Quooker 22FSBLK

Quooker Fusion Square Combi Boiling Water Tap User Manual

Model: 22FSBLK

Brand: Quooker

Product Overview

The Quooker Fusion Square Combi is an innovative kitchen appliance that combines a mixer tap with a boiling water tap, providing instant 100°C boiling water, as well as hot and cold water, all from a single spout. Designed for efficiency and safety, this system features a compact boiler unit that is installed discreetly under your kitchen sink, while the elegant tap sits on your countertop. Its patented high-vacuum insulation ensures minimal energy consumption, making it an economical choice for modern kitchens. The Fusion Square Combi is equipped with advanced safety features, including a child-safe control mechanism and a double-walled spout that remains cool to the touch, preventing accidental burns.

Quooker Fusion Square tap and Combi boiler unit

Image: The Quooker Fusion Square tap in black, alongside the Quooker Combi boiler unit. This setup provides instant boiling, hot, and cold water.

Setup and Installation

The Quooker Fusion Square Combi system requires professional installation to ensure proper functionality and adherence to safety standards. The installation process typically involves mounting the tap on the kitchen countertop and connecting the Combi boiler unit within the cabinet below. All necessary water and electrical connections must be made by a qualified professional.

Key Components:

Quooker Fusion Square tap and Combi boiler unit, side view

Image: A side view of the Quooker Fusion Square tap and the Combi boiler, illustrating their relative sizes and components.

Pre-Installation Considerations:

Operating Instructions

The Quooker Fusion Square Combi tap is designed for intuitive and safe operation, providing instant access to boiling, hot, and cold water.

Accessing Boiling Water (100°C):

  1. Activate Child Safety: Push the textured ring on the tap handle down twice.
  2. Rotate and Hold: While holding the ring down, turn it clockwise. The light ring on the tap will illuminate red, indicating boiling water is being dispensed.
  3. Dispense: Hold your container under the tap. The boiling water will flow as a fine spray, not a solid jet, which helps prevent scalding.
  4. Stop Flow: Release the ring to stop the flow of boiling water.
Close-up of Quooker Fusion Square tap

Image: A close-up view of the Quooker Fusion Square tap, highlighting the textured ring for child-safe operation.

Person dispensing boiling water from Quooker tap

Image: A user demonstrating the dispensing of boiling water from the Quooker Fusion Square tap, with visible steam.

Accessing Hot and Cold Water:

Person using Quooker tap for general water dispensing

Image: A user operating the Quooker Fusion Square tap for general water use, showcasing its versatility.

Quooker tap dispensing water into a pot for cooking

Image: The Quooker tap dispensing water directly into a pot, demonstrating its convenience for cooking tasks.

Quooker tap dispensing water into a pot on a stove

Image: The Quooker tap providing water for a cooking application, highlighting its integration into kitchen activities.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your Quooker Fusion Square Combi system.

Cleaning the Tap:

Descaling the Boiler:

Depending on the hardness of your local water, the Combi boiler may require periodic descaling. Signs of limescale buildup include reduced water flow or unusual noises from the boiler. It is recommended to consult a qualified technician for descaling procedures or refer to the specific descaling instructions in the full product manual.

Filter Replacement:

While not explicitly detailed in the product description, many boiling water systems utilize filters to maintain water quality and prevent limescale. If your Quooker system includes a filter, follow the manufacturer's guidelines for replacement intervals, typically every 6-12 months, or as indicated by a service light.

Troubleshooting

This section addresses common issues you might encounter with your Quooker Fusion Square Combi system. For more complex problems, contact customer support.

ProblemPossible CauseSolution
No boiling water dispensed.Child safety mechanism not fully engaged; boiler not powered; boiler fault.Ensure the child safety ring is pushed down twice and rotated correctly. Check power supply to the boiler. If problem persists, contact service.
Low water flow from tap.Limescale buildup in tap or boiler; kinked hose.Check for kinks in hoses. Descale the boiler if necessary (professional service recommended).
Tap dripping after use.Normal residual drip; worn O-rings or seals.A slight drip after boiling water is normal as the spout cools. If persistent or excessive, contact service.
Unusual noise from boiler.Limescale buildup; air in the system.This can be a sign of limescale. Professional descaling may be required. Ensure proper water flow.

Specifications

Detailed technical specifications for the Quooker Fusion Square Combi system.

FeatureDetail
ManufacturerQuooker
Model Number22FSBLK
ASINB079M3DZVM
ColorBlack
FinishBlack
Material (Tap)Brass/Metallic Alloy
Material (Handle)Stainless Steel
Installation MethodSingle Hole
Number of Handles1
Special FeaturesOn-demand boiling water, child-proof handle, energy-efficient design
Included ComponentsBoiler, Mixer Tap
Product Dimensions (Package)56 x 35 x 26 cm
Item Weight10 Kilograms

Warranty and Support

For information regarding the product warranty, please refer to the documentation included with your purchase or contact your retailer. Quooker products typically come with a manufacturer's warranty covering defects in materials and workmanship.

For technical support, spare parts, or service inquiries, please visit the official Quooker website or contact their authorized service centers. Ensure you have your model number (22FSBLK) and purchase details ready when seeking support.

Related Documents - 22FSBLK

Preview Quooker Boiling Water Tap: Tips for Use and Maintenance
Comprehensive guide to using and maintaining your Quooker boiling water tap, covering features like the light ring, tap protection, descaling, water filter, and warranty information.
Preview Quooker Installation Guide: Taps and Boiling Water Tanks
Comprehensive installation guide for Quooker taps and boiling water tanks, covering technical specifications, package contents, step-by-step installation for various models (Nordic, Fusion, Flex, Front) with PRO3, COMBI, and COMBI+ tanks, maintenance, and troubleshooting.
Preview Quooker System Configurator: Choose Your Tap and Reservoir
A guide to assembling your Quooker system. Learn how to select the right Quooker tap and boiling water reservoir (PRO3, COMBI+, COMBI) and optionally add a CUBE for chilled and sparkling water. Find the perfect Quooker solution for your kitchen.
Preview Quooker Nordic Mixer Taps Installation Guide: Setup, Use & Maintenance
Comprehensive installation guide for Quooker Nordic Round and Square mixer taps. Learn about setup, technical specifications, usage, and maintenance for your boiling-water and mixer tap system.
Preview Quooker Important Information: Operation, Maintenance, and Registration
Concise guide for Quooker boiling water tap users, covering operation, first use, cleaning, maintenance, and product registration for optimal performance.
Preview How to Descale Your Quooker Boiling Water Tank
Detailed instructions for descaling Quooker PRO3-VAQ, PRO3-VAQ E, COMBI, and COMBI E boiling water tanks. Learn how to identify your tank type and follow step-by-step procedures for safe and effective descaling.