1. Introduction
The ELNUR GABARRON G Control Distributor is a sophisticated device designed to provide seamless control over your Wi-Fi enabled heating systems, including Deligens stations, Ingenium radiators, Ecombi Plus heat storage heaters, and Matera electric boilers. This manual provides detailed instructions to help you set up, operate, and maintain your G Control Distributor for optimal performance and energy management.
With the G Control Distributor, you can access and manage all features of your connected heating devices remotely. It allows for real-time monitoring of consumption data and historical information for each connected transmitter. You can adjust schedules, set temperatures, and optimize energy usage from anywhere in the world using the free mobile application available for iOS, Android, and web platforms. The G Control system supports control of up to 30 channels simultaneously.
2. Safety Information
Please read and understand all safety instructions before installing or operating the G Control Distributor. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the device is installed by a qualified professional in accordance with local electrical codes.
- Do not expose the device to water or excessive humidity.
- Do not open the device casing. There are no user-serviceable parts inside.
- Disconnect power before performing any maintenance or installation procedures.
- Keep the device away from direct heat sources and flammable materials.
- Use only the power adapter and Ethernet cable supplied with the device.
3. Product Overview
The ELNUR GABARRON G Control Distributor is a compact unit designed for easy integration into your home network. Below is an image illustrating the device and its connection ports.
Figure 1: Rear panel of the ELNUR GABARRON G Control Distributor.
The image displays the rear panel of the ELNUR GABARRON G Control Distributor. From left to right, it features a small indicator light (power/status), a micro-USB port for power input, an Ethernet port for network connection, and two smaller indicator lights (network activity/status).
Components:
- G Control Distributor Unit: The main device.
- Power Adapter: For connecting the device to a power outlet.
- Ethernet Cable: For connecting the device to your internet router.
- User Manual: This document.
4. Setup
Follow these steps to set up your G Control Distributor:
- Placement: Choose a central location near your internet router and a power outlet. Ensure it is within range of your Wi-Fi enabled heating devices.
- Connect Power: Connect the supplied power adapter to the micro-USB port on the G Control Distributor and plug it into a power outlet. The power indicator light should illuminate.
- Connect to Router: Use the provided Ethernet cable to connect the Ethernet port on the G Control Distributor to an available LAN port on your internet router. The network indicator lights on the distributor should show activity.
- Download App: Download the official ELNUR GABARRON G Control app from your device's app store (iOS App Store or Google Play Store) or access the web application.
- Account Creation & Device Pairing: Open the app and follow the on-screen instructions to create an account. Once logged in, proceed to add your G Control Distributor and pair your compatible ELNUR GABARRON heating devices (e.g., Deligens, Ingenium, Ecombi Plus, Matera) to the system. Refer to the app's in-app guide for specific pairing instructions for each heater type.
5. Operating Instructions
Once set up, you can control your heating system using the ELNUR GABARRON G Control app.
5.1 App Interface Overview
The app provides a user-friendly interface to manage your heating devices. Key sections typically include:
- Dashboard: Quick overview of all connected devices and their current status.
- Device List: A list of all paired heaters, allowing individual control.
- Scheduling: Create and manage heating schedules for different zones or devices.
- Statistics: View historical energy consumption data for each device.
- Settings: Configure system preferences, user profiles, and notifications.
5.2 Basic Operations
- Turning Heaters On/Off: Select a heater from the device list and toggle its power status.
- Adjusting Temperature: For compatible heaters, use the temperature slider or input field to set the desired temperature.
- Setting Schedules: Navigate to the scheduling section to create daily or weekly heating programs. You can define different temperature settings for various times of the day.
- Monitoring Consumption: Access the statistics section to view real-time and historical energy usage, helping you optimize consumption.
5.3 Advanced Features
- Zone Control: Group multiple heaters into zones for simultaneous control.
- Away Mode: Activate an energy-saving mode when you are away from home.
- Firmware Updates: The app will notify you of available firmware updates for your G Control Distributor and connected heaters. Follow the prompts to ensure your devices are running the latest software.
6. Maintenance
The ELNUR GABARRON G Control Distributor requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, solvents, or strong chemicals.
- Ventilation: Ensure the device is placed in a well-ventilated area and that its vents are not obstructed.
- Software Updates: Regularly check for and install software updates through the ELNUR GABARRON G Control app. These updates often include performance improvements and security enhancements.
- Cable Connections: Periodically check all cable connections (power and Ethernet) to ensure they are secure.
7. Troubleshooting
If you encounter issues with your G Control Distributor, refer to the table below for common problems and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | No power, faulty adapter, loose connection. | Check power outlet, ensure adapter is securely connected, try a different outlet. |
| Cannot connect to the internet. | Ethernet cable loose, router issue, network configuration. | Ensure Ethernet cable is securely connected to both the distributor and router. Restart your router. Check router settings. |
| Heaters not responding to app commands. | Heaters not paired, out of range, G Control Distributor offline. | Verify heaters are correctly paired in the app. Ensure heaters are within wireless range of the distributor. Check distributor's internet connection. |
| App not loading or crashing. | Outdated app version, device compatibility, temporary software glitch. | Update the app to the latest version. Restart your mobile device. Reinstall the app if necessary. |
If the problem persists after trying these solutions, please contact ELNUR GABARRON customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | ELNUR GABARRON |
| Model Number | 90000095 |
| Product Dimensions | 10 x 7.5 x 3.5 cm |
| Item Weight | 180 grams |
| Color | White |
| Voltage | 240 Volts |
| Display Type | Touchscreen (referring to compatible heaters/app interface) |
| Batteries Required | No |
| Manufacturer | Elnur |
| GTIN | 08432336611100 |
9. Warranty and Support
ELNUR GABARRON products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ELNUR GABARRON website.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact ELNUR GABARRON customer service. For the most current contact information, please refer to the official ELNUR GABARRON website or the documentation included with your product.
- Official Website: www.elnurgabarron.com
- Email: Please refer to the official website.
- Phone: Please refer to the official website.
When contacting support, please have your product model number (90000095) and purchase date available.