Introduction
Thank you for choosing the CLP Lakewood Fabric Bar Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stool. Please read these instructions carefully before assembly and retain them for future reference.
The CLP Lakewood Bar Stool features a solid rubberwood frame and a comfortably upholstered fabric seat. Its design includes decorative brass studs and tufting, providing both style and comfort. The high backrest and integrated footrest ensure a pleasant seating experience for extended periods.
Image: Front view of the CLP Lakewood Fabric Bar Stool in Antique Taupe.
Safety Instructions
- Ensure all components are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
- Assemble the bar stool on a soft, clean surface to prevent scratches.
- Tighten all screws and bolts securely, but do not overtighten. Periodically check and re-tighten all fasteners to maintain stability.
- Do not stand on the bar stool. It is designed for seating only.
- Do not exceed the maximum load capacity of 136 kg (299 lbs).
- Keep children away from the assembly area and small parts.
- Use the bar stool on a level and stable surface to prevent tipping.
Package Contents
Please verify that all the following components are included in your package:
- Upholstered Seat with Backrest (1x)
- Leg Frame Assembly (1x)
- Hardware Pack (screws, washers, Allen key)
If any parts are missing or damaged, please contact CLP customer support.
Setup and Assembly
The CLP Lakewood Bar Stool requires assembly. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage.
- Attach Seat to Frame: Align the pre-drilled holes on the underside of the upholstered seat with the holes on the top of the leg frame. Insert the provided screws and washers. Hand-tighten all screws initially.
- Secure Footrest: Ensure the footrest bars are properly seated and secured within the leg frame. Tighten any associated fasteners.
- Final Tightening: Once all screws are in place, gradually tighten them completely using the provided Allen key. Ensure the stool is stable and level. Do not overtighten.
- Check Stability: Before use, gently rock the stool to ensure it is stable and all connections are secure.
Image: Detail of the sturdy rubberwood leg frame and integrated footrest, showing connection points for assembly.
Operating Instructions
The CLP Lakewood Bar Stool is designed for comfortable seating at bar-height surfaces.
- Seating: Sit centrally on the seat, ensuring your weight is evenly distributed.
- Footrest Use: Utilize the integrated footrest for added comfort and support, especially during prolonged sitting.
- Movement: When moving the stool, lift it rather than dragging it to prevent damage to the legs and floor.
Image: Front view of the fully assembled CLP Lakewood Bar Stool, ready for use.
Maintenance
Proper care will extend the life and appearance of your bar stool.
- Fabric Cleaning: For general cleaning, use a soft cotton cloth dampened with lukewarm water. Gently wipe the fabric surface.
- Vacuuming: Regularly vacuum the fabric upholstery with a suitable upholstery attachment to remove dust and debris.
- Stain Removal: For spills, blot immediately with a clean, dry cloth. Avoid rubbing, which can spread the stain. For stubborn stains, consult a professional upholstery cleaner.
- Avoid Harsh Cleaners: Do not use household detergents, abrasive cleaners, or chemical solvents on the fabric or wood frame, as these can cause damage.
- Wood Care: Wipe the wooden frame with a dry or slightly damp cloth. Avoid excessive moisture.
- Fastener Check: Periodically check all screws and bolts and re-tighten them as necessary to ensure the stool remains stable.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric and drying of the wood.
Image: Detail of the tufted fabric backrest, highlighting the upholstery texture and decorative buttons.
Troubleshooting
If you encounter any issues with your CLP Lakewood Bar Stool, refer to the following common solutions:
- Stool Wobbles:
- Ensure all assembly screws are fully tightened.
- Verify the stool is placed on a level surface.
- Check if any leg glides are missing or uneven.
- Loose Parts:
- Periodically inspect all fasteners and re-tighten them as needed.
- Fabric Damage:
- For minor snags, carefully trim loose threads. For significant damage, professional repair may be required.
If the problem persists, please contact CLP customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 1027822124 |
| Brand | CLP |
| Color | Antique Taupe |
| Material (Frame) | Rubberwood |
| Material (Seat Cover) | Fabric |
| Total Height | 109 cm |
| Total Width | 55 cm |
| Total Depth | 57 cm |
| Seat Height | 74 cm |
| Seat Dimensions (W x D) | 45 x 41 cm |
| Backrest Height | 38 cm |
| Upholstery Thickness | 15 cm |
| Item Weight | 11 kg |
| Maximum Load Capacity | 136 kg |
| Assembly Required | Yes |
Image: Dimensional diagram of the bar stool, illustrating total height, width, depth, seat height, and backrest height.
Warranty and Support
For warranty information or technical support, please contact your retailer or the manufacturer, CLP, directly. Keep your proof of purchase for any warranty claims.
CLP Contact Information: (Please refer to your purchase documentation or the CLP official website for the most current contact details.)
When contacting support, please have your model number (1027822124) and purchase date readily available.
