Introduction
This manual provides instructions for the safe and effective use of your ONN ONA17CA001 58-inch Tripod. Please read this manual thoroughly before operating the device and retain it for future reference.
The ONN 58-inch Tripod is designed to provide stable support for cameras and camcorders, facilitating clear and steady image capture. It features a 3-way fluid pan-head, a quick-release plate, and a dual-bubble level for precise adjustments. The tripod extends to 58 inches and folds to 23 inches for portability, with a maximum load capacity of 5 pounds.
Safety Information
- Do not exceed the maximum load capacity of 5 pounds (2.27 kg). Overloading can cause instability and damage to the tripod or attached equipment.
- Ensure all leg locks and head adjustments are securely tightened before leaving the camera unattended.
- Avoid placing the tripod on uneven or unstable surfaces.
- Keep hands and fingers clear of moving parts when adjusting the tripod.
- Do not expose the tripod to extreme temperatures or harsh weather conditions for prolonged periods.
- Store the tripod in its carrying bag when not in use to protect it from dust and damage.
Package Contents
- ONN ONA17CA001 58-inch Tripod
- Carrying Bag
Setup
1. Unfolding the Tripod
Carefully remove the tripod from its carrying bag. Extend the legs one section at a time by releasing the leg locks. Ensure each section is fully extended and the leg locks are securely fastened before proceeding.
Image: The ONN ONA17CA001 58-inch Tripod shown fully extended with legs locked.
2. Adjusting Tripod Height
To adjust the height, release the leg locks on each leg and extend them to the desired length. Securely fasten the leg locks. For additional height, extend the center column by loosening its locking knob, raising the column, and then tightening the knob.
3. Attaching Your Camera/Camcorder
- Locate the quick-release plate on the tripod head.
- Release the quick-release plate lever and remove the plate from the tripod head.
- Attach the quick-release plate to the bottom of your camera or camcorder by screwing the mounting screw into the device's tripod socket. Ensure it is finger-tight.
- Align the quick-release plate with the tripod head and reinsert it, ensuring it clicks securely into place. Lock the quick-release plate lever.
Operating
1. Using the 3-Way Fluid Pan-Head
The 3-way fluid pan-head allows for independent adjustments of pan (horizontal rotation), tilt (vertical rotation), and portrait/landscape orientation. Each axis has a dedicated locking knob or handle.
- Pan Adjustment: Loosen the pan locking knob (usually at the base of the head) to rotate the camera horizontally. Tighten to secure.
- Tilt Adjustment: Loosen the tilt handle to adjust the camera's vertical angle. Tighten the handle to secure.
- Portrait/Landscape Adjustment: Loosen the side knob to tilt the camera for portrait orientation. Tighten to secure.
2. Utilizing the Dual-Bubble Level
The dual-bubble level helps ensure your camera is perfectly level for straight horizons and accurate compositions. Adjust the tripod legs and/or the head until both bubbles are centered within their respective indicators.
3. Transporting the Tripod
Before transport, remove your camera, collapse the center column, and retract all leg sections. Secure all leg locks and head adjustments. Place the folded tripod into the provided carrying bag for protection and ease of transport.
Maintenance
- Cleaning: Wipe the tripod with a soft, dry cloth after each use to remove dust and dirt. For stubborn grime, use a slightly damp cloth and then dry thoroughly. Avoid abrasive cleaners or solvents.
- Lubrication: The fluid pan-head is factory-lubricated and generally does not require additional lubrication. If movements become stiff, consult customer support.
- Storage: Store the tripod in a cool, dry place, preferably in its carrying bag, away from direct sunlight and extreme temperatures.
- Inspection: Periodically check all screws, knobs, and leg locks for tightness. Tighten any loose components. Inspect rubber feet for wear and tear.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tripod is unstable. | Leg locks not fully engaged; uneven surface; overloaded. | Ensure all leg locks are securely fastened. Move to a level surface. Verify camera weight does not exceed 5 lbs. |
| Camera not securely attached. | Quick-release plate not tightened to camera; quick-release plate not locked into head. | Tighten the mounting screw on the quick-release plate to the camera. Ensure the quick-release plate lever is locked on the tripod head. |
| Head movement is stiff or loose. | Locking knobs are too tight or too loose. | Adjust the pan and tilt locking knobs to achieve desired tension. Do not overtighten. |
Specifications
- Model: ONA17CA001
- Maximum Height: 58 inches (147.3 cm)
- Folded Length: 23 inches (58.4 cm)
- Load Capacity: 5 pounds (2.27 kg)
- Head Type: 3-Way Fluid Pan-Head
- Material: Aluminum (legs), Plastic/Rubber (head components, feet)
- Item Weight: 2.9 pounds (1.32 kg)
- Features: Quick-release plate, Dual-bubble level, Rubber-grip feet
- Compatible Devices: Cameras, Camcorders
Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the point of purchase or visit the official ONN website. Keep your purchase receipt as proof of purchase for warranty claims.
Online Support: www.onnproducts.com/support (Example link, actual link may vary)
Customer Service: Refer to your product packaging or the ONN website for contact details.