SodaStream Source Sparkling Water Maker Model 1019501016 Instruction Manual

Introduction

The SodaStream Source Sparkling Water Maker, designed by Yves Béhar, offers a sleek and refined way to create sparkling water. This appliance features an LED indicator display to help users measure and adjust carbonation levels to their preference. This manual provides essential information for the safe and effective use of your SodaStream Source.

Important Safety Information

Please read all safety instructions carefully before using your SodaStream Source Sparkling Water Maker.

• Use only water in the carbonating bottle before carbonation.
• Do not carbonate anything other than plain water.
• Keep the appliance out of reach of children.
• Ensure the carbonating bottle is securely attached before operating.
• Do not remove the carbonating bottle during carbonation.
• Only use genuine SodaStream CO2 carbonators and carbonating bottles.

Package Contents

Your SodaStream Source Sparkling Water Maker Starter Kit includes:

• 1 x SodaStream Source Sparkling Water Maker
• 1 x 1-liter BPA-free reusable Source carbonating bottle
• CO2 carbonator (sold separately, not included in this ASIN)

Setup

Follow these steps to set up your SodaStream Source:

1. Remove the back cover of the SodaStream Source by gently pulling it away from the main unit.
2. Insert the CO2 carbonator into the back compartment. Screw it in firmly until it is hand-tight.
3. Replace the back cover, ensuring it snaps securely into place.

Operating Instructions

Creating sparkling water with your SodaStream Source is simple:

1. Fill the 1-liter carbonating bottle with cold tap water up to the fill line.
2. Insert the carbonating bottle into the machine using the snap-lock technology. Push the bottle up and back until it locks into place.
3. Press the carbonating button on top of the machine in short, firm bursts (approximately 1 second each). The LED indicator display will show the level of carbonation. For light fizz, press 1-2 times. For medium fizz, press 3-4 times. For strong fizz, press 5+ times.
4. Once desired carbonation is reached, gently pull the bottle forward to release it from the machine.
5. Add your favorite flavorings (optional) and enjoy your fresh sparkling water.

Maintenance

To ensure the longevity and optimal performance of your SodaStream Source:

• Cleaning: Wipe the exterior of the machine with a damp cloth. Do not immerse the machine in water.
• Carbonating Bottles: Wash reusable carbonating bottles with lukewarm water and mild dish soap, or in a dishwasher if specified as dishwasher-safe. Do not use hot water above 120°F (49°C).
• CO2 Carbonator: Replace the CO2 carbonator when it is empty. Empty carbonators can often be exchanged for a discount at authorized retailers.

Troubleshooting

If you encounter issues with your SodaStream Source, try these common solutions:

• No Carbonation: Ensure the CO2 carbonator is correctly installed and not empty. Make sure the carbonating bottle is filled with water to the line and securely locked in place.
• Leaking Water: Check that the carbonating bottle is properly inserted and sealed. Ensure the water level does not exceed the fill line.
• Weak Fizz: Press the carbonating button for longer or more times to achieve a stronger fizz. Ensure the water is cold, as cold water carbonates better.

Specifications

Warranty and Support

For warranty information, product support, or to purchase replacement parts and CO2 carbonators, please visit the official SodaStream website or contact their customer service. Keep your proof of purchase for warranty claims.