1. Introduction
This instruction manual provides essential information for the safe and effective use of your LKPower AC Adapter, Model 180209014. This power supply is specifically designed to meet the power requirements of Avision AVA5 Plus, BS-1005S, and BS-0801S flatbed scanners, enabling operation or battery charging from standard electrical outlets.
The adapter converts AC power into the DC power required by your device. It features over-voltage and over-heat protection to ensure safe operation. This unit has been tested to confirm compatibility and reliable performance with the specified Avision scanner models.
2. Safety Information
- Ensure the adapter is used with compatible devices only. Refer to the specifications section for details.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not attempt to open or modify the adapter. This may void the warranty and pose safety risks.
- Unplug the adapter from the power outlet when not in use for extended periods.
- Keep out of reach of children.
3. Setup
Follow these steps to properly set up your LKPower AC Adapter:
- Inspect the Adapter: Before use, visually inspect the AC adapter and its cable for any signs of damage. Do not use if damaged.
- Connect to Device: Locate the power input port on your Avision flatbed scanner (e.g., AVA5 Plus, BS-1005S, BS-0801S). Insert the barrel connector of the LKPower AC adapter firmly into this port.
- Connect to Power Outlet: Plug the AC adapter into a standard wall electrical outlet (AC 100-240V, 50/60Hz). Ensure the outlet is easily accessible.
The scanner should now receive power or begin charging its battery, if applicable.
Image illustrating the LKPower AC adapter plugged into a wall outlet, demonstrating its compact design and how it appears in a typical usage scenario.
4. Operating Instructions
Once the LKPower AC Adapter is properly connected to both the scanner and a power outlet, your Avision scanner is ready for operation. The adapter provides continuous power, allowing you to use your scanner without interruption.
- Powering the Scanner: The adapter supplies the necessary power for the scanner to function. Turn on your scanner using its dedicated power button.
- Charging (if applicable): If your scanner model has a rechargeable battery, the adapter will also facilitate charging while connected.
- Disconnection: To disconnect, first turn off your scanner. Then, unplug the adapter from the wall outlet before disconnecting the barrel connector from the scanner.
5. Maintenance
Proper maintenance ensures the longevity and reliable performance of your AC adapter.
- Cleaning: Use a soft, dry cloth to clean the adapter. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Cable Care: Do not bend, twist, or pull the cable excessively. Ensure the cable is not pinched or placed under heavy objects.
6. Troubleshooting
If you encounter issues with your LKPower AC Adapter, refer to the following common problems and solutions:
- Scanner Not Powering On:
- Ensure the adapter is securely plugged into both the wall outlet and the scanner.
- Verify the wall outlet is functional by testing it with another device.
- Check the adapter cable and connector for any visible damage.
- Adapter Feels Warm:
- It is normal for the adapter to feel slightly warm during operation. If it becomes excessively hot, disconnect it immediately and contact support.
- Ensure the adapter is in a well-ventilated area and not covered.
- Intermittent Power:
- Check for loose connections at both the wall outlet and the scanner's power port.
- Ensure the cable is not damaged or frayed.
If these steps do not resolve the issue, please contact LKPower customer support for further assistance.
7. Specifications
Detailed technical specifications for the LKPower AC Adapter, Model 180209014:
Image displaying the product label on the LKPower AC adapter, indicating input specifications (AC 100-240V 50/60Hz) and safety certifications. The cable length is approximately 76 inches.
| Feature | Description |
|---|---|
| Model Number | 180209014 |
| Input Voltage | AC 100-240V |
| Frequency Range | 50/60Hz |
| Connector Type | Barrel Connector |
| Compatible Devices | Avision AVA5 Plus, BS-1005S, BS-0801S Flatbed Scanners |
| Power Source | Corded Electric |
| Special Features | Over Voltage Protection, Over Heat Protection, Travel-friendly design |
| Mounting Type | Wall Mount |
| Cable Length | Approximately 76 inches |
Image showing the dimensions of the LKPower AC adapter, measuring approximately 3.1 inches in length, 2.1 inches in width, and 1.2 inches in thickness.
8. Warranty and Support
LKPower products are manufactured to high-quality standards. For any warranty claims, technical support, or inquiries regarding your AC adapter, please contact the retailer or LKPower customer service directly. Please have your product model number (180209014) and purchase information available when contacting support.
For the most up-to-date support information, please visit the official LKPower website or refer to your purchase documentation.