Armor All Protectant, Glass and Cleaning Wipes

Armor All Car Wipes Multi-Pack Instruction Manual

Model: Protectant, Glass and Cleaning Wipes

Product Overview

The Armor All Car Wipes Multi-Pack provides a comprehensive solution for maintaining the interior and exterior glass surfaces of your vehicle. This kit includes three distinct types of wipes: Protectant Wipes, Cleaning Wipes, and Glass Wipes, each designed for specific car care needs.

Key features include:

  • Protectant Wipes: Clean, shine, and protect interior surfaces from harmful UV rays and oxidation, preventing cracking, fading, and premature aging.
  • Cleaning Wipes: Lift away dirt and debris from various automotive surfaces like dashboards, vinyl, fabric, carpet, consoles, and leather, without causing damage or leaving greasy residue.
  • Glass Wipes: Effectively remove filmy residue, road grime, bugs, and fingerprints from glass surfaces, leaving a crystal clear, streak-free shine. Safe for tinted windows.
Armor All Car Wipes Multi-Pack including Protectant, Cleaning, and Glass Wipes

Image: The Armor All Car Wipes Multi-Pack, featuring canisters of Protectant, Cleaning, and Glass wipes, designed to clean and protect your vehicle's surfaces.

Setup

The Armor All Car Wipes are ready for immediate use upon opening. No assembly or complex setup is required.

  1. Locate the desired canister (Protectant, Cleaning, or Glass) for your specific task.
  2. Open the flip-top lid on the canister.
  3. Pull a single wipe from the center of the roll through the dispenser opening.
  4. Close the flip-top lid firmly after each use to maintain moisture and prevent the wipes from drying out.

Operating Instructions

Follow these instructions for optimal results with each type of wipe:

1. Armor All Cleaning Wipes

Person using Armor All Cleaning Wipes on a car's interior door panel

Image: A hand wiping down a car's interior door panel with an Armor All Cleaning Wipe, demonstrating its use on auto surfaces.

  • Use on vehicle dashboards, vinyl, fabric, carpet, consoles, and leather.
  • Wipe surfaces to lift away dirt and debris.
  • No rinsing required.
  • Do not use on glass or painted surfaces.
Before and after comparison of a dirty car cupholder cleaned with Armor All Cleaning Wipes

Image: A side-by-side comparison showing a dirty car cupholder before cleaning and the same cupholder looking spotless after using Armor All Cleaning Wipes.

2. Armor All Original Protectant Wipes

Person using Armor All Protectant Wipes on a car's dashboard

Image: A hand applying an Armor All Protectant Wipe to a car's dashboard, highlighting its use for interior vinyl, rubber, and plastics.

  • Apply to interior surfaces such as vinyl, rubber, and plastic.
  • Wipe evenly over the surface.
  • Allow to penetrate for a few minutes, then wipe off excess with a clean cloth if desired.
  • Helps protect against UV rays, cracking, fading, and premature aging.
  • Leaves a non-greasy finish.

3. Armor All Glass Wipes

Person using Armor All Glass Wipes on a car's windshield

Image: A hand cleaning a car's windshield with an Armor All Glass Wipe, emphasizing its ability to provide crystal-clear, streak-free glass.

  • Use on interior and exterior glass surfaces, including tinted windows.
  • Wipe until clean and streak-free.
  • Removes filmy residue, road grime, bugs, and fingerprints.
  • Ammonia-free formula.

Video: An official product video from Armor All demonstrating the use and benefits of the Wipes Multipack, including Glass, Cleaning, and Protectant wipes for various car surfaces.

Maintenance

To ensure the longevity and effectiveness of your Armor All Car Wipes:

  • Always close the flip-top lid securely after each use to prevent the wipes from drying out.
  • Store canisters in a cool, dry place away from direct sunlight and extreme temperatures.
  • Do not store in areas where temperatures may exceed 100°F (38°C) or fall below 32°F (0°C).

Troubleshooting

ProblemPossible CauseSolution
Wipes are dry.Lid not securely closed; prolonged exposure to air.Ensure lid is tightly sealed after each use. Store in a cool, dry place. If severely dried, replacement may be necessary.
Glass Wipes leave streaks.Excess product or insufficient wiping.Wipe thoroughly until the surface is dry and clear. For best results, follow with a clean, dry microfiber cloth.
Protectant Wipes leave a greasy residue.Excess product applied.Wipe off any excess product with a clean, dry cloth after application.

Specifications

  • Brand: Armor All
  • Model: Protectant, Glass and Cleaning Wipes
  • Item Model Number: 18782
  • Item Weight: 1.65 pounds
  • Product Dimensions: 18.1 x 10.6 x 9.1 inches
  • Country of Origin: USA
  • Scent: Fresh
  • Sheet Count: 90 wipes total (30 per canister)
  • Package Information: Canister
  • Item Form: Wipes
  • First Available Date: July 27, 2015

Warranty and Support

For information regarding product warranty or customer support, please refer to the manufacturer's official website or contact Armor All customer service directly. You can also visit the Armor All Store on Amazon for additional product information and resources.

Return Policy: This product is eligible for a refund/replacement within 30 days if purchased from Amazon.

© 2025 Armor All. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.