tools (e.g., screwdriver, Allen wrench, if not included).
- Prepare the Crib: Disassemble the front and back panels of your convertible crib, retaining the headboard and footboard. Remove any existing mattress supports or spring frames.
- Attach Bed Rails: Align the conversion bed rails with the pre-drilled holes on your crib's headboard and footboard. Secure the rails using the provided hardware. Ensure all connections are tight and stable.
- Install Mattress Support: If your kit includes slats, evenly space and secure them across the bed rails. If your kit does not include slats or you require additional support, install a box spring or additional slats (sold separately).
- Place Mattress: Position your full-size mattress (and box spring, if used) onto the installed support system.
Image: Comparison of mattress height with slats versus a box spring.
Optional Add-ons:
- Safety Bed Rail Guard: For toddlers transitioning to a full-size bed, a safety rail guard (sold separately) can provide added security.
- Extra Slats: To increase the weight capacity and mattress support, additional slats can be purchased.
- Mattress: A full-size mattress is required for the converted bed.
Image: Optional add-ons including slats, safety rail, and mattress.
Usage
Once assembled, the full-size bed is ready for use. Ensure the mattress is properly seated on the support system. The bed is designed to accommodate a standard full-size mattress.
Maintenance and Care
To maintain the quality and appearance of your bed rails:
- Wipe surfaces with a damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Periodically check all hardware connections and tighten if necessary to ensure stability.
- Protect the wood from extreme temperature changes and direct sunlight to prevent warping or fading.
Image: Non-toxic product seal.
Troubleshooting
- Bed feels unstable: Ensure all hardware is fully tightened. Verify that the bed rails are correctly seated in the headboard and footboard slots. Check if the bed is on a level surface.
- Mattress sags: This kit supports up to 600 lbs with additional slats. If sagging occurs, consider adding more slats or using a box spring for enhanced support.
- Parts missing: Review the 'Package Contents' section. If parts are missing, contact CC KITS customer support for assistance.
- Rails do not fit: Double-check your crib's model number against the compatibility list. If your crib is not listed, the kit may not be compatible. Contact CC KITS for guidance.
Specifications
| Brand | CC KITS |
| Model Number | M5789/M4799 |
| Material | Solid Wood |
| Color | Manor Grey/Slate |
| Product Dimensions | 75"W x 5"H |
| Item Weight | 13.62 pounds |
| Maximum Weight Recommendation | 600 Pounds (with additional slats) |
| Adjustable Length | Yes |
Image: Solid wood construction detail.
Warranty and Support
This product is covered by a lifetime warranty, ensuring long-lasting durability and peace of mind.
For any questions, missing parts, or assistance with compatibility, please contact CC KITS customer support. Refer to the packaging or the manufacturer's website for contact details.
