Playskool Heroes Transformers Rescue Bots Chase the Police-Bot Instruction Manual

Introduction

This manual provides instructions for the Playskool Heroes Transformers Rescue Bots Chase the Police-Bot figure. This toy allows children aged 3 to 7 to convert Chase the Police-Bot between robot mode and motorcycle mode. Please read these instructions carefully before use.

Safety Information

• Age Recommendation: This toy is designed for children aged 3 to 7 years.
• Choking Hazard: The toy contains small parts that may pose a choking hazard for children under 3 years. Adult supervision is recommended.
• Material: Made from plastic. Do not expose to extreme temperatures or open flames.
• Cleaning: Refer to the Maintenance section for proper cleaning instructions.

Setup

The Playskool Heroes Transformers Rescue Bots Chase the Police-Bot figure comes pre-assembled. No batteries or additional assembly are required.

1. Unboxing: Carefully remove the figure from its packaging.
2. Inspection: Before first use, inspect the figure for any loose or damaged parts. If any damage is found, discontinue use and contact customer support.

Figure as packaged, displaying both robot and vehicle forms on the box.

Operating Instructions: Conversion

The Chase the Police-Bot figure features an "Easy 2 Do" conversion mechanism, allowing transformation between robot and motorcycle modes.

Converting from Robot Mode to Motorcycle Mode

1. Fold Arms: Gently fold the robot's arms inwards towards its body.
2. Position Legs: Bring the robot's legs together and align them.
3. Rotate Body: Rotate the upper body and head section to align with the legs, forming the main body of the motorcycle.
4. Form Wheels: Adjust the parts that form the wheels into their correct position for the motorcycle.
5. Secure: Ensure all parts click into place securely to form the complete motorcycle.

Chase the Police-Bot in its motorcycle vehicle mode.

Converting from Motorcycle Mode to Robot Mode

1. Separate Sections: Gently pull apart the sections that form the motorcycle body to begin separating the robot's limbs.
2. Extend Legs: Extend the legs downwards.
3. Extend Arms: Extend the arms outwards from the body.
4. Position Head: Ensure the robot's head is upright and facing forward.
5. Lock into Place: Confirm all parts are fully extended and locked into their robot configuration.

Note: The conversion is designed to be simple for small hands. If resistance is met, do not force the parts. Re-check alignment and try again.

Maintenance

• Cleaning: To clean the figure, wipe it with a damp cloth. Do not submerge in water.
• Storage: Store the figure in a clean, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically check the figure for any signs of wear or damage.

Troubleshooting

• Difficulty Converting: If the figure is difficult to convert, ensure that all previous steps are completed correctly and that no parts are jammed. Apply gentle, even pressure.
• Loose Parts: If any parts become loose, inspect them to ensure they are properly attached. If a part breaks, discontinue use to prevent choking hazards.

Specifications

Warranty and Support

Warranty: This product is sold without a manufacturer's warranty. Please refer to the retailer's return policy for any issues upon purchase.

Customer Support: For further assistance or inquiries, please contact Hasbro customer service. Contact information can typically be found on the Hasbro official website or product packaging.