Introduction
This manual provides essential information for the proper installation, use, and maintenance of the Hitachi 372535 Bracket (A) C10Fshc. This component is a genuine Hitachi replacement part, designed to ensure compatibility and performance with specified Hitachi power tools. Please read this manual thoroughly before proceeding with installation or use.
Product Overview
The Hitachi 372535 Bracket (A) is a critical replacement component for the C10Fshc model. It is manufactured to Hitachi's high standards, ensuring durability and precise fit. As Hitachi Power Tools has transitioned to Metabo HPT, this part maintains the same quality and design.
- Genuine Hitachi (now Metabo HPT) replacement part.
- Designed for specific compatibility with the C10Fshc model.
- Ensures proper function and structural integrity of the power tool.
Installation and Setup
Safety First: Always disconnect the power tool from its power source before attempting any installation or replacement. Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
- Identify the Original Part: Locate the existing bracket on your C10Fshc power tool that requires replacement.
- Remove Old Bracket: Carefully remove any fasteners (screws, bolts, etc.) securing the old bracket. Note their positions and types for reassembly.
- Inspect Area: Clean the area where the new bracket will be installed, ensuring no debris or obstructions.
- Position New Bracket: Align the Hitachi 372535 Bracket (A) into its correct position.
- Secure New Bracket: Reinstall the fasteners, tightening them securely but without over-tightening, which could damage the bracket or tool housing.
- Functionality Check: After installation, manually check the movement or stability of the component the bracket supports to ensure proper function before reconnecting power.
Maintenance
As a replacement part, the 372535 Bracket (A) requires minimal maintenance.
- Regular Inspection: Periodically inspect the bracket for any signs of wear, damage, or loosening of fasteners.
- Cleaning: Keep the bracket and surrounding area clean from dust and debris to prevent interference with moving parts (if applicable).
- Storage: Store any spare brackets in a dry, clean environment away from extreme temperatures.
Troubleshooting
If you encounter issues after installing the 372535 Bracket (A), consider the following:
- Loose Fit: Ensure all fasteners are properly tightened. Refer to the power tool's main instruction manual for specific torque specifications if available.
- Incorrect Alignment: Verify that the bracket is correctly oriented and aligned with its mating components.
- Persistent Issue: If the problem persists, it may indicate an issue with another component of the power tool or incorrect part identification. Consult a qualified service technician or refer to the complete service manual for your C10Fshc tool.
Specifications
| Feature | Detail |
|---|---|
| Part Number | 372535 |
| Item Model Number | 372535 |
| Brand | Hitachi (Metabo HPT) |
| Included Components | Hitachi 372535 BRACKET (A)C10FSHC |
| Item Weight | 1 pounds |
| Product Dimensions | 1 x 1 x 1 inches |
| Item Package Quantity | 1 |
| Measurement System | Metric |
| Batteries Required | No |
| Manufacturer | Koki Holdings America, Ltd |
| Date First Available | February 13, 2018 |
Warranty and Support
For information regarding warranty coverage or technical support for your Hitachi (Metabo HPT) power tool or genuine replacement parts, please refer to the official Hitachi or Metabo HPT website or contact their customer service directly. Always use genuine replacement parts to maintain warranty validity and ensure optimal performance.
