1. Introduction
This manual provides essential information for the proper use and maintenance of your USARMT HTR-D10 Remote Control. This remote is designed as a direct replacement for various Haier TV models, offering immediate functionality without complex setup.
The HTR-D10 remote control is compatible with a wide range of Haier TV models, including but not limited to: HL19K1, HL19R1, HLC19R1, HLC19R1A, HLC19K1, HLC19K1A, HLC19K1C, HLC19KW1, HLC19KW1A, HLC19KW2, HLC19KW2A, HLC19K2A, HLC19SL2A, HLC22XSLW2, HLC22R1, HL22F1, HLC22KW2, HL22K1, HLC22K1, HL22R1, HLC22KW1, HLC22K1A, HLC22K2A, HLC22R1A, HLC22XSL2A, HLC24XK2A, HLC24XSL2A, HLC26R1A, HLC26R1B, HLC26R1, HLC32R1, HLC32K2A, HLC32R1A.
2. Setup and Battery Installation
The HTR-D10 remote control comes pre-programmed and requires no additional setup or programming. Simply install the batteries, and it will be ready for use with your compatible Haier TV.
2.1. Battery Requirements
- Two (2) AAA batteries are required.
- Ensure to use new, high-quality alkaline batteries for optimal performance and longevity.
2.2. Installing Batteries
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or in the direction indicated by an arrow to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Figure 1: Rear view of the HTR-D10 remote control, highlighting the battery compartment cover and the model number "HTR-D10" embossed at the top.
3. Operating Instructions
Once batteries are installed, the remote is ready to operate your compatible Haier TV. Point the remote directly at the TV's infrared sensor.
Figure 2: Front view of the HTR-D10 remote control, displaying all buttons and their labels, including power, number pad, volume, channel, navigation, and function buttons.
3.1. Button Functions Overview
| Button | Function |
|---|---|
| Power (Red Button) | Turns the TV on or off. |
| Number Pad (0-9) | Direct channel selection. |
| Input | Selects video input sources (HDMI, AV, Component, etc.). |
| Mute | Mutes or unmutes the TV audio. |
| Vol +/- | Adjusts the volume level up or down. |
| CH +/- | Changes the TV channel up or down. |
| Menu | Accesses the TV's main menu. |
| Navigation Arrows (Up, Down, Left, Right) | Navigates through menu options. |
| Enter | Confirms selections in menus. |
| Exit | Exits the current menu or on-screen display. |
| Guide | Displays the electronic program guide (if available). |
| CCD | Activates Closed Captioning. |
| MTS/SAP | Selects Multi-channel Television Sound/Secondary Audio Program. |
| CH.LIST | Displays the channel list. |
| Picture | Accesses picture settings. |
| Audio | Accesses audio settings. |
| ARC | Activates Audio Return Channel (if supported by TV). |
| Favorite | Accesses favorite channels. |
| Recall | Switches between the current and previously viewed channel. |
| Sleep | Sets the sleep timer. |
| Display | Displays current channel information or status. |
| Open/Close | Typically for DVD/Blu-ray player tray control (if integrated or connected). |
| Play/Pause | Controls media playback (play/pause). |
| Stop | Stops media playback. |
| Repeat | Repeats current track/chapter (if applicable). |
| REV (Reverse) | Rewinds media playback. |
| FWD (Forward) | Fast forwards media playback. |
| PREV (Previous) | Goes to the previous track/chapter. |
| NEXT | Goes to the next track/chapter. |
| D.MENU (Disc Menu) | Accesses DVD/Blu-ray disc menu. |
| D.CALL (Disc Call) | Specific disc function call. |
| D.AUDIO (Disc Audio) | Changes audio track on disc. |
| SETUP | Accesses system setup menu. |
| SEARCH | Initiates search function. |
| ANGLE | Changes camera angle on DVD/Blu-ray. |
| SUBTITLE | Toggles subtitles on/off or selects subtitle track. |
| PROGRAM | Accesses channel programming or favorite channel setup. |
4. Troubleshooting
- Remote not responding:
- Ensure batteries are inserted correctly with proper polarity (+/-).
- Replace old batteries with new ones.
- Make sure there are no obstructions between the remote and the TV's infrared sensor.
- Confirm the remote is pointed directly at the TV.
- Limited functionality:
- Verify your TV model is listed as compatible. While this remote is broadly compatible, some specific TV functions may vary or require the original remote.
5. Maintenance
- Keep the remote control clean by wiping it with a soft, dry cloth.
- Avoid exposing the remote to extreme temperatures, humidity, or direct sunlight.
- Do not drop the remote or subject it to strong impacts.
- If the remote will not be used for an extended period, remove the batteries to prevent leakage.
6. Specifications
- Model: HTR-D10
- Brand: USARMT
- Connectivity Technology: Infrared
- Compatible Devices: Various Haier Television models (refer to Introduction for list)
- Power Source: 2 x AAA Batteries (not included)
- Special Feature: Ergonomic design, Pre-programmed
7. Warranty and Support
This USARMT HTR-D10 remote control comes with a 30-day hassle-free return policy from the date of purchase. For any issues or support inquiries, please contact your retailer or the manufacturer directly.
Please retain your proof of purchase for warranty claims.