1. Introduction
This instruction manual provides essential information for the safe installation, operation, and maintenance of your Varaluz 287W02BL Sawyers Bar Wall Sconce. Please read this manual thoroughly before beginning installation and retain it for future reference. Proper installation and adherence to these guidelines will ensure optimal performance and safety.
The Varaluz Sawyers Bar Wall Sconce features a design inspired by historical mining aesthetics, combining solid and perforated steel panels with a coppery metallic interior. This fixture provides a unique lighting effect suitable for indoor environments.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for indoor use only. Do not expose to water or moisture.
- Ensure the mounting surface is structurally sound and can support the weight of the fixture.
- Use only the specified bulb type and wattage to avoid fire hazards.
- Do not install this fixture on a dimmer switch unless the bulbs used are compatible with dimming.
- Handle glass components with care to prevent breakage.
- Keep flammable materials away from the light fixture when in operation.
3. Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.
- Varaluz 287W02BL Sawyers Bar Wall Sconce (1)
- Mounting Hardware Kit (includes mounting bracket, screws, wire nuts)
- Instruction Manual (this document)
Note: Light bulbs are not included and must be purchased separately.
4. Setup and Installation
Professional installation by a qualified electrician is recommended.
- Prepare for Installation:
- Turn off the electrical power at the main fuse box or circuit breaker.
- Carefully unpack the fixture and its components. Place all parts on a clean, flat surface.
- Attach Mounting Bracket:
- Secure the mounting bracket to the electrical junction box in the wall using the provided screws. Ensure the bracket is firmly attached.
- Make Electrical Connections:
- Connect the fixture's black wire to the house's black (hot) wire using a wire nut.
- Connect the fixture's white wire to the house's white (neutral) wire using a wire nut.
- Connect the fixture's ground wire (bare copper or green) to the house's ground wire and to the mounting bracket's ground screw.
- Carefully tuck all wires into the junction box.
- Mount the Fixture:
- Align the fixture's backplate with the mounting bracket and secure it with the provided screws. Ensure the fixture is flush against the wall and stable.
- Install Bulbs:
- Insert two (2) E26 medium base incandescent bulbs (up to 100 watts each, not included) into the sockets. Do not overtighten.
- Restore Power:
- Turn the electrical power back on at the main fuse box or circuit breaker.
- Test the fixture to ensure it functions correctly.
Figure 1: Product dimensions showing a height of 19 inches and a width of 10 inches.
Figure 2: Front view of the Varaluz Sawyers Bar Wall Sconce, showcasing its black finish and two exposed bulbs behind a perforated steel panel.
5. Operating Instructions
Once installed and powered, the Varaluz 287W02BL Sawyers Bar Wall Sconce operates via a standard wall switch connected to its electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.
- Ensure bulbs are securely screwed into their sockets for proper contact.
- This fixture is compatible with 110/220V electrical systems.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your wall sconce.
Cleaning
- Always disconnect power before cleaning.
- Wipe the fixture with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
Bulb Replacement
- Turn off power at the circuit breaker before replacing bulbs.
- Allow bulbs to cool completely before touching them.
- Unscrew the old bulb counter-clockwise and screw in the new E26 medium base incandescent bulb (max 100 watts) clockwise.
- Ensure the new bulb is fully seated in the socket.
Figure 3: Close-up of the fixture's upper section, showing the bulb behind the perforated steel panel.
7. Troubleshooting
If you experience issues with your wall sconce, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wire connections Faulty bulb Faulty wall switch | Check circuit breaker/fuse. Ensure all wire connections are secure (power off first). Replace bulb. Test wall switch or consult an electrician. |
| Light flickers | Loose bulb Incorrect bulb type Loose wire connection | Tighten bulb. Ensure correct E26 incandescent bulb is used. Check wire connections (power off first). |
| Fixture hums | Incompatible dimmer switch Loose components | Ensure dimmer is compatible with incandescent bulbs. Check if all mounting screws are tight. |
If troubleshooting steps do not resolve the issue, contact customer support or a qualified electrician.
8. Specifications
| Model Number | 287W02BL |
| Brand | Varaluz |
| Fixture Type | Wall Sconce |
| Color | Black |
| Material | Alloy Steel |
| Dimensions (H x W x D) | 19 x 10 x 6.25 inches |
| Item Weight | 6 Pounds |
| Number of Lights | 2 |
| Bulb Base | E26 Medium Base |
| Max Wattage per Bulb | 100 Watts |
| Voltage | 110/220 Volts (Compatible) |
| Light Source Type | Incandescent (compatible with LED/CFL equivalent) |
| Indoor/Outdoor Use | Indoor Use Only |
| Certification | CSA Listed |
| Mounting Type | Protruding |
| Backplate Dimensions | 6" diameter x 12" width x 0.63" thick |
9. Warranty Information
This Varaluz product is covered by a manufacturer's lifetime limited warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific details regarding warranty coverage, limitations, and how to file a claim, please refer to the official Varaluz warranty documentation or contact Varaluz customer support.
10. Customer Support
If you have any questions, require technical assistance, or need to report a missing or damaged part, please contact Varaluz customer support. For the most current contact information, please visit the official Varaluz website or refer to your purchase documentation.
Please have your model number (287W02BL) and purchase date available when contacting support.
