1. Introduction
Thank you for choosing the Philips Avent Anti-Colic Bottle. This bottle is designed to help reduce colic, gas, and discomfort by keeping air away from your baby's tummy. The unique AirFree™ vent is engineered to draw air away from the nipple, ensuring the teat remains full of milk during upright feeding. Please read this manual carefully before use and retain it for future reference.
Image 1.1: Philips Avent Anti-Colic Bottles (2-pack)
2. Important Safety Information
For your child's safety and health, always follow these instructions:
- Always use this product with adult supervision.
- Never use feeding nipples as a soother.
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Always check food temperature before feeding.
- Keep all components not in use out of children's reach.
- Before each use, inspect the product. Pull the feeding nipple in all directions. Discard at the first signs of damage or weakness.
- Do not store a feeding nipple in direct sunlight or heat, or leave in disinfectant ("sterilizing solution") for longer than recommended, as this may weaken the nipple.
- Do not allow product to come into contact with oil-based foods (e.g., oil/tomato-based sauces) as staining will occur.
3. Components
The Philips Avent Anti-Colic bottle consists of the following parts:
- Protective Cap
- Screw Ring
- Nipple
- AirFree™ Vent
- Bottle (260ml / 9oz)
Image 3.1: Key components of the Philips Avent Anti-Colic Bottle
4. Setup and Assembly
Before first use, disassemble all parts, clean them thoroughly, and sterilize them. For assembly, follow these steps:
- Insert the nipple into the screw ring until it clicks into place. Ensure the nipple is pulled through evenly.
- Place the AirFree™ vent into the bottle, ensuring the vent is aligned with the neck of the bottle.
- Screw the assembled nipple and screw ring onto the bottle.
- Place the protective cap over the nipple.
Image 4.1: The AirFree™ Vent, designed to keep air out of the nipple.
5. Operating and Usage
To ensure optimal anti-colic performance, always position the bottle correctly during feeding.
- Filling: Fill the bottle with the desired amount of milk or formula.
- Positioning: When feeding, ensure the AirFree™ vent is positioned upwards, keeping the nipple full of milk and minimizing air intake.
- Feeding: Hold the bottle so that the nipple is always full of milk, even when the baby is feeding in an upright position.
Image 5.1: Proper feeding technique with the Anti-Colic bottle.
6. Cleaning and Maintenance
Proper cleaning and sterilization are crucial for hygiene.
- Disassembly: Disassemble all parts before cleaning.
- Cleaning: Wash all components in warm soapy water immediately after each use. Rinse thoroughly. A bottle brush can be used for effective cleaning.
- Dishwasher: This product is not dishwasher compatible. Hand washing is recommended.
- Sterilization: Sterilize all cleaned parts using a Philips Avent sterilizer, by boiling for 5 minutes, or using a cold water sterilization solution according to the manufacturer's instructions.
- Microwave: The bottle is microwaveable for heating contents, but ensure the cap and nipple are removed before microwaving. Always stir heated food to ensure even heat distribution and check temperature before feeding.
- Storage: Store all clean and dry components in a dry, covered container.
7. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Bottle leaks during feeding. | Nipple or screw ring not assembled correctly, or components are damaged. | Ensure nipple is pulled through the screw ring evenly and the screw ring is tightened properly. Inspect all parts for damage and replace if necessary. |
| Baby is still experiencing colic symptoms. | AirFree™ vent not positioned correctly, or other factors contributing to colic. | Ensure the AirFree™ vent is always pointing upwards during feeding. Consult a healthcare professional if colic persists. |
| Nipple flow is too fast or too slow. | Incorrect nipple flow rate for baby's age/feeding stage. | Philips Avent offers nipples with different flow rates. Ensure you are using the appropriate flow rate for your baby's age and feeding needs. |
8. Specifications
- Model Number: SCF813/24
- Capacity: 260 Milliliters (9 oz)
- Material: Polypropylene (PP)
- Bottle Type: Vented Bottle
- Nipple Type: Vented
- Target Gender: Unisex
- Age Range: Baby
- Dishwasher Safe: No
- Microwaveable: Yes (bottle only, without nipple/cap)
- Product Dimensions: 6.9 x 6.9 x 16 cm
- Item Weight: 78 g (per bottle)
- Manufacturer: Philips Electronics Singapore Pte Ltd
9. Warranty and Support
For warranty information or product support, please refer to the Philips Avent official website or contact Philips customer service in your region. Keep your proof of purchase for any warranty claims.
You can visit the official Philips store for more information: Philips Store on Amazon.sg
