ONN ONA16TM014E
Contents
ONN Full Motion Articulating Tilt/Swivel Universal Wall Mount Kit
Model: ONA16TM014E
Introduction
This instruction manual provides detailed guidance for the installation, operation, and maintenance of your ONN Full Motion Articulating Tilt/Swivel Universal Wall Mount Kit. Designed to securely hold flat panel TVs ranging from 19 inches to 84 inches, this mount offers versatile viewing angles and helps save space. Please read this manual thoroughly before installation and retain it for future reference.
Setup and Installation
Proper installation is crucial for the safety and performance of your TV wall mount. It is recommended to have at least two people for installation. Ensure you have the necessary tools before beginning.
Package Contents
- Wall Mount Assembly
- Mounting Hardware Kit (various screws, anchors, washers)
- 10-foot HDMI 2.0 Cable
- Instruction Manual
Required Tools (Not Included)
- Stud finder
- Drill with appropriate drill bits
- Level
- Phillips head screwdriver
- Socket wrench or adjustable wrench
- Pencil
- Measuring tape
Installation Steps
- Select Mounting Location: Choose a wall location that can support the combined weight of the mount and your TV (up to 132 lbs). Ensure there are no hidden electrical wires or plumbing in the drilling path.
- Locate Wall Studs: Use a stud finder to locate the center of two adjacent wood studs. Mark the stud locations. For concrete or brick walls, use appropriate anchors (not always included, refer to hardware kit).
- Attach Wall Plate: Position the wall plate at the desired height and level it. Mark the drilling points. Drill pilot holes into the studs or for anchors. Secure the wall plate to the wall using the provided lag bolts and washers.
- Attach TV Brackets: Attach the vertical mounting brackets to the back of your TV using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and level on the TV.
- Hang TV on Mount: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated.
- Secure TV to Mount: Locate the security screws at the bottom of the TV brackets and tighten them to prevent the TV from accidentally lifting off the mount.
- Connect HDMI Cable: Use the included 10-foot HDMI 2.0 cable to connect your TV to your desired media device.

Image: The ONN Full Motion Articulating TV Wall Mount Kit, showing the wall plate, articulating arms, and TV mounting plate, along with the included HDMI cable.
Operating the Mount
Your ONN wall mount is designed for flexible viewing, allowing you to adjust your TV's position with ease.
Articulating Movement
The mount features articulating arms that allow you to extend your TV out from the wall. The extension range is from a minimum of 2.64 inches to a maximum of 19 inches, providing ample space for cable management and access.
Swivel Function
You can swivel your TV left and right up to 180 degrees, depending on your TV size and wall clearance. This allows for optimal viewing from various positions within a room.
Tilt Adjustment
The mount supports a tilt range of 12 degrees up and 12 degrees down. This feature helps reduce glare and provides a comfortable viewing angle, whether you are sitting or standing.
To adjust the tilt, loosen the tilt adjustment knobs or screws on the TV mounting plate, set the desired angle, and then securely tighten them to lock the TV in place.
Maintenance
Regular maintenance ensures the longevity and safe operation of your wall mount.
- Cleaning: Use a soft, dry cloth to clean the mount. Avoid abrasive cleaners or solvents that could damage the finish.
- Periodic Inspection: Every few months, check all screws and bolts to ensure they are tight and secure. Over time, vibrations or frequent adjustments can cause fasteners to loosen.
- Lubrication: The articulating joints are designed for smooth movement. If you notice any stiffness, a small amount of silicone-based lubricant can be applied to the moving parts, avoiding contact with electrical components.
Troubleshooting
If you encounter issues with your wall mount, refer to the following common problems and solutions.
TV is not level after installation
- Solution: Check the wall plate and TV brackets with a level. If the wall plate is not level, you may need to re-adjust its position on the wall. If the TV brackets are not level on the TV, loosen them, adjust, and re-tighten.
Difficulty moving the articulating arm or adjusting tilt/swivel
- Solution: Some joints may be factory-tightened for shipping. Gently loosen the bolts at the joints slightly to allow for smoother movement. Do not over-loosen to maintain stability. Apply a small amount of silicone lubricant if needed.
TV feels unstable or wobbly on the mount
- Solution: Ensure all mounting screws and bolts are securely tightened, both to the wall and to the TV. Verify that the security screws at the bottom of the TV brackets are fully engaged. Confirm that your TV's weight does not exceed the mount's maximum capacity (132 lbs).
Specifications
| Model Number | ONA16TM014E |
| Compatible TV Sizes | 19" to 84" Flat Panel TVs |
| Weight Capacity | Up to 132 lbs (60 kg) |
| Mounting Type | Wall Mount |
| Movement Type | Swivel, Tilt, Articulating |
| Articulating Extension | 2.64" (min) to 19" (max) from wall |
| Tilt Angle | 12 degrees up / 12 degrees down |
| Swivel Angle | Up to 180 degrees (left/right) |
| Material | Alloy Steel |
| Item Weight | 15.02 pounds |
| Package Dimensions | 26.3 x 10.8 x 2.55 inches |
| UPC | 722699512748 |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official ONN website. Keep your purchase receipt as proof of purchase for any warranty claims.
Legal Disclaimer: Actual product packaging and materials may contain more and different information than what is shown in this manual. We recommend that you do not rely solely on the information presented and that you always read labels, warnings, and directions before using and consuming a product.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.