Make It Real 1305 Terrarium Jewellery Instruction Manual

1. Introduction

This manual provides instructions for assembling the Make It Real 1305 Terrarium Jewellery kit. This kit allows you to create three unique terrarium pendants. Please read all instructions carefully before beginning assembly.

Safety Warning:

• Not suitable for children under 8 years.
• Contains small parts which may present a choking hazard.
• Adult supervision is recommended during assembly.

2. Kit Contents

Before starting, ensure all components listed below are present in your kit:

• 3 x Bottle Pendants
• 3 x Miniature Flowers
• 3 x Gem Charms
• 3 x Metallic Charms
• Chain (sufficient length for 3 necklaces)
• Tweezers
• Various Moss
• 3 x Colors of Sand
• 3 x Colors of Glitter
• 3 x Jump Rings
• 3 x Stoppers
• Instruction Guide (Dream Guide™ magazine)

Image: All components of the Make It Real Terrarium Jewellery kit, including bottles, charms, sand, glitter, moss, and tools.

3. Setup and Preparation

Prepare your workspace before beginning assembly:

1. Choose a clean, flat, and well-lit surface for assembly.
2. Unpack all components from the kit and verify against the contents list.
3. Keep all small parts contained to prevent loss.

4. Operating Instructions (Assembly)

Follow these steps to create your terrarium pendants:

1. Prepare the Bottle: Select one of the clear bottle pendants. Ensure it is clean and dry.
2. Add Sand and Glitter: Carefully pour a small amount of your chosen colored sand into the bottle. You can layer different colors if desired. Add a pinch of glitter for sparkle. Use the tweezers if needed to guide the materials.

   Image: Demonstrates adding colored sand and small decorative gems into a terrarium bottle.

3. Insert Moss and Flowers: Using the tweezers, gently place small pieces of moss into the bottle on top of the sand. Then, add one or more miniature flowers. Arrange them to create your desired terrarium scene.

   Image: Shows the process of adding moss and a miniature flower into a terrarium bottle using tweezers.

4. Seal the Bottle: Once you are satisfied with your terrarium design, firmly insert one of the stoppers into the opening of the bottle. Ensure it is secure to prevent contents from spilling.
5. Attach Charms and Chain: Open a jump ring and attach it to the loop on the stopper. Thread the chain through the jump ring. Then, attach your chosen metallic and gem charms to the jump ring or directly to the chain.
6. Repeat: Follow these steps to create the remaining two terrarium pendants, experimenting with different colors and arrangements.

Image: Three completed terrarium necklaces, each featuring unique internal decorations and external charms.

5. Maintenance

To ensure the longevity of your terrarium jewellery:

• Avoid exposing the pendants to excessive moisture or direct sunlight, which may affect the internal components.
• Clean the exterior of the glass bottles with a soft, dry cloth if needed. Do not use harsh chemicals.
• Store the jewellery in a dry place when not in use to prevent tarnishing of metallic parts.

6. Troubleshooting

If you encounter any issues during or after assembly:

• Stopper comes loose: Ensure the stopper is pushed firmly into the bottle opening. For a more permanent seal, a small amount of craft glue can be applied to the stopper before insertion (adult supervision recommended for glue use).
• Contents shift: If the internal components shift too much, you can carefully remove the stopper and rearrange them using the tweezers.
• Missing parts: If any essential components are missing from your kit, please contact the manufacturer's customer support.

7. Specifications

8. Warranty and Support

Specific warranty details and direct support contact information are not provided within this manual. For warranty inquiries, product support, or to report missing components, please refer to the manufacturer's official website or contact their customer service department directly. The manufacturer is Make It Real.