1. Introduction and Overview
Thank you for choosing KICKER KM65 Marine Coaxial Speakers. These speakers are engineered to deliver high-quality audio performance in demanding marine environments. Featuring robust construction and marine-grade materials, they are designed for durability and exceptional sound reproduction on the water.
The KM65 speakers include interchangeable charcoal and white grilles, allowing for customization to match your vessel's aesthetic. Their design incorporates UV treatments on injection-molded cones, Santoprene surrounds, baskets, and grilles to ensure long-lasting performance against harsh marine elements.
Image: KICKER KM65 Marine Coaxial Speakers, shown with both charcoal and white grille options.
2. Setup and Installation
Proper installation is crucial for optimal performance and longevity of your KICKER KM65 speakers. It is recommended that installation be performed by a qualified marine audio technician.
2.1 Mounting Location
Select a mounting location that provides adequate clearance for the speaker's depth and allows for proper sound dispersion. Ensure the surface is flat and stable.
2.2 Cutting the Mounting Hole
Use the provided mounting template (if included in your package) to accurately mark and cut the speaker opening. Ensure the hole size matches the speaker's dimensions for a secure fit.
2.3 Wiring
Connect the speaker wires to your marine-grade amplifier or head unit. The KM65 speakers have a 4-Ohm impedance. Ensure correct polarity (+ to + and - to -) for optimal sound. The sealed motor structure and locking terminal covers provide protection against the marine environment.
Image: Rear view of the KICKER KM65 speaker, highlighting the sealed motor structure and wiring terminals.
2.4 Grille Installation
Choose between the charcoal or white grilles provided. Align the grille with the speaker and secure it using the appropriate fasteners.
3. Operating Instructions
Once installed, connect your KICKER KM65 speakers to a compatible marine audio system. These speakers are designed for full-range audio reproduction.
3.1 Powering On
Turn on your marine head unit or amplifier. Ensure the volume is set to a low level before playing audio.
3.2 Adjusting Volume and Tone
Gradually increase the volume to your desired listening level. Adjust bass, treble, and balance settings on your head unit or amplifier for optimal sound quality. Avoid excessive volume levels that cause audible distortion, as this can damage the speakers.
4. Maintenance
To ensure the longevity and continued performance of your KICKER KM65 Marine Coaxial Speakers, follow these maintenance guidelines:
- Cleaning: Regularly clean the speaker grilles and cones with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the UV-treated surfaces.
- Inspection: Periodically inspect the speaker surrounds, grilles, and wiring connections for any signs of wear, corrosion, or damage. Address any issues promptly to prevent further deterioration.
- Protection: While the speakers are waterproof and UV-treated, covering them when not in use, especially during prolonged storage or harsh weather, can further extend their lifespan.
5. Troubleshooting
If you experience issues with your KICKER KM65 speakers, consider the following common troubleshooting steps:
- No Sound:
- Check all wiring connections at the speaker and amplifier/head unit for secure contact and correct polarity.
- Ensure the amplifier or head unit is powered on and functioning correctly.
- Verify that the audio source is playing and not muted.
- Distorted Sound:
- Reduce the volume level on your head unit or amplifier.
- Check for loose wiring connections.
- Ensure the amplifier is not overdriven or clipping.
- Inspect speaker cones and surrounds for physical damage.
- Intermittent Sound:
- Examine all wiring for loose connections or corrosion.
- Check the audio source and its connections.
If problems persist after attempting these steps, contact KICKER customer support or a certified marine audio technician.
6. Specifications
| Feature | Specification |
|---|---|
| Model Name | 45KM654 |
| Speaker Size | 6.5 Inches (165mm) |
| Woofer Diameter | 6.5 Inches |
| Tweeter Diameter | 0.75 Inches (20mm) |
| Impedance | 4 Ohms |
| Speaker Maximum Output Power | 130 Watts |
| Frequency Response | Up to 21 KHz |
| Connectivity Technology | Coaxial |
| Material | Plastic (Polypropylene woofer with rubber surround) |
| Special Feature | Hi-Res Audio, Waterproof, UV-treated components |
| Recommended Uses | Marine environments (Boats) |
| Included Components | Pair of speakers, pair of marine-grade grilles (charcoal and white) |
| Product Dimensions | 4.44"D x 8.5"W x 16.5"H |
| Item Weight | 6 Pounds |
| UPC | 713034085096 |
7. Warranty Information
KICKER KM65 Marine Coaxial Speakers come with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official KICKER website. Retain your proof of purchase for warranty claims.
8. Support
For additional support, technical assistance, or to inquire about replacement parts, please visit the official KICKER website at www.kicker.com or contact KICKER customer service directly. You may also consult your authorized KICKER dealer for local support.
