Homelite Genuine OEM Replacement Fuel Cap

Introduction

This document provides instructions for the installation and maintenance of the Homelite Genuine OEM Replacement Fuel Cap, Model 310720026-2PK. This product is designed to replace worn or damaged fuel caps on compatible Homelite and Ridgid outdoor power equipment, ensuring a proper seal for the fuel tank.

Product Overview

Image: Two Homelite Genuine OEM Replacement Fuel Caps. Each cap is silver-colored, round with a scalloped edge for grip, and features an attached metal chain. These caps are designed to seal the fuel tank of compatible outdoor power equipment.

The Homelite 310720026-2PK is a genuine OEM replacement fuel cap, supplied as a 2-pack. It features a twist-on closure type and includes an attached chain to prevent loss. This cap is crucial for maintaining the integrity of your equipment's fuel system.

Installation Instructions

1. Safety First: Ensure the equipment is turned off, cooled down, and on a stable, level surface before beginning any work.
2. Locate Fuel Tank: Identify the fuel tank and the existing fuel cap on your equipment.
3. Remove Old Cap: Carefully twist the old fuel cap counter-clockwise to remove it. Be mindful of any fuel residue.
4. Inspect Tank Opening: Check the fuel tank opening for any debris or damage. Clean if necessary.
5. Install New Cap: Place the new Homelite replacement fuel cap onto the fuel tank opening. Twist clockwise until it is securely tightened. The cap should provide a snug, airtight seal.
6. Consult Owner's Manual: For specific instructions pertaining to your equipment model, always refer to the original owner's manual.

Operating Guidelines

The fuel cap's primary function is to seal the fuel tank, preventing fuel leaks and contamination, and maintaining proper fuel system pressure. Always ensure the cap is securely tightened after refueling to prevent fuel evaporation and potential hazards.

Maintenance

• Regular Inspection: Periodically inspect the fuel cap for cracks, damage, or signs of wear on the sealing gasket.
• Cleanliness: Keep the cap and the fuel tank opening clean from dirt, dust, and debris to ensure a proper seal.
• Replacement: If the cap shows signs of damage or no longer provides a secure seal, replace it immediately with a genuine OEM part to prevent fuel system issues.

Troubleshooting

• Cap Does Not Fit: Verify that the model number of your equipment is listed in the compatibility section. If it is, ensure you are attempting to install it correctly.
• Fuel Leakage: If fuel leaks from around the cap, ensure it is tightened securely. Inspect the cap and the tank's filler neck for any damage or debris that might prevent a proper seal. Replace the cap if damage is found.
• Equipment Performance Issues: A faulty fuel cap can sometimes lead to vacuum issues in the fuel tank, affecting engine performance. If you suspect the cap is the cause, replace it.

Specifications

Compatibility

This replacement fuel cap (310720026-2PK) is compatible with the following Homelite and Ridgid models. Always consult your equipment's owner's manual for the exact part number required.

• Homelite: PS903500, PS903500A, PS905000, PS905000S, PS906025, UT905011
• Ridgid: RD903612, RD905712, RD903612A, RD906812, RD6800B, RD68011B, RD905712B, RD906812A, RD906812B, RD90800S, RD9C7000AG, RD9C7000BG, RD9C7000G

Warranty and Support

For information regarding product warranty, please refer to the official Homelite warranty policy or contact Homelite customer support directly. For technical assistance or further inquiries, please reach out to the manufacturer or your authorized dealer.