Teknetics TEK-Point Waterproof Metal Detector Pinpointer Probe User Manual

1. Introduction

The Teknetics TEK-Point Pinpointer is a high-performance tool designed for precise target localization in various environments. This device utilizes advanced pulse induction technology to detect metal objects in mineralized soils, saltwater, and other challenging terrains. Its fully waterproof construction allows for submersion, ensuring durability in diverse outdoor conditions. This manual provides essential information for the proper setup, operation, and maintenance of your TEK-Point Pinpointer.

2. Safety Information

• Always handle the device with care to prevent damage.
• Ensure the battery compartment is securely sealed before exposing the device to water.
• Do not attempt to open or modify the device beyond battery replacement, as this may void the warranty and cause damage.
• Keep the device away from strong magnetic fields, which can interfere with its operation.
• Dispose of batteries responsibly according to local regulations.

3. Package Contents

Verify that all items are present in your package:

• Teknetics TEK-Point Pinpointer Probe
• Belt Holster
• User Manual (this document)
• Two AA Batteries (may be included or sold separately)

4. Product Features

• Advanced Pulse Induction Technology: Provides exceptional detection capabilities in mineralized soils, saltwater, and challenging terrains.
• Rugged Waterproof Design: Fully submersible up to 6 feet (1.8 meters), suitable for underwater treasure hunting and use in harsh conditions.
• Customizable Sensitivity Levels: Features three adjustable sensitivity settings for precise targeting of various object sizes.
• 360-Degree Detection: Identifies metal targets from all sides of the probe, enhancing efficiency and reducing excavation time.
• Exceptional Battery Life: Operates for up to 20 hours on two AA batteries, ideal for extended use.
• Molded Rubber Grip: Provides a non-slip and comfortable hold.

5. Setup

5.1 Battery Installation

1. Locate the battery cap at the rear of the pinpointer.
2. Unscrew the battery cap by turning it counter-clockwise.
3. Insert two AA batteries into the compartment, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Replace the battery cap and screw it clockwise until it is hand-tight to ensure a waterproof seal. Do not overtighten.

Image: Rear view of the Teknetics TEK-Point Pinpointer, illustrating the battery cap location.

5.2 Attaching the Belt Holster

The included belt holster allows for convenient carrying of your TEK-Point Pinpointer. Slide your belt through the loop on the back of the holster. Insert the pinpointer into the holster with the detection tip facing downwards.

Image: The Teknetics TEK-Point Pinpointer secured within its protective belt holster.

6. Operating Instructions

6.1 Power On/Off

• To Power On: Press and hold the power button located on the side of the device until you hear a short beep and/or feel a vibration.
• To Power Off: Press and hold the power button again until the device emits a longer beep and/or vibration, indicating it has shut down.

Image: The Teknetics TEK-Point Pinpointer, highlighting the power button and overall design.

6.2 Sensitivity Adjustment

The TEK-Point Pinpointer offers three adjustable sensitivity levels to optimize detection for various target sizes and ground conditions.

1. With the device powered on, quickly press and release the power button to cycle through the sensitivity settings.
2. Each press will change the sensitivity level, indicated by a specific number of beeps and/or vibrations:
   • One beep/vibration: Low Sensitivity
   • Two beeps/vibrations: Medium Sensitivity
   • Three beeps/vibrations: High Sensitivity
3. Select the appropriate sensitivity based on your detection needs. Higher sensitivity is suitable for smaller targets or less mineralized ground, while lower sensitivity helps reduce false signals in highly mineralized areas.

6.3 Target Detection and Pinpointing

Once powered on and sensitivity is set, sweep the tip of the pinpointer over the area where a target is suspected. The device will emit an audible alert and/or vibrate with increasing intensity as it approaches a metal object. The 360-degree detection field allows for efficient scanning from all angles.

Image: A hand holding the Teknetics TEK-Point Pinpointer, demonstrating its waterproof capability by being partially submerged in water.

6.4 Waterproof Use

The TEK-Point Pinpointer is designed to be fully submersible up to 6 feet (1.8 meters). Ensure the battery cap is securely tightened before any underwater use. After use in saltwater or dirty conditions, rinse the device with fresh water.

7. Maintenance

7.1 Cleaning

• After each use, especially in wet or dirty environments, wipe down the pinpointer with a damp cloth.
• For saltwater exposure, rinse thoroughly with fresh water to prevent corrosion.
• Do not use abrasive cleaners or solvents, as these can damage the device's finish or internal components.

7.2 Storage

• Store the pinpointer in a cool, dry place when not in use.
• If storing for an extended period (more than a few weeks), remove the batteries to prevent leakage and potential damage to the device.

7.3 Battery Replacement

When the device's performance diminishes or it fails to power on, it is time to replace the batteries. Follow the battery installation steps in Section 5.1.

8. Troubleshooting

9. Specifications

10. Warranty and Support

The Teknetics TEK-Point Pinpointer is manufactured by First Texas Products. For warranty information, technical support, or service inquiries, please refer to the official Teknetics website or contact their customer service department. Keep your proof of purchase for warranty claims.

You can visit the official Teknetics store for more information: Teknetics Store